Jump to content
SAU Community

Recommended Posts

Its very unfortunate that Brae have finally gaven up on the simple log manifold design as cyc No. 4 can not be bent that far to suit stock position. I will speak to few other welders and see what other possibilities are. But for the time been I will be assembling my car with what I've got and have that back doing its jobs soon as possible.

surely you could use whoever makes your rear housings and get them to make a modified version of the cast iron hks manifold

(make it so that it bolts on easily)

surely you could use whoever makes your rear housings and get them to make a modified version of the cast iron hks manifold

(make it so that it bolts on easily)

If the goal is stock location the HKS low mount isn't going to be the answer.

If the goal is stock location the HKS low mount isn't going to be the answer.

stock location won't be needed if its gonna come as a whole kit (dump included too)

Looks like I might have to go high mount to keep the costs down. apparently the side mount takes too much efforts to complete. There's one more welder who'm happy to give it a shot, we see how it goes.

What's the verdict on opening up the stock exhaust manifold a bit? Possible? Useful?

Or is that for another thread?

Looks like I might have to go high mount to keep the costs down. apparently the side mount takes too much efforts to complete. There's one more welder who'm happy to give it a shot, we see how it goes.

Is the manifold you posted on the last page a more expensive design or mounts the Turbo in a different location?

That is a $1100 manifold, the log manifold will have 123 goes into one plus and 345 in another. How ever there isn't enough room to merge 345 as the steam pipe bends are too big. If you go back and have a look at how my manifold is constructed, there are lots of efforts and man hours spent.

Yes by die-grinding stock manifold would help on picking up 17kws, pumps it to 297rwkws internally gated.

Do you have the ability to open up stock manifolds? If so, why not try and source say five stock manifolds, prep them and then sell them as part of a kit on an exchange basis? Charge people an extra $100 that you'll refund once they send in their stock manifold.

Might be easier and a shed load cheaper than trying to get your own steam pipe manifold sorted?

Just a thought.

^^^ good idea. I pulled a tonne out of mine. Surprising how poorly the ports matched the head. Plus the collector flange is much smaller than the gasket.

Whoever purchased a ss2 running ext gate is in for a treat.

Just got my car tuned at chequered tuning

Initially got 295 but wanted to be safe so turned back the timing.

So final =

276rwkw

18psi tapering to 16psi

Full boost at 3800

There is an abundance of wheel spin and really quick acceleration . Very happy.

Whoever purchased a ss2 running ext gate is in for a treat.

Just got my car tuned at chequered tuning

Initially got 295 but wanted to be safe so turned back the timing.

So final =

276rwkw

18psi tapering to 16psi

Full boost at 3800

There is an abundance of wheel spin and really quick acceleration . Very happy.

cool, do you think its laggy now?, Stao ran a bit more boost didn't he..21psi tapering to..? be good to see the dyno

sheet

Edited by jet_r31

Yes, In my opinion it is still laggy. But that is greatly outweighed by the power it produces and the smile it puts on my face on boost. Mind you it has performed just as well if not better than Stao has described it would so the turbo for what it is is great.

Mods are as follows

Z32

3" exhaust, no cat, 1 muffler (home-made)

600x400 bar and plate cooler with return flow piping, assuming its home-brand as i only paid $50.

Tial 44mm gate (17.64PSI)

SS2 0.82 type b

52mm Radiator

bcpr7es copper plugs

DW 740cc Injectors accompanied by a Bosch 044 (intank)

EVERYTHING else is standard

post-80628-0-65214000-1345064201_thumb.jpg

post-80628-0-06095100-1345064217_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...