Jump to content
SAU Community

Recommended Posts

So here we are at the 2016 Australian Hillclimb Championships at Haunted Hills. I have to say I have never ever been to such a high quality facility in my life. This place is incredible. I'll post up some pics tomorrow.

We did lots of testing today (Thursday), on my old tyres and I think I have a handle on this very technical track. I'm running nitrogen in both sets of tyres now and quite frankly I see no advantage over normal everyday air, The temps creep up as usual and I'm continuely having to bleed air out to stay at 34 degrees hot. Cheryl is being her normal self, which is great, 1 less thing I have to worry about.

 

Here's a vid of Cheryl and I on a practice run... Vids just don't do credit for the height changes unfortunately. 

 

  • Like 3
  • 2 weeks later...

Here ya go Dale,,,this one was my faster run of the weekend. I was getting very frustrated at my lack of quality times and shit traction, being in the bottom 3rd was not where we should be, So I sat down in a quiet place and starting looking at all my vids and car setup. The Hankook supplier told me I should be aiming for 34 hot, of which I was achieving. So I decided to try something different and lowered the rears to 28 cold. Instant improvement, I went from high 61s to mid 59s and as you can see I lost tons on the last corner.

 

20161026_160736.jpg

This is the tyre warming area as you can see and the start line is where the 2 blokes are standing.

 

20161026_160742.jpg

This one on the way down, the world as we know it drops rapidly.

Some more pics of this awesome place.

20161026_160746.jpg

And it just goes down and down. The locals call the lowest corner at the bottom "OH SHIT CORNER" and I understand why. In my vids check out the skid marks. I was told a local wrote off an R34 GTR there some time ago and then smashed his FD RX7 on the Friday practice of the event. Now that would suck balls. Sorry Pete no pics. I felt sorry for the poor bastard.

 

20161026_160750.jpg

Time to start actually climbing.

 

20161026_160755.jpg

The back straight,,, Yah I get to use 3rd gear. The braking zone was interesting, from the pit area we all comment that we are braking to early, I got to the 2nd red stripe and was locking the inside front, no way could I pull Cheryl up any later.

 

20161026_160759.jpg20161026_160804.jpg

The 2 back corners,,,very technical.20161026_161239.jpg

The control tower, my god it rivals anything I have ever seen.20161029_090453.jpg

4 NSW Cars in our pit bays,,, and all on the podium. The other 3 bastards won their classes and broke class records, I had to settle for 1st looser.

 

 

 

9 hours ago, bcozican said:

so bloody awesome !   looks fun good driving too

Thanks buddy,,,we had a great time. The Patrol towed perfectly as usual. The only incident was a dive bombing Kookaburra that hit the passenger side of the windscreen and bent the aerial mast.

 

Cheers

Neil.

 

7 hours ago, Dale FZ1 said:

That facility looks great!!

Presuming if it's hillclimb then sub 1.6km length.

What sort of max length in the straighter sections?

Mate I gotta tell ya they have their shit sorted. That control tower has it's own kitchen, the auditorium section has polished floor boards, 1/2 covered full length balcony, enough chairs and tables for over a hundred peeps and the toilets and showers were top end hotel quality.

There's 8 different versions of the track they can use and I think we were on the 1.1km clockwise one. 

Cause I'm such a lovely bloke I got an in car tour of the track on Thursday with the track designer/club president. that was very cool.

Cheers

Neil.

 

 

 

You funny buggers, that cheque is my 2nd. No shouts Mr Handley,,, Cheque shall be framed, like the $135 from Brisbane.

As if I haven't had enough for the year,,, I'm just about to enter Wollongong's last Multiclub hillclimb for the year.

http://wscc.org.au/download.shtml

Get off ya arses and keyboards and come for a play. No you cannot double enter Cheryl,,, she's not that kind of girl.

 

Cheers

Neil.

 

Cool bananas buddy, might have to put you to work though,,, not really, Cheryl will perform.

Wonder if Mr all talking, keyboard racing Fatz will enter. I bet not a chance, probably because they use timing and we all know he is frightened of timing. Bum wouldn't even have a cams licence.

Cheers

Neil.

 

 

 

52 minutes ago, Neil said:

Cool bananas buddy, might have to put you to work though,,, not really, Cheryl will perform.

Wonder if Mr all talking, keyboard racing Fatz will enter. I bet not a chance, probably because they use timing and we all know he is frightened of timing. Bum wouldn't even have a cams licence.

Cheers

Neil.

 

 

 

Not a chance he'll come down to play... He'll be too scared of all the people watching on as the clock ticks by... :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...