Jump to content
SAU Community

Recommended Posts

Nice rims too Ben...

I replaced the radiator hoses today, blue silicons to match the cooler piping.

Also ripped the rear disks off to get machined. Found a seized caliper so I ended up having to remove and repair it also. I fitted the QFM pads and bled the system with no other issues. My brakes should be sorted now.

post-63525-1275036985_thumb.jpg

please dont cut em up chuckie....if you don't want them or want something different I'll get a pair of the UAS ones to swap for yours....we can only run the factory ones in production car racing and I've never seen another set

please dont cut em up chuckie....if you don't want them or want something different I'll get a pair of the UAS ones to swap for yours....we can only run the factory ones in production car racing and I've never seen another set

Duncan Don`t PANICK ,I would not do that DUDE REALLY :blink: ,Backing PLATE`S i would like to messs with,only small inlet to ROTOR`S :down: ,so it`s either make only PLAY :bunny: ,look at what i can do with stock backing plate`s,

But I think they make a DIFFERENCE to BRAKING :( Or may be me not driven Bus for while :) ,

But Nice to get her BACK ON ROAD :):) few more small bit`s to sort out ,

JUST happy to have finished main stuff & look at other stuff i need to finish off,

Cheer`s Chuckie.

Finally fitted the last bits of body back to the car... Washer jets, fabric thing under the bonnet and the end caps for the side skirts which are all sikaflexed up and taped on to set... It's amazing how two small things make the car looked "finished"... Oh and installed the hdi d spec boost contoller and boost gauge last night, low boost tuned to 10psi. Will set a high boost after I get a new dump and front pipe. Also looks like I'm picking up my rb30 short motor next week :D

tried to fit the splash guards to no evail... Had both the ones that came off the old car and my s2 ones... Might try some r34 ones and see how I go...

Today my stag got some luuuurve

New oil

Oil Filter

Spark plugs

Injector clean treatment

Tyre rotation

Top up of all fluids

Fixed instrument panel bug I had

Some time this week will change the 3 ancillary belts.

Also discovered my lowerball mount boots are torn and the random leak/weeping from around the back of the transfer case is still around. Will get photos of the leak area... anyone have any experience with these lowerball joints?

This is what 50,000k old Champion gold series plugs look like. Replaced them with NGK coppers will change them more often...

post-40162-1275134365_thumb.jpg

Today when i was at work i put the stag on a pit and removed the front driveshaft, :)

I plugged the hole that the shaft came out of with a small plastic plug.

Then i pulled the 4wd fuse and took it for a spin in the wet :D

Car feels really good in rwd, pretty happy. Glad mine came with an LSD too. I might leave it in rwd for a while.

I noticed a lack of stagea youtube vids, might have to make some vids to put up soon :)

Today when i was at work i put the stag on a pit and removed the front driveshaft, :)

I plugged the hole that the shaft came out of with a small plastic plug.

Then i pulled the 4wd fuse and took it for a spin in the wet :D

Car feels really good in rwd, pretty happy. Glad mine came with an LSD too. I might leave it in rwd for a while.

I noticed a lack of stagea youtube vids, might have to make some vids to put up soon :)

aren't you supposed to let the pressure out of the attesa system as well, i though the clutches for the front shaft were preloaded with pressure?

aren't you supposed to let the pressure out of the attesa system as well, i though the clutches for the front shaft were preloaded with pressure?

Nope pulling the front drive shaft is all that needs to be done....

Today i tested out the lsd :)

Then i put my first stag vid up on youtube.

http://www.youtube.com/user/robnuts01

Take your burnouts and piss of mate.... Just what we need posted on SAU. Videos of you doing burnouts on public roads/car parks in Australia in stageas, a car that TENDED to fly under the radar due to MINIMAL cock head ownership

Take your burnouts and piss of mate.... Just what we need posted on SAU. Videos of you doing burnouts on public roads/car parks in Australia in stageas, a car that TENDED to fly under the radar due to MINIMAL cock head ownership

+1

Today i tested out the lsd :)

Then i put my first stag vid up on youtube.

http://www.youtube.com/user/robnuts01

Glad I'm not the only one that thinks your a FOOL!!!

Take you shit else ware!

:D enough said Arse clown!!!!

Edited by Jetwreck
OK well sorry I offended anyone, if i could delete my post i would,

I won't be posting anything like that anymore.

Ask one of the moderators to delete it....I am sure they will anyway.....no offence taken.....just was not the smartest of moves knowing that this forum is not only viewed buy its members but more than likely buy the Police and Media.....you just put a f$#king bit target on your back!!!!

Ask one of the moderators to delete it....I am sure they will anyway.....no offence taken.....just was not the smartest of moves knowing that this forum is not only viewed buy its members but more than likely buy the Police and Media.....you just put a f$#king bit target on your back!!!!

No worries, that's why I blocked my plates. I Really didn't think I would get flamed so hard. Ah well won't make that mistake again.

Peace.

Don't worry about the plates... It's the fact a stagea is very incognito champ... Oh and bright yellow, I'm sure others who have a yellow s2 don't want local cops pulling them over asking about burnout and the such

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...