Jump to content
SAU Community

Recommended Posts

A thought just popped into my head...

makes me laugh a little

3 years ago anyone conpemplating a MHI/Trust turbo wouldve have been hunted down and shot and told that a GT30 or GT-RS is the only way to go for an RB25.....now we have people droooling over a cheap EBAY copy of an MHI turbo

A thought just popped into my head...

makes me laugh a little

3 years ago anyone conpemplating a MHI/Trust turbo wouldve have been hunted down and shot and told that a GT30 or GT-RS is the only way to go for an RB25.....now we have people droooling over a cheap EBAY copy of an MHI turbo

yeah, these kando turbos totally makes me jizz my pants.

cheers Scott, wouldn't hurt to try the anti surge cover anyway, + if VCT can be fixed then even more response/torque, yay

TBH if i had seen the results in this thread then i wouldn't have gone down the Garrett path... Its been a long expensive road and is still YET to be tuned... I guess its why i read this thread all the time to see what others are coming up with and also so i can kick my own ass for not researching harder :P

But on that note, the spool sound of a 3037-56T is pretty awesome!

Haters Gonna Hate :laugh:

A thought just popped into my head...

makes me laugh a little

3 years ago anyone conpemplating a MHI/Trust turbo wouldve have been hunted down and shot and told that a GT30 or GT-RS is the only way to go for an RB25.....now we have people droooling over a cheap EBAY copy of an MHI turbo

It was a cost thing.

The results that were around indicated they were good things but the premium paid for trust gear was unpalatable when you could get a new gen Garrett for half the price.

That and majority rules when you're dealing with sheeple :P

3 years ago anyone conpemplating a MHI/Trust turbo wouldve have been hunted down and shot and told that a GT30 or GT-RS is the only way to go for an RB25.....now we have people droooling over a cheap EBAY copy of an MHI turbo

There were a few who always knew MHI turbos were fine, but there is a group mentality which I suppose is always going to happen on forums which is whats going on here. The fact that the MHI turbos are becoming trendy shows how behind the times this place is, if they (/Kando) are being considered as class setting for any reason other than value for money.

I've been LONG a fan of the MHI turbos where the application suits, we specced and used a TD05-16G off an EVO on an RB20DET in 2005 over peoples recommendations for various Garrett/HKS units and it turned out really really well.

When I was looking into turbos Trust were the only options I saw viable to me for a Mitsi based turbo, and it would have been a 20G if I did it - iirc there was no internal gate option so it would have been a turbo kit north of $5000 at the time which just wasn't going to happen.

Anyone who has got a GT3076R shouldn't regret not getting a TD06-20G or 25G imho - I still view it as a better balance, though there is a shrinking gain vs money spent... particularly now Kando are doing these things. They have certainly made awesome performance very affordable!

When you factor in EG cost and custom pipewrok, it really isn't any cheaper than a bolton IG garret.. is it any faster I'm not sure yet..

I just did it for something a bit different ..

Matt the spool sound on my SL2 is sexy and seductive, wish I had a billet wheel though. :)

But with the EG it'd still have the advantage of better boost control over the IG Garrett? So worthwhile....

Did it for Teh Lulz?

I cant wait to hear the difference... I looked at the GTX with billet wheel but couldn't justify the extra $$$

Well, all my guns are loaded for a Sandown at the end of April so have a little over 3 weeks to get the car back from Sydney, new tyres, new 73HTA turbo installed and tune on E85. Wont have time to make my exhaust so will have to hope the EPA are nice to me and I dont get pinged for noise again :( Real keen to see if the billet wheel makes much of a difference. From there the next step will be whether the Kando billet is much chop :whistling:

When you factor in EG cost and custom pipewrok, it really isn't any cheaper than a bolton IG garret.. is it any faster I'm not sure yet..

Not true man.

You should have a 20G fitted and fabbed for the cost of an IW garrett on its own (Turbo itself with IW housing and actuator).

Im pretty sure they go for over $1000 without the rear housing and the genuine garrett housing is over $500 without the actuator which is another $120 atleast. And forgive me if I am wrong but a Garrett CHRA is in the vicinity of $1300. Call it $1800 to be fair and you still dont have a dump pipe, intake pipe or lines.

