Jump to content
SAU Community

Recommended Posts

Ok thanks Stao.

When you say cut under battery tray it's just the 1 standard hole saw cut through the chassis across as you would in an r33 (that has the battery in boot).

How much was the PWR intercooler. Was trying to find that page when you started reviewing them etc.

Can't wait to get the new high flow

if you are using JJR's piping kit, their pipe diameter is 2.5 inches, so size of the hole is usually cut in 2.75 inches.

The PWR cooler is around $1150, size is in 600x300x81mm, you will need to order that through PWR.

FYP brah! Nice meeting you mate :)

new Mick_O 4" stainless intake, tigged up back purged porn dose pipe lol

(function(){var g=this,h=function(b,d){var a=b.split("."),c=g;a[0]in c||!c.execScript||c.execScript("var "+a[0]);for(var e;a.length&&(e=a.shift());)a.length||void 0===d?c[e]?c=c[e]:c=c[e]={}:c[e]=d};var l=function(b){var d=b.length;if(0<d){for(var a=Array(d),c=0;c<d;c++)a[c]=b[c];return a}return[]};var m=function(b){var d=window;if(d.addEventListener)d.addEventListener("load",b,!1);else if(d.attachEvent)d.attachEvent("onload",b);else{var a=d.onload;d.onload=function(){b.call(this);a&&a.call(this)}}};var n,p=function(b,d,a,c,e){this.f=b;this.h=d;this.i=a;this.c=e;this.e={height:window.innerHeight||document.documentElement.clientHeight||document.body.clientHeight,width:window.innerWidth||document.documentElement.clientWidth||document.body.clientWidth};this.g=c;this.b={};this.a=[];this.d={}},q=function(b,d){var a,c,e=d.getAttribute("pagespeed_url_hash");if(a=e&&!(e in b.d))if(0>=d.offsetWidth&&0>=d.offsetHeight)a=!1;else{c=d.getBoundingClientRect();var f=document.body;a=c.top+("pageYOffset"in window?window.pageYOffset:(document.documentElement||f.parentNode||f).scrollTop);c=c.left+("pageXOffset"in window?window.pageXOffset:(document.documentElement||f.parentNode||f).scrollLeft);f=a.toString()+","+c;b.b.hasOwnProperty(f)?a=!1:(b.b[f]=!0,a=a<=b.e.height&&c<=b.e.width)}a&&(b.a.push(e),b.d[e]=!0)};p.prototype.checkImageForCriticality=function(b){b.getBoundingClientRect&&q(this,b)};h("pagespeed.CriticalImages.checkImageForCriticality",function(b){n.checkImageForCriticality(b)});h("pagespeed.CriticalImages.checkCriticalImages",function(){r(n)});var r=function(b){b.b={};for(var d=["IMG","INPUT"],a=[],c=0;c<d.length;++c)a=a.concat(l(document.getElementsByTagName(d[c])));if(0!=a.length&&a[0].getBoundingClientRect){for(c=0;d=a[c];++c)q(b,d);a="oh="+b.i;b.c&&(a+="&n="+b.c);if(d=0!=b.a.length)for(a+="&ci="+encodeURIComponent(b.a[0]),c=1;c<b.a.length;++c){var e=","+encodeURIComponent(b.a[c]);131072>=a.length+e.length&&(a+=e)}b.g&&(e="&rd="+encodeURIComponent(JSON.stringify(s())),131072>=a.length+e.length&&(a+=e),d=!0);t=a;if(d){c=b.f;b=b.h;var f;if(window.XMLHttpRequest)f=new XMLHttpRequest;else if(window.ActiveXObject)try{f=new ActiveXObject("Msxml2.XMLHTTP")}catch(k){try{f=new ActiveXObject("Microsoft.XMLHTTP")}catch(u){}}f&&(f.open("POST",c+(-1==c.indexOf("?")?"?":"&")+"url="+encodeURIComponent(b)),f.setRequestHeader("Content-Type","application/x-www-form-urlencoded"),f.send(a))}}},s=function(){var b={},d=document.getElementsByTagName("IMG");if(0==d.length)return{};var a=d[0];if(!("naturalWidth"in a&&"naturalHeight"in a))return{};for(var c=0;a=d[c];++c){var e=a.getAttribute("pagespeed_url_hash");e&&(!(e in b)&&0<a.width&&0<a.height&&0<a.naturalWidth&&0<a.naturalHeight||e in b&&a.width>=b[e].k&&a.height>=b[e].j)&&(b[e]={rw:a.width,rh:a.height,ow:a.naturalWidth,oh:a.naturalHeight})}return b},t="";h("pagespeed.CriticalImages.getBeaconData",function(){return t});h("pagespeed.CriticalImages.Run",function(b,d,a,c,e,f){var k=new p(b,d,a,e,f);n=k;c&&m(function(){window.setTimeout(function(){r(k)},0)})});})();pagespeed.CriticalImages.Run('/ngx_pagespeed_beacon','http://www.sau.com.au/forums/index.php?app=forums&module=ajax&section=topics&do=quote&t=261613&p=7655290&md5check=8cdeeff961670f4c11858b2ef4b63011&isRte=1,6YgIICLrb3,true,false,Zv-j9HDt7C0');data:image/gif;base64,R0lGODlhCAAKAIABAAAAAP///yH5BAEAAAEALAAAAAAIAAoAAAISTIBmoLy9XDqyxktfkuo05AQFADs= 20151219_141746.jpg

