Jump to content
SAU Community

Recommended Posts

Bit of Vid from Issac Gett Drift running one of our ATR45SS1 turbos in a RB2530det engine. Car made a responsive 430rwkws @ 20psi on E85 fuel. 

https://fb.watch/7HcHu9Y7T8/

 

149757889_2869780959938971_8941706211260098626_n.thumb.jpg.82b8dcd1d09c1745c7b0936b01ec7fcc.jpg

430rwkwsIssacget.jpg

  • Haha 1
  • 3 weeks later...

1000whp 300ZX is not something I come across every day. Powered by two of our ATR43SS-2 turbos externally gated on E85 fuel. Dyno maxed at 905rwhp @ 35psi

 

On 21/09/2021 at 9:41 PM, hypergear said:

1000whp 300ZX is not something I come across every day. Powered by two of our ATR43SS-2 turbos externally gated on E85 fuel. Dyno maxed at 905rwhp @ 35psi

 

Actually Tao, Prabaths 300ZX did 940rwhp on Trents dyno maxing out the torque at 1200nm. 

  • 3 weeks later...

I bought a 21u g3 used and it has minimal shaft play side to side , none front and back, and doesnt rub anywhere. previous owner said he ran at 19psi on rb20. do you think i should be concerned with the side to side shaft play or is it acceptable?

All turbos need to have a small movement in the shaft as the bearings relys on that clearance for rotation and oil delivery, you can that as bearing clearance. I say there should be nothing wrong with it since it came out of a fully working car. Assume its a bush bearing high flow, must make sure it runs an -4 oil line with no oil restrictors. 

  • Like 2
  • 3 weeks later...

Going back to the Super responsive ATR45SS turbocharger, now fitted to an stock Rb25det Neo motor. High mount externally gated setup on E85 fuel. Car made 390rwkws @ 26psi, 22psi @ 3500RPM.

rb25neo390rwkw.jpg

Edited by hypergear
  • Like 1
  • 2 weeks later...
On 31/10/2021 at 1:16 AM, hypergear said:

Going back to the Super responsive ATR45SS turbocharger, now fitted to an stock Rb25det Neo motor. High mount externally gated setup on E85 fuel. Car made 390rwkws @ 26psi, 22psi @ 3500RPM.

rb25neo390rwkw.jpg

Sexual turbo setup for a basic build, great stuff Tao!

  • Like 1
  • 3 months later...

Updating on SAU about the latest result of the R34 GTR test car:

Back today at chequeredtuning with Tomei Pon cam Type B installed. Pretty interesting result to share as I never though it would make so much differences on a Rb26 engine. Using the same turbo and nothing else changed, car ended up making 444awkws @ 23psi, compare to stock cams, it made 31kws with 3psi less boost with waymore mid top end torque. It wasn't much laggier in response either. 

Car has:
Stock R34 GTR Rb26 with APR head studs
HKS Cam gears 0 inlet, 0 exhaust.
Tomei 260 / 9.15 Pon cams
R35 GTR coil packs
Trigger kit
ID 1650cc injectors
Twin 540 Walbro pumps+11m fuel line
Apexi FMIC
Trust 3 inches turbo back exhaust
PS2000
Nismo Front mount cooler
T4 high mount exhaust manifold
HyperGear 50mm External gate
HyperGear ATR45SS-1 Rb26 T4 Vband rear turbocharger
Final result of 444awkws @ 23psi
 

cardyno.thumb.jpg.7a68033d14f85e5bed3d77563cd37d3b.jpg

engine.thumb.jpg.59977212fb22c98f919ac10637730f54.jpg

powerlabled.thumb.jpg.07f6d6e09ae2943ac4a9a34f7a4c7904.jpg

boostvslabled.thumb.jpg.c96a3814d84581ec407a49eb9c6c090c.jpg

cams260915.thumb.jpg.872002c842552d95905bc53a86d456ca.jpg

  • 4 weeks later...
  • 5 weeks later...

One more result to update. This is from a new version of ATR43SS-3 turbo. Car's an R33 GTST with a built Rb25det Neo motor with stock cams. Car managed to pull 466rwkws at @ 23psi, full boost by 4k, 520L fuel pump maxed. 

Details of build:
#KeepitReet Nissan R33 GTST Drift car
Forge bult Rb25det Neo engine
Nitto Pistons and Con-rods
HyperGear ATR43-SS3 Pro Externally gated turbocharger
6 boost manifold and twin Turbo smart 50mm gates
ID 1650cc injectors + Walbro 520 Fuel pump 
Forward facing plenum 
Front mount PWR intercooler kit 
Fuel system maxed at 465rwkws @ 23psi, E85 fuel. 

car.jpg

 

456rwkw.jpg

Edited by hypergear

Another result to share. This is from one of our rebuilt and high flowed Precision 6262 turbo. Making 626rwkws on a R33 GTR.

Built 2.9L
Hypertune intake
6boost exhaust manifold
4" dump/front
Pwr intercooler
Bosch 1650cc injectors
Twin walbro 460 pumps
Plug and play link g4x
Prp coil kit
Prp trigger kit
drop in cams and valve springs

front.jpg

enginebay3.jpg

enginebay2.jpg

626rwkw.jpg

  • 4 weeks later...
On 26/04/2022 at 9:32 PM, hypergear said:

One more result to update. This is from a new version of ATR43SS-3 turbo. Car's an R33 GTST with a built Rb25det Neo motor with stock cams. Car managed to pull 466rwkws at @ 23psi, full boost by 4k, 520L fuel pump maxed. 

Details of build:
#KeepitReet Nissan R33 GTST Drift car
Forge bult Rb25det Neo engine
Nitto Pistons and Con-rods
HyperGear ATR43-SS3 Pro Externally gated turbocharger
6 boost manifold and twin Turbo smart 50mm gates
ID 1650cc injectors + Walbro 520 Fuel pump 
Forward facing plenum 
Front mount PWR intercooler kit 
Fuel system maxed at 465rwkws @ 23psi, E85 fuel. 

car.jpg

 

456rwkw.jpg

Twicked this turbo alittle bit, Made same power, picked up another 500RPM of response and 100kws in mid range at same boost level or 23psi, still running out fuel even with an extra pump.  I think the original version of SS3Pro would peek 70kws more at full capacity.

450rwkw.jpg

  • Like 2
On 31/05/2022 at 1:53 AM, hypergear said:

Twicked this turbo alittle bit, Made same power, picked up another 500RPM of response and 100kws in mid range at same boost level or 23psi, still running out fuel even with an extra pump.  I think the original version of SS3Pro would peek 70kws more at full capacity.

450rwkw.jpg

Very spicy, what dreams are made of. All in by ~4000rpm and making those numbers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...