Jump to content
SAU Community

Recommended Posts

The NZCAS worked nicely. Stock had fair bit of fluctuation up top.  

Lexxi32: This version is one size up. The 537rwkws version on the GTT.  I think its using about 30kws driving the front diff, it would be sitting around 450rwkws ish on 28psi. 

  • Like 1

Got my car tuned at the end of last year, I'm not sure if it's a good or bad result for so little boost.

Stock Rb25det w/ Z32 nistune, Hypergear Atr45sat, 1000cc injectors, blitz return-flow intercooler, splitfire coils, 255 Walbro pump directly wired, xforce 3" dump pipe & cat, apexi 3.5" exhaust, 3" metal intake to stock airbox.

Result was 230kw on 15psi dropping to 13psi.

20201026_095031.jpg.49fb4c69278637f4808bb7ca7fa9677e.jpg

Car was tuned with the 13psi wastegate spring.

Tuner couldn't figure the boost controller out proply and seemed hesitant to run the 18psi spring, he also reckons stock fuel lines are not really up to the task to run around 20psi.

And also noted the fuel pressure differential isolating, and suspected a fuel return issue from reg to tank, not sure if everyone gets this or I have an issue. 

20210225_125648.thumb.jpg.b3620cf354b4cdd97351b99fde7c0eb6.jpg

after x amount of time on the dyno I wasn't sticking around to play.

What do y'all think?

 

 

Edited by dyl33

Thats the usual amount of power seeing with supporting mods and boost given. Need a big FMIC, and possibly an exhaust cut out with a 20psi actuator to hold 20psi. and should see around 280rwkws mark. 

5 hours ago, dyl33 said:

Got my car tuned at the end of last year, I'm not sure if it's a good or bad result for so little boost.

Stock Rb25det w/ Z32 nistune, Hypergear Atr45sat, 1000cc injectors, blitz return-flow intercooler, splitfire coils, 255 Walbro pump directly wired, xforce 3" dump pipe & cat, apexi 3.5" exhaust, 3" metal intake to stock airbox.

Result was 230kw on 15psi dropping to 13psi.

20201026_095031.jpg.49fb4c69278637f4808bb7ca7fa9677e.jpg

Car was tuned with the 13psi wastegate spring.

Tuner couldn't figure the boost controller out proply and seemed hesitant to run the 18psi spring, he also reckons stock fuel lines are not really up to the task to run around 20psi.

And also noted the fuel pressure differential isolating, and suspected a fuel return issue from reg to tank, not sure if everyone gets this or I have an issue. 

20210225_125648.thumb.jpg.b3620cf354b4cdd97351b99fde7c0eb6.jpg

after x amount of time on the dyno I wasn't sticking around to play.

What do y'all think?

 

 

What do the 2 fuel pressure lines represent? Is that a  before and after ?

1 hour ago, hypergear said:

Thats the usual amount of power seeing with supporting mods and boost given. Need a big FMIC, and possibly an exhaust cut out with a 20psi actuator to hold 20psi. and should see around 280rwkws mark. 

Thanks for the reply @hyper-gear yeah I know the intercooler isn't desirable, but ive seen a guy up my way make 280kw with an r34 hiflow turbo on 18psi with the same blitz return intercooler only differance was a link ecu. So I'm thinking maybe I should put the 18psi actuator on and try again.

I'd like to avoid cutting a hole for a proper intercooler at the moment just to avoid any unwanted attention from the police, but it might be on the cards in the future.

Have you had any issues with stock fuel lines not being up to the task of running 20psi? because you run a lot of boost in your cars? Do you have stock fuel lines?

 

1 hour ago, Ben C34 said:

What do the 2 fuel pressure lines represent? Is that a  before and after ?

Im not to sure ben, I'm not that clued up on the ins and outs of fuel pressure and tuning.

He just said the fuel pressure differentials isolating and suspected a restriction between the reg and tank.

Was hoping it made some sense to you guys.

8 hours ago, Dose Pipe Sutututu said:

This won't make a difference in power.

Yeah it shouldn't, I reckon part of my result was due to him not being able to use the boost controller properly. 

Do you still run factory fuel lines in your car?

 

Seeing as nissansilvia is dead, thought I would ask here..

ATR28G2 or ATR28SS1.5 for a standard sr20? Has poncams, 740cc injectors, exhaust, intercooler, nistune etc, currently using a t28 at around 260hp. Looking for 300+hp, and as responsive as possible as its mostly a street car. Thanks!

5 hours ago, dyl33 said:

Do you still run factory fuel lines in your car?

 

Not anymore since installing a surge tank, but before running 1.7bar of boost, a single 450Lph Walbro, I was doing 372kW at the tread.

However in saying that, I did have fuel return issues. Even with the FPR fully wound out, I would still get 2 bar of fuel pressure. Back then I wasn't running a fuel pressure sensor so can't tell you if there were issues with fuel pulsation - which I suspect was probable due to weird lean spots in my fuel map.

Now I use both lines (OEM feed and return) as only a return and fuel is fed to the rail via a 8AN.

6 hours ago, sliderrr said:

Seeing as nissansilvia is dead, thought I would ask here..

ATR28G2 or ATR28SS1.5 for a standard sr20? Has poncams, 740cc injectors, exhaust, intercooler, nistune etc, currently using a t28 at around 260hp. Looking for 300+hp, and as responsive as possible as its mostly a street car. Thanks!

ATR28G2 with a BB upgrade in T2 .64 internally gated would be something nice to make up to 350rwhp with excellent response. 

On 22/02/2021 at 5:27 PM, hypergear said:

Thanks for the tip. Yes I though it might be the case, so I've added a cut out on the front pipe. Highly recommended for power hunting. 

spacer.png

spacer.png

 

What’s the theory behind this? Why not put a real exhaust on it that isn’t restrictive/Japanese junk and not the noise?

There is no reason why a 3.5-4 inch exhaust can be reasonably quiet provided that you get quality mufflers!

Complexity for no reason apart from not sorting the setup out properly from the beginning!

This shouldn’t be “the thing to do”!

why create noise and unnecessary attention to already “on the radar car’s”? SHUT THEM UP!

 

  • Like 3

I agree with the Pig. Build it the right size with quality muffs and there shouldn't be an issue. 

Something the pig didn't point out is the mess this shit leaves under your car. These things are starting to become quite valuable too so having it caked with exhaust soot and oily shit makes it a nightmare anytime you wanna work underneath the thing too.

This kinda thing devalues your car and is what draws the police's attention to our cars with this kinda rubbish and unnecessary noise. 

Testing the cut out the GTT made 17kws on 421rwkws with no other mods.  I've had cars with 3.5 and 4 inches exhaust, its a struggle for room under the car fitting the right mufflers. The cut out doesn't open till 20psi, Car now is stockish quite on cruise and doesn't restrict performance.    

  • 4 weeks later...

Some more time in prototyping, using the same set of housings but different wheel profile, I've managed to gain 250RPM RPM of better response while no lose in power, it is a pretty good out come consider no wheel size changes. I'll make custom housings next and see if that could improve response further. 

right1.jpg

enginebay.jpg

Red is Current ATR45SS-1 and Blue is prototype.

power.jpg

 

boost.jpg

 

  • Like 2
  • 1 month later...

Further development on the T4 printed turbo on Rb26. This prototype made a pretty big differences, peek 377awkws while making 20psi by 3500RPM and 220rwkws @ 4000RPM. Will doing few more things and hopefully seeing 420awkws+ without loosing response. 

carondyno2.jpg

 

power.jpg

boost.jpg

 

  • Like 4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...