Jump to content
SAU Community

Recommended Posts

It is often hard to start E85 in winter due to the lean mix of unleaded petrol. This is primarily why E70 exists and E-flex is supposed to have an enriched unleaded content during winter.

thats plain crap even E90 start first time every time when tuned right.... thats a lazy tuners excuse straight up.

It can take a few mornings to get right though. I ask my customers to let me know if its not right so we can get it right.

Yeah, lets showcase how good a turbo runs on ethanol when 95% of the customer base is running 98.

:no:

TBH 50-60% of our tuning is now on E85

That is mint. Perfect power curve. Must be crazy fast on road. How do you think this would compare against the original SS2 you made back in the days?

This is a larger all around turbo compare to the older SS2, how ever does not feel laggier, with a much stronger punch, how ever it could be the E70 that I'm using.

E85 is much cleaner fuel, about half of my customers are running / going to run on that fuel system, pump 98 is starting to be a thing of the past. Plus all major car firms are introducing E85 powered cars, so the fuel should soon be available to all states.

Compare to the G2.5 chart, the SS2 shifted the whole power band left by roughly 200RPMs, using 98 it should make just 300rwkws with 200rwkws by 4000RPMs. E70 doesn't appears to make turbos built based in the type B .82 housings any more responsively then pump 98 apart from the top. So what's likely to change is the power band after the turbo hitting full boost, then we can then apply the -40kws peak power rule to calculate the estimate power level of 98 based on E70 result.

The earth quake freaked me abit. I was with a customer whom's here collecting his rebuilt XR6 turbo. When striked, the whole factory walls vibrated for couple of secs. Funny that guy was like: "Arrhh, strong wind, shit weather."

This is a larger all around turbo compare to the older SS2, how ever does not feel laggier, with a much stronger punch, how ever it could be the E70 that I'm using.

E85 is much cleaner fuel, about half of my customers are running / going to run on that fuel system, pump 98 is starting to be a thing of the past. Plus all major car firms are introducing E85 powered cars, so the fuel should soon be available to all states.

Compare to the G2.5 chart, the SS2 shifted the whole power band left by roughly 200RPMs, using 98 it should make just 300rwkws with 200rwkws by 4000RPMs. E70 doesn't appears to make turbos built based in the type B .82 housings any more responsively then pump 98 apart from the top. So what's likely to change is the power band after the turbo hitting full boost, then we can then apply the -40kws peak power rule to calculate the estimate power level of 98 based on E70 result.

The earth quake freaked me abit. I was with a customer whom's here collecting his rebuilt XR6 turbo. When striked, the whole factory walls vibrated for couple of secs. Funny that guy was like: "Arrhh, strong wind, shit weather."

98 will never be a thing of the past, at least not in our lifetime. Oil companies make too much money to let something like E85 have more market share than a non ethanol blended fuel.

The earth quake freaked me abit. I was with a customer whom's here collecting his rebuilt XR6 turbo. When striked, the whole factory walls vibrated for couple of secs. Funny that guy was like: "Arrhh, strong wind, shit weather."

Hahahaha

Lolz were had

98 will never be a thing of the past, at least not in our lifetime. Oil companies make too much money to let something like E85 have more market share than a non ethanol blended fuel.

What choice will they have? If it's at the pump you will have control. It will only ever be seen as a performance fuel by a small percentage of turbo owners though.

hello im looking at getting my r33 s2 turbo high flowed.

i plan on running tomei 256 poncams, blitz se fmic, full split dump 3" running a nistune. im not interested in anymore than 10-12psi and for as close to stock response as possible. wanting to run stock injectors to. what would you recommend for my.application

cheers

patrick

thats plain crap even E90 start first time every time when tuned right.... thats a lazy tuners excuse straight up.

It can take a few mornings to get right though. I ask my customers to let me know if its not right so we can get it right.

It's not "plain crap", many people complain of cold start issues with E85. The fact you need to touch up the tune to improve starting says it's not plain crap. And the issues are the reason why lower ethanol content mixtures make their way to the pumps during colder climates.

http://www.google.com.au/#hl=en&safe=off&sclient=psy-ab&q=e85+%22winter%22&oq=e85+%22winter%22&aq=f&aqi=g1g-K3&aql=&gs_l=serp.12..0j0i30l3.3624.3624.3.4545.1.1.0.0.0.0.245.245.2-1.1.0...0.0.quBJoaG9VYk&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=1e6d9bcbc6bf58bd&biw=1280&bih=672

http://en.wikipedia.org/wiki/Common_ethanol_fuel_mixtures#E70.2C_E75

TBH 50-60% of our tuning is now on E85

Out of interest, what would the split of daily drivers vs garage trophies/weekend warriors be?

I cannot see E85 being relevant to daily, or almost daily drivers until it's available at 50% of sevos across the country.

This is a larger all around turbo compare to the older SS2, how ever does not feel laggier, with a much stronger punch, how ever it could be the E70 that I'm using.

E85 is much cleaner fuel, about half of my customers are running / going to run on that fuel system, pump 98 is starting to be a thing of the past. Plus all major car firms are introducing E85 powered cars, so the fuel should soon be available to all states.

Compare to the G2.5 chart, the SS2 shifted the whole power band left by roughly 200RPMs, using 98 it should make just 300rwkws with 200rwkws by 4000RPMs. E70 doesn't appears to make turbos built based in the type B .82 housings any more responsively then pump 98 apart from the top. So what's likely to change is the power band after the turbo hitting full boost, then we can then apply the -40kws peak power rule to calculate the estimate power level of 98 based on E70 result.

The earth quake freaked me abit. I was with a customer whom's here collecting his rebuilt XR6 turbo. When striked, the whole factory walls vibrated for couple of secs. Funny that guy was like: "Arrhh, strong wind, shit weather."

It'll be a decade or more before 98 is a thing of the past. By then very expensive biofuel, diesel and electricity will be powering our vehicles.

E85 is nice and all, but I'd still imagine the vast majority of your customers would be interested in 98 results. Status might be doing 50% E85 but then he's become a bit of a "go to" tuner for E85 if what I can garner from this forum is anything to go by.

Edited by Cowboy1600

I cannot see E85 being relevant to daily, or almost daily drivers until it's available at 50% of sevos across the country.

Honestly out here in the SE suburbs E85 is all over the place now, you could do it easily if your keen and plan ahead a little.

That said I have only ever seen 1 other car at an E85 pump, it was a flex fuel commodore.

I have been running e85 nearly 3 years now in my daily, back then it was a 1hr round trip to Southland for the 99c ethanol. Now there are 6 servos within 15 minutes of me. Of course it will take off once the pumps are in but the pumps will only go in if there is a market for the fuel. Like I have said many times they will only expand e85 if you all get on board and start driving to the nearest Caltex/United e85 outlet.

This should all be in the e85 thread, I don't like whoring up Stao's Hypergear thread without results to post.

hello im looking at getting my r33 s2 turbo high flowed.

i plan on running tomei 256 poncams, blitz se fmic, full split dump 3" running a nistune. im not interested in anymore than 10-12psi and for as close to stock response as possible. wanting to run stock injectors to. what would you recommend for my.application

cheers

patrick

Save your money on cams. Don't get a split dump, get a 3" bellmouth. Pick one of the hi-flow results from page 1 or an SS1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...