Jump to content
SAU Community

Recommended Posts

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Could it be Atessa related?

Might be....tried bleeding it a couple of times now though.....my go and get it plugged into a consult to run the pump. Onto other new though...the power steering pump works well even though I have no adjustment because if the larger wheel....bit heavy on low revs but nothing unbearable.

drop the shaft from the xfer case to the front diff and see if the vibration disappears

Wont all the transfer fluid drain out?

We really need to find some method of running the attessa pump to assist bleeding, I will look through the wiring diags Prince Skyline lent me but I cant read Japanese...

Wont all the transfer fluid drain out?

We really need to find some method of running the attessa pump to assist bleeding, I will look through the wiring diags Prince Skyline lent me but I cant read Japanese...

Does it happen to be similar to bleeding attesa in a late model gtr?

Does it happen to be similar to bleeding attesa in a late model gtr?

Maybe but cannot find the fuse under the dash.....it's more than likely right in front of my face but I cannot confirm which wire we which!

And yes your right about the shaft Scott!

Maybe but cannot find the fuse under the dash.....it's more than likely right in front of my face but I cannot confirm which wire we which!

And yes your right about the shaft Scott!

isnt it a plug in behind the right kick panel? i remember seeing it somewhere in the stagea manual.. gimme a tic and i will find it.

Here's some pics of everything I've done to the Stagea lately.

Sold the Garrett 2530 and replaced it with a Garrett 3076 :D

post-48775-0-35032000-1298163125_thumb.jpg

Went to see my brother for some stainless allen key bolts and washers to compliment the polishing under the hood.

post-48775-0-81520800-1298163180_thumb.jpg

This is how my engine bay looks now.

post-48775-0-21520600-1298163264_thumb.jpg

Also refitted the HKS pod filter and Greddy catch can. You can also see my radiator and fans setup. There is an oil cooler in there somewhere too :P

post-48775-0-96225300-1298163278_thumb.jpg

:thumbsup:

  • Like 1

isnt it a plug in behind the right kick panel? i remember seeing it somewhere in the stagea manual.. gimme a tic and i will find it.

would be great if you could....then if you could give me a pointer on how or a link to use it that would be great!blush.gif

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Once you work out a fix, let me know! I have the same problem with the vibration under load (and cornering). :yucky:

Here's some pics of everything I've done to the Stagea lately.

Sold the Garrett 2530 and replaced it with a Garrett 3076 :D

post-48775-0-35032000-1298163125_thumb.jpg

Went to see my brother for some stainless allen key bolts and washers to compliment the polishing under the hood.

post-48775-0-81520800-1298163180_thumb.jpg

This is how my engine bay looks now.

post-48775-0-21520600-1298163264_thumb.jpg

Also refitted the HKS pod filter and Greddy catch can. You can also see my radiator and fans setup. There is an oil cooler in there somewhere too :P

post-48775-0-96225300-1298163278_thumb.jpg

:thumbsup:

looks killer mate, when does it get tuned??? who's tuning it for ya??

Once you work out a fix, let me know! I have the same problem with the vibration under load (and cornering). :yucky:

Im pretty sure everyone who has lowered their car has a similar vibration...

  • Nope 1

I FINALLY got on the dyno today.

exhaust is restrictive as, but none the less very happy with the result(for now)

229awkw with 702 NM of torque..

exhaust will be changed soon so we'll see how it is in a month.

ill put up a dyno sheet tomorrow at work :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...