Jump to content
SAU Community

Recommended Posts

The reason being I do not wana leave my car at any shop for more than a day ( I know it can be done in a day by a gun fabricator/mech/welder) and as you said above, the cost implications, but it shouldn't be expensive for some bits of welding and fiddling around... As for selling my jjr dump for $200, I bought it for $179 brand new lol......... And no defects mate, I'm not into screamers, plumb back's for me.

I meant to say its NOT going to cost a bucket load, wasn't concentrating.

You're going to find out the hard way that modifying your car is a process that takes time. You swap out injectors, afm, turbo and get it tuned; you're going to be without your car for more than a day. You can't do without your car then you can't modify it, you need to sort something out anway.

As for defects etc. an aftermarket internally gated turbo is just as illegal as an externally gated one. Just do it properly.

having a stupid looking car and driving it like a stupid then being stupid when you are confronted by popo will probably get you defected just for being stupid,

before an external gate will get you defected for having an external gate...

having a stupid looking car and driving it like a stupid then being stupid when you are confronted by popo will probably get you defected just for being stupid,

before an external gate will get you defected for having an external gate...

Lol at ARTZ, that little blue three wheeler on your avatar will surely get you defected mate. For 'driving an extraordinary and potentially dangerous car on public roads'..

Kando's turbos are great. My girlfriends sister has been running a td05-20g on her sr for a year with no dramas and cops a flogging more then often and my mate has had a kando td06 on his rb20 for nearly 6 months now pushing 27 psi on track days and smashes the fkuc out of it and no signs of smoke,shaft play or anything else yet,very happy with a 800$ delivered to door turbo.

Kando's turbos are great. My girlfriends sister has been running a td05-20g on her sr for a year with no dramas and cops a flogging more then often and my mate has had a kando td06 on his rb20 for nearly 6 months now pushing 27 psi on track days and smashes the fkuc out of it and no signs of smoke,shaft play or anything else yet,very happy with a 800$ delivered to door turbo.

awesome, can u tell me what rpm range the TD05 starts spooling on the SR. I just bought a TD05H 18G for $600 shipped. If u pay outside ebay he will knock about $100 off it.

Kando's turbos are great. My girlfriends sister has been running a td05-20g on her sr for a year with no dramas and cops a flogging more then often and my mate has had a kando td06 on his rb20 for nearly 6 months now pushing 27 psi on track days and smashes the fkuc out of it and no signs of smoke,shaft play or anything else yet,very happy with a 800$ delivered to door turbo.

What sort of power are they both making?

Kando's turbos are great. My girlfriends sister has been running a td05-20g on her sr for a year with no dramas and cops a flogging more then often and my mate has had a kando td06 on his rb20 for nearly 6 months now pushing 27 psi on track days and smashes the fkuc out of it and no signs of smoke,shaft play or anything else yet,very happy with a 800$ delivered to door turbo.

27 psi that's a bit drastic did you mean 17 psi? Mine didn't make any more power after 22 pound I'm fairly sure Roy found that to.

1.9ish bar of boost?

Pretty sure these (TD05,06, T67 and their like) wouldn't be able to flow more than 1.7bar (which is what trust quote for similar frame misti's, I would assume that the Kando are much the same). They seem to run out of their efficiency at around 1.5ish IIRC.

Edited by Wheezy

I just read through this whole thread, very interesting read and long lol.

has anybody actually had a td06sl2 20g(external gate) tuned running yet?

also I know a 8cm rear housing is a little small for a rb25 but has anybody out there tried one? Im considering it as I already have a trust td06 kit which needs a rebuild and its a 14cm rear lol, so I want to get a 10cm but Kando/kinugawa dosent have them in 3 bolt flanges. So am considering getting a TD06sl2 20g and running it with a 8cm untill I can find a 10cm turbine housing to swap onto it........ thoughts???? Note im also waiting on a reply to a email if they can get me a 10cm 3 bolt but its the second email and so far no luck

Unless somebody out there has a 10cm and wants a 8cm or a 14cm I could buy the same turbo and swap housings I guess

That won't fix my problem, I have a trust exhaust manifold so I need the mitsu housing ( same as Roy ) unless I change the flange on the manifold, which I don't want to do

Edited by JLTS13

That won't fix my problem, I have a trust exhaust manifold so I need the mitsu housing ( same as Roy ) unless I change the flange on the manifold, which I don't want to do

Sounds fine. You will be able to get a 12cm item which should work nice. A little laggier but hey... Cant have everything lol.

If search TD06 triangle housing, you will find the Kando listings for the item. Sometimes they have Kinugawa in the description also.

If you need help determining which housing to get its simple, measure the outer diameter of your turbine wheel. 61mm SL2, 65mm Standard TD06, 67mm TD06H.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...