Jump to content
SAU Community

Recommended Posts

Recieved a box today containing my R33 calipers!

Got all the lines, shims and clips, and as a bonus what appear to be a virtually brand new set of brake pads :thumbsup:

Now for some offset brackets & bigger rotors.

There not r33 gtr brembo's are they?

There not r33 gtr brembo's are they?

No mate, sadly my finances don't run to Brembo's unfortunately, but I think the R33GTSt calipers teamed with this;

http://www.conceptzp...40203.166.28.81

I should have more than enough brake power.:thumbsup:

No mate, sadly my finances don't run to Brembo's unfortunately, but I think the R33GTSt calipers teamed with this;

http://www.conceptzp...40203.166.28.81

I should have more than enough brake power.:thumbsup:

agreed, the brembos are about 10% more braking at 100% more cost. no worth it. 32 gtr/33 gtst are excellent for the price

No mate, sadly my finances don't run to Brembo's unfortunately, but I think the R33GTSt calipers teamed with this;

http://www.conceptzp...40203.166.28.81

I should have more than enough brake power.:thumbsup:

Interested to hear how you get on with these brackets. I have tried several on my C34 without being able to fit them (very different from Skylines) although I see you have an M35 - lets hope they are the same as 350Z.

well this weekends pretty big for me now..

changed the spark plugs, to find that when i bought the car they had put iridiums in already :D SSV did a good compliance!

phenolic runner spacer.

suction pipe thats scotts making up.

then injectors are going in, and Cihan the tuner is coming around on monday to install my emanage, and dump the stock tune on it with bigger injectors..

just untill another couple of weeks before i can tune the bugger..

Craig- guess we are gonna try beat eachother now hahah

well this weekends pretty big for me now..

changed the spark plugs, to find that when i bought the car they had put iridiums in already :D SSV did a good compliance!

phenolic runner spacer.

suction pipe thats scotts making up.

then injectors are going in, and Cihan the tuner is coming around on monday to install my emanage, and dump the stock tune on it with bigger injectors..

just untill another couple of weeks before i can tune the bugger..

Craig- guess we are gonna try beat eachother now hahah

So are you tuning next weekend as well then? That's OK bud......I will enjoy the tear's I'll be seeing on your face when I blow your result's to the weed's...lol!

No mate, sadly my finances don't run to Brembo's unfortunately, but I think the R33GTSt calipers teamed with this;

http://www.conceptzp...40203.166.28.81

I should have more than enough brake power.:thumbsup:

Yeh they will be fine...basically the same as what I am running atm!

Yeh they will be fine...basically the same as what I am running atm!

Yeah, I had an R32 GTR setup on my r31, and that kicked arse, so I just wanted the bigger rotors to counteract the additional weight.

^ what the bolt size on those? wouldn't they have both holes drilled for the smaller size bolts?

I get so confused...:wacko:

Yep, but I'll be drilling out the M12 hub bolt holes & retapping for the M14 bolts from the original M35 calipers.

Alternatively, you could just use the bolts that come with the kit and use a sleeve inside the hub bores to take up the gap. Not too keen to do that with the additional bracket though.

Edited by Daleo

So are you tuning next weekend as well then? That's OK bud......I will enjoy the tear's I'll be seeing on your face when I blow your result's to the weed's...lol!

I dunno yet man. Might just wait a fortnight coz i still gotta get the boost sensor. U probably will with the bigger turbo I seriously don't know what to expect anymore. Hopefully more than 250 on e85

I dunno yet man. Might just wait a fortnight coz i still gotta get the boost sensor. U probably will with the bigger turbo I seriously don't know what to expect anymore. Hopefully more than 250 on e85

Lol....just toying with yah...250 is the figure I am after with normal unleaded.

Yep, but I'll be drilling out the M12 hub bolt holes & retapping for the M14 bolts from the original M35 calipers.

Alternatively, you could just use the bolts that come with the kit and use a sleeve inside the hub bores to take up the gap. Not too keen to do that with the additional bracket though.

Dale, where are you getting the adapters for the bigger rotors from?

I keep looking at the ones on ebay in the US for the S14 and the Z32 and wondering if these will work?

Do you have any idea if these will fit our car?

Cheers

Andy

Disassembled my 'stock' seats to remove the airbag sensors today, drivers side had the plug snipped from and when I went to directly wire it in I noticed the wiring on the plugs looked a little odd.. Id say the drivers side has the 2.2 OHM resistor between the wires (couldnt take it apart - the unit was covered in heat shrink and was 'boxy' so I guess they heat shrunk around a small plastic box which contains the resistor connecting the two plugs)! But I was able to plug the passenger side back in, so Ive secured that to the seat and reset the airbag light. Now I get to play the waiting game to see if the blinky light returns :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...