Jump to content
SAU Community

Recommended Posts

hi, i might be needing to replace my coil packs and would like to get a set that will perform and last... iv noticed that there are the JJR coil packs (which are nicely priced under $400) that iv read and claim to perform as well as splitfire coil packs which people have used for a long time ($500), will the OEM coil packs perform as well as these other two?

would like your feedback or any info on these coil packs or any prefered or recommended brands...

cheers

4drftn

I recently needed new coilpacks for my car...contemplated getting splitfires but went with the JJR ones instead as they were slightly cheaper...i can't compare them to splitfires as i've never used them but the JJR ones do work ok...they would have to i guess as they are newer than the standard 15-17 year old ones i had...not sure how long they'll last though...for now...its all good...one annoying thing with the JJR ones though is that Just Jap has stuck an annoying brand and details sticker on each of them which is a bit of a pain to remove...regardless...if anyone has any concrete results for the JJR coilpacks it would be nice to see...cheers...

Edited by limpus

+1 for this, i'm just curious to find out if the jjr's are good for relatively high powered applications i.e. 400kw'ish

i am interested in buying some but would like to see how they perform first... don't know if adequate spark delivery is much of an issue on rb's once u get high power figures

I ran my old factory RB25 coils to 369rwkw. So stock coils (in good condition) are fine, and many cars have made bigger power than me.

I recently just installed RB26 Splitfires for my RB26 setup, only reason is OEM coils are $$$.

JJR ones havent been around anywhere near as long as Splitfires (and other coils like FET), so IMO at this stage its hard to tell on durability under extended periods/conditions.

Its something that i would take into account when looking for parts as cars with Splitfires have been running for a number of years, JJR ones, lucky if its a few months i think they've been around for?

And no, im not in any way saying the JJR product is garbage.

Unless someone knows what re-branded item the JJR ones stem from? Which would provide more info

Or are they made by JJR themselves? :)

I ran my old factory RB25 coils to 369rwkw. So stock coils (in good condition) are fine, and many cars have made bigger power than me.

I recently just installed RB26 Splitfires for my RB26 setup, only reason is OEM coils are $$$.

JJR ones havent been around anywhere near as long as Splitfires (and other coils like FET), so IMO at this stage its hard to tell on durability under extended periods/conditions.

Its something that i would take into account when looking for parts as cars with Splitfires have been running for a number of years, JJR ones, lucky if its a few months i think they've been around for?

And no, im not in any way saying the JJR product is garbage.

Unless someone knows what re-branded item the JJR ones stem from? Which would provide more info

Or are they made by JJR themselves? :)

Completely agreed. For the extra $100 or so dollars ($510 from Slide or nengun), splitfires have been tried by thousands and you know they can make the power and last. The JJR ones may be just as good or even better, however until they have been tested, i know what i would go for.

any new coils, be they jjr or splitfires, are going to be better than old ones that are arcing out.

the jjr ones are probably ones that they have had made copying splitfires. unless you are chasing big horsepower i'd say they would be fine. if you are only running 250kw or below they would be more than ample if your stock ones aren't up to the job.

yeah, chinese stuff isn't that bad these days (depending). in the bike industry a very large portion of stuff comes from china, most of it good. it is actually the companies that specify what they want the determine whether it is good or not. if they want it to be cheap it will be crap, but if they are willing to pay a bit more they will get good stuff. it is just that there are a lot of people that are getting the cheapest made stuff they can in order to make maximum profit. which means a lot of people buy stuff, and it breaks, which then makes people think that all chinese made stuff is crap. but now china is starting to get expensive so people are going to india and indonesia and vietnam to get things made. taiwan used to be the cheap crap stuff but now it is where better stuff is made.

... in the bike industry a very large portion of stuff comes from china, most of it good.

Don't agree with this statement. All the stuff I've seen from China has been lower quality than the Japanese made stuff. 1/2 the price for sure. And China may make thousands of motorbikes but not that many make it into Australia.

Aftermarket gear they close the gap somewhat, but I won't in general buy china made electronics or important components.

I've got set of jjr coils in my car running 16psi

My std coils used to misfire a little bit with a 0.65mm gap

Opened the gap back to 0.8 with the new ones and no more misfire

Picked up a little off boost power too, from the seat of the pants dyno :worship:

And with a 1 year warranty they're not bad for the price

Very hard to tell just where parts are made these days!!!

Just cos' it has Nike written all over it----------doesn't mean a thing.

You can get parts from USA, Phillipines, Taiwan, China, Korea, Japan Thailand and it could have HKS, Blitz, Chev, Holden, Nissan, Toyota, NEC, LG..........you name it on the label. The parent company controls the quality [or attempts to], but that doesn't mean that other manufacturers can't do the same.

This thread will be a good read. Im thinking of going with these JJR coils when I go back to coil on plug. unless I just replace the commodore coils with MSD ones......seriously thinking of going the JJR option though.

had one of the guys who drops into the workshop use the JJR's and claim that he could run plugs gapped at 1.1 on em like they were 0.8's... that's something standard's can't do, and mean that they do pack a bit of a wallop. they're starting to sound like a real good alternative/performance upgrade.

i guess we might have to wait for a magazine to do a test or something to really know how they perform against each other, as said above some people are a bit iffy when it comes to chinese products but also as said above some of the chinese performance parts are proven to be a good option being a direct replacement of performance upgrade...

does anyone know what the OEM coil packs are priced at???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...