data:image/gif;base64,R0lGODlhCAAKAIABAAAAAP///yH5BAEAAAEALAAAAAAIAAoAAAISTIBmoLy9XDqyxktfkuo05AQFADs= 20151219_141759.jpg

Geez. Yeah.

Ok re. PWR intercooler that's pricey.

Looking at other options as I would like to make close to the 300rwkw and would be annoyed if the return flow was a bit of a limit. I would hate to have to fit twice

I can get a HDi GT2 non return kit for about $600 that is 600x300x80 or a blitz (non return) standard edition for about $450 that Core Size - 620 x 266 x 76mm or the trusty old cooling pro.

I'm assuming that the above are all preferred compared to return flow?? But anyone got a view on the best kit for $350-$650 range?

Keen for easy fit, minimal restriction and hopefully ok cooling capability.

Thanks

Don't buy a kit? Buy a intercooler new or 2nd hand, measure out with cheap pvc piping what you need, buy stainless bends/pieces to suit, mark it all up and get a shop to weld it? Or get a mobile welder to come and do it at your place, should be max 2 hrs work

Where do you live? If close to Gold Coast I'll weld it for you

Edited by Gcjosh

Hybrid, HDi cores aren't that good, IATs gwt pretty high on a 13s squirt on the dyno. I would invest in something a little better, I'm replacing my China Racing FMIC soon.

4B4EAC2A2BE3AFA6173B7963A9C955999BD9A8.j

You tried this bar and plates style Tao, this is the 600x300x100 china cooler you usually see on big power cars....the internal passage fins are all straight aswell,like your pwr not all bent up like the ones

you posted pics off which are absolutely shithouse. Be good to see if they are any better. Used on so many 10, 9, 8 sec rb30s.

cheers

darren

Edited by jet_r31

I'm making 289 on a Blitz return too but it wouldn't make more than 18psi at best - Tao reckons its the return flow but I'm yet to test. Will eventually get a Plazmaman kit or PWR

i was making 510rwhp fine with a 7yr old china cooler from ebay , still have it on car actually.

and what were your intake temps?

a core may allow you to make the power you make on a dyno because it's placed right in front of a massive blower but on the track or real world it's a different story.

havent used an intake temp sensor since day one haha.

car goes to powerplay twice a year, plus test n tunes , has been like this for over 5yrs so the intake temps must not be 2 bad :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...