Jump to content
SAU Community

Recommended Posts

I tow with my D40 Navara 2.5td manual, it rocks, fuel consumption is heaps good on highway runs, normal non towing I get 10L/100ks and when towing I can get 14L/100 maybe more if its alot of around town towing...

comfortable and drives good and handles 4WDing prett well just needs a lift kit if your into 4wd heaps...

stx or st model for all the interior electrics...

you can buy mine off me for $20K, I want to get a brand new one...

Lmfao :)..... yeah don't listen to me, but I maintain a 3.0l pootrol is appalling, and yes I've driven them. A td pajero would in fact wipe the floor with one.

Not sure why you'd want such a truck (pootrol) for a mere 2500kg?

Bang on Marlin. I am on my 7th patrol and boy am i glad I avoided the shitbox 4 cylinder. Biggest mistake nissan ever made.

Fwiw Mark my current patrol is the 4.8 petrol variant. Paid plenty for it when I first bought it but you can pick them up for dirt these days. Initially I couldnt live with the fuel economy. It was shit but some minor mods saw a marked improvement. A good header system with a 2 & 1/4 inch exhaust , and a dyno tune with an after market ecu saw not ony a huge improvement in fuel useage but a nice gain in grunt to boot. Mine is the TI variant so it has all the frilly bits to make it a civilised place to spend your time. Seats are marginal but other than that it has all the fruit.

As my work vehicle it works its arse off most days towing my tradey trailer and some heavy loads and when it isnt working it gets its arse thrashed off. Nothing slows it down to any degree including a heavy arsed hire trailer with the skyline on board and economy doesnt vary by as much as I thought it would between towing and non towing.

The tiptronic box has never complained in 5 hard years and like all my patrols before this one all you can spend on it is the usual service items and a brake pad change at around 80 k intervals.

Highly reccomended.

  • Nope 1

very hard to find the 4.2 TD's out there!

am looking at a 99 GU 4.5L Petrol Pootrol Ti with extremely low km's offered to me by the dealer who sold me the R35. Damn thing is like new inside and out. tempted...

Can't legally tow 2500.

Capable, yes. Legal? No. :(

my truck can legally tow 2.5T, as long as its braked, it says it on the tow bar and on the inside of the door.... i dont no what you are talking about.....

and yeap they are super hard to find in a 42tdi, it took me ages to find my one, i traveled to get it and payed the price for it, but in the end i got the best truck i could buy and i love it, takes the load for work, gose well, dosent drink fuel like my old Navara (4L v6), and tows the GTR like a dream. plus i got the ST model so its got all the electrics inside plus the carpet and sounds deader, and most of all Coil springs all round!!! not many utes that run that!! and if your worried about taking weight you just pump up the air bags with the on board compressor

: D

oh yea, and the 3L patrol.... = fail hense why people go here http://www.brunswickdiesels.com.au/new/stories.php

6.5L Chevy!!!!! you can get the NA version or you can get the TD version..... i kinda wish i brought the 3L and got the conversion.... woulda came in at the same price basicly

If or closer to 10 than 20 grab it up Handbrake.

I sold a '98 ST 4500 petrol manual done under 100k for 14k in 2005 so a similar Ti couldn't be worth any more now surely?

Still a lot of truck , If you need that much truck.

The 99 Ti GU has 14,300km on it. Japanese businessman owned it. locked in his gold coast 'mansion' - only drove to church once a year sort of thing with no off road use. apparently even smells new. the dealer selling it sold it to him originally.

will check it out. They are a major nissan dealer (nissan HPC) so their vouching for the Km's being genuine must mean something. I guess I will know when I see it.

do I need that much truck? Thinking of towing the 2.5 tonne worth of GTR and extras around 12-20 times a year and maybe some interstate trips. might even take it off road too. I don't know what would scare the sh#t out of my wife more. a track session in the R35 or an off road session in a 4WD.

gallery_56949_4119_12070.jpg

Ummmmm, was replying to the Crewman suggestion champ ;)

Yer they can Ben, they use the one tonner diff and the larger trans cooler from factory that is why I purchased it. It is only for the auto though the manuals can only tow 1600kg???

You guys know this, but at 2500kg GTM (gross trailer mass), you need to have 4 wheel braking on the trailer, and a separate breakaway braking system. I don't know of any hire trailers that have these features, as they are all rated to 2 tonne GTM.

Without this, you're towing illegally regardless of what your towing vehicle is rated to tow.

Just sayin'

and yeap they are super hard to find in a 42tdi, it took me ages to find my one, i traveled to get it and payed the price for it, but in the end i got the best truck i could buy and i love it, takes the load for work, gose well, dosent drink fuel like my old Navara (4L v6), and tows the GTR like a dream. plus i got the ST model so its got all the electrics inside plus the carpet and sounds deader, and most of all Coil springs all round!!! not many utes that run that!! and if your worried about taking weight you just pump up the air bags with the on board compressor

: D

in the utes? all the cab-chassis are 4.2 until 2007/8 when they no longer met emissions and got the 3.0. And they were all tdi from 2002. Its the wagons that are hard to find in 4.2 and cost twice what they're worth. I've seen 2yo seconhand ones with 100,000km on them for more than a brand new 3.0! piss off.

If you don't want the 3.0 (which don't fail anymore than Pajero DiDs, for example) then the petrol on gas is the go. 4.2 GU Wagons are a complete rip off and the slowest lump of a 4WD you can buy. You'd be far better off buying a 100 series 4.2 turbo Landcruiser.

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...