Kando is $700, EWG $400, say $600 to attach the gate and make a dump pipe, say $300 for an intake pipe and some silicon/odds and ends. Totals $2k and its actually on and running, waiting for a tune.

A thought just popped into my head...

makes me laugh a little

3 years ago anyone conpemplating a MHI/Trust turbo wouldve have been hunted down and shot and told that a GT30 or GT-RS is the only way to go for an RB25.....now we have people droooling over a cheap EBAY copy of an MHI turbo

And 3 years ago highflows were the poor man's alternative to a good turbo lol!!!

Not true man.

You should have a 20G fitted and fabbed for the cost of an IW garrett on its own (Turbo itself with IW housing and actuator).

Im pretty sure they go for over $1000 without the rear housing and the genuine garrett housing is over $500 without the actuator which is another $120 atleast. And forgive me if I am wrong but a Garrett CHRA is in the vicinity of $1300. Call it $1800 to be fair and you still dont have a dump pipe, intake pipe or lines.

Kando is $700, EWG $400, say $600 to attach the gate and make a dump pipe, say $300 for an intake pipe and some silicon/odds and ends. Totals $2k and its actually on and running, waiting for a tune.

Exactly 2k...its not alot cheaper in the end unless you can weld up all your pipes then it is...

Not true man.

You should have a 20G fitted and fabbed for the cost of an IW garrett on its own (Turbo itself with IW housing and actuator).

Im pretty sure they go for over $1000 without the rear housing and the genuine garrett housing is over $500 without the actuator which is another $120 atleast. And forgive me if I am wrong but a Garrett CHRA is in the vicinity of $1300. Call it $1800 to be fair and you still dont have a dump pipe, intake pipe or lines.

Kando is $700, EWG $400, say $600 to attach the gate and make a dump pipe, say $300 for an intake pipe and some silicon/odds and ends. Totals $2k and its actually on and running, waiting for a tune.

Garret GT3076R in the US (no actuator, lines etc) - around 1100-1400, depending where u shop.. Plus an actuator, say 100, lines maybe 100, and u easily have a superior? product the cost of or cheaper than a HG. Better resale value too.

http://www.ebay.com/itm/Brand-New-REAL-GARRETT-GT3076R-Turbo-/180856806023?hash=item2a1be7da87&vxp=mtr

http://www.ebay.com/itm/Garrett-GT3076R-GT30R-GT3037-Turbo-Ball-bearing-550HP-/370230703396?pt=Motors_Car_Truck_Parts_Accessories&hash=item5633783524&vxp=mtr

Were you gonna swim there and swim back with it yourself or are they cutting you a special deal on postage? How bout that standard dump pipe too...

That does sound easy...why haven't you done it already?!

Garret GT3076R in the US (no actuator, lines etc) - around 1100-1400, depending where u shop.. Plus an actuator, say 100, lines maybe 100, and u easily have a superior? product the cost of or cheaper than a HG. Better resale value too.

http://www.ebay.com/itm/Brand-New-REAL-GARRETT-GT3076R-Turbo-/180856806023?hash=item2a1be7da87&vxp=mtr

http://www.ebay.com/itm/Garrett-GT3076R-GT30R-GT3037-Turbo-Ball-bearing-550HP-/370230703396?pt=Motors_Car_Truck_Parts_Accessories&hash=item5633783524&vxp=mtr

They are external gated turbos... You have no idea what you are on about!

Plus more like $500 for lines

Exactly 2k...its not alot cheaper in the end unless you can weld up all your pipes then it is...

Mate.... Its 2k for a Kando fully set up, its 1800 for a garret with no dumps/lines/pipes ETC.

In fact its over 2k for a 3076R with an IWG and goodluck making a 5 bolt dump for the same price as your V band job when the kando COMES WITH the bloody V band ring.

Garret GT3076R in the US (no actuator, lines etc) - around 1100-1400, depending where u shop.. Plus an actuator, say 100, lines maybe 100, and u easily have a superior? product the cost of or cheaper than a HG. Better resale value too.

http://www.ebay.com/...be7da87&vxp=mtr

http://www.ebay.com/...3783524&vxp=mtr

Dude thats $1200 for an external gate version, so simply add $500 to the kando equation (700+500=1200)... Meaning all things equal the 3076R costs another $500 on top.

Check what I said above about the IWG version, it is even more expensive again.

EDIT: plus the lines like Simon said. BUT Kando do the lines for about 150 from memory. (LOL Kando lines on a Garrett turbo)

Ron by the time you pay for shipping a wastegate and all the other crap needed to make that work..it will probably be twice the price of hyperGears best..not to mention the stuff around should you need to claim warranty..

we not comparing HG to garret here anyway that's another conversation all together , this one is about kandos. :thumbsup:

Once we have closure on final results for the 20G I am going to approach a few members and do a 'bang for buck as at 2012' thread and try get it stickied.

That way we can clearly see the outcome of all the available options and a rough price guide for people to follow. I think its necessary.

so i was looking up different ways to mount an ext gate and across this method.. how interesting for those who used to run IWG versions but dont want to block it off simply take out the flap and do this.. oh and before you say anything this is working on a 500hp Volvo S60R

88ce897d4cbe81b5-large.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Take a couple of the big ones back to "work", leave them in the big bin.   Will make a good boom when the garbage truck emptys it out... I've heard from another source about the boom when they had put I believe it was a 4cylinder engine in the big bins at Richmond base...
    • That idea has crossed my mind, I do a 5km walk everyday, this does take me past some bushland......I think you may be onto something 😉  That, plus 1 rock on every bin night might do the trick, it may take a year, but it could save me a couple of grand The only issue is the big 'Boonies", I have a few that weigh around 30-40kg, maybe they should be the first to go into the raised garden bed,  and then let the next owner deal with them....my daughter gets the joint when I kick the bucket, mums the word mate......LOL Noice......
    • Wow. Did you call the car a Nissan Skyline?
    • You're retired Mark, on bin night, go for a walk, kind of like you're doing the beep test. Put one rock in the first neighbours, come back, get another rock, go to the second neighbours, repeat over many weeks. All rocks eventually gone...
    • No chop chop of anything mate, it is what it is, plus, I don't want any air that isn't either going through the cooling stack or intake getting into the engine compartment increasing under bonnet pressure  Yeah, the Mazda Speed aftermarket intake above is less than ideal for multiple reasons, the requirement to remove the bumper every time you need to service the filter, and also smaller in diameter than the NC1 OEM one Weirdly, Mazda Speed is part of the Mazda motorsport division, "form over function" and $$$$$ for Mazda from unsuspecting punters I suspect  After some googling about them it seems they added no power, but do increase some induction noise Meh In other news, the electricians have been busy today at the house, and are back tomorrow finishing up all the security stuff and exterior lighting, they also added some lighting on the garage ceiling, which will come in handy when working in the garage when it's not freezing out there My Birdies raised garden bed also arrived today as well, which I'll put together and place tomorrow, it's a big tall Bessie, 74cm high, 92cm wide and 214cm long, this will come in handy as I am starting to get "stockpiles" of good soils from doing landscaping, some of the clean rock, namely the river stone, will go into the bottom of the bed for drainage, as well as the old Apricot tree that was out the back,  and when it's full, I'll grab another one, I will be growing enough veggies to keep me both busy as well as supplementing the shopping list I'm also awaiting another quote for a new Colourbond front fence, as the "1980 style cemented in rock edging" that was there and "fashionable at the time" looked arse, and my god, the amount of cement used to fix the rock was insane, it took 1.5 days for me to break out 12 meters of the stuff by hand, trim the bushes back to the fence line and dump it out the back of the joint to deal with at a later date,I will soon need a skip bin to tip it all Unfortunately they did alot of the cemented in rock around the joint, which I hate, so a few pallets of retaining wall blocks for around the front and back where the cemented in rock is will be required to bring it up to a standard, and look, that I will be happy with 12 meters worth of rock and cement Finished smashing the fence line and ready for a fence to be installed, yes, the lawns need some TLC and thickness, the previous owner trimmed the grass to the roots 😢, the TLC I can provide, and nature over time will do the rest And there's probably about another 40 meters worth of this landscaping abomination left to do around the front and back gardens, I'm guessing maybe 3 or 4 tons worth, tip fees for this will be a killer Meh, all in all I'm having fun and keeping busy, plus, it's good PT
×
×
  • Create New...