Jump to content
SAU Community

Recommended Posts

2 hours ago, NicPM35 said:

Here's a quick vid of my previously mentioned exhaust. Couldn't make too much noise because I cbf driving miles away from suburbia 

 

Holy that sounds mint!

  • Like 1

Sound deadening in spare wheel well, makes big difference to resonance on the highway, more of the stuff coming to put in the door skins and rear quarters very soon, then the big banana will be cosy quiet 

DSC_0331.JPG

On 03/12/2017 at 10:40 PM, Long and low said:

Where did you get your sound deadening? Cost? I'll hopefully get a vid up of my exhaust this week 

 

Got it on Wish, took a few weeks to get here but bucketload cheaper....

One sheet big enough to replace the bonnet card and wheel well was $36 delivered, its 10mm thick and compresses to 6mm.

I'll try finding the link to seller and Chuck it up on here for interested parties. 

Edited by oxford1327
  • 3 weeks later...

Just picked up these Rohana RC10 wheels. 20x9 and 20x10 with about 43 offset I think.

Ended up needing 5mm spacers on the front because the offset wasn't quite right, so chasing up some longer studs now I think. Not much thread left with the spacer and the wheel.

Both ends sit out of the guards about 3mm, so should look perfect when I get some lower spings. (anyone got spare lowered springs??)

25590264_10155432159344209_284928527_o.jpg

38 minutes ago, NicPM35 said:

Just picked up these Rohana RC10 wheels. 20x9 and 20x10 with about 43 offset I think.

Ended up needing 5mm spacers on the front because the offset wasn't quite right, so chasing up some longer studs now I think. Not much thread left with the spacer and the wheel.

Both ends sit out of the guards about 3mm, so should look perfect when I get some lower spings. (anyone got spare lowered springs??)

25590264_10155432159344209_284928527_o.jpg

I could sort a deal out with Springs if your in nz? I'm going to put in adjustables in the new year

19x9.5 +22  -cobra lows

DSC_0229.JPG

  • Like 1
1 hour ago, Long and low said:

Good improvement.  I couldn't bring myself to sell my Autech rims. They are just sitting in the garage "in case" 

Spot the Easter egg....

DSC_0267.JPG

Chopped? :P

  • Like 1
9 hours ago, m35stagea said:

Got the shits with stock afm and instability in the nm25 so trialing the z33 r35 unit. 

So do you have to (can you) retune the ECU to suit?

Are you saying the Z33 is the same AFM as the R35?

And will the same unit work on the VQ35DE?

  • 2 weeks later...

Installed the RS-R lowered springs from eBay, plus some new 20x8 Vertini rims which fit properly without dodgy spacers. I won't admit how much time it took me to swap the front springs, but in my defence I had about 1ft on either side of my garage to work with. 

Pretty happy with the outcome! 

20180109_190942.jpg

20180109_191228.jpg

20180109_142805.jpg

20180109_190924.jpg

  • Like 7

So last weekend I did the lower arm bushes , radius rod bushes, sway bar bushes,  lower ball joints and the AFM . My press groaned on some of the bushes. Those things are in there very very tight. The ball joints are a prick! 

Ride improved but it also highlighted just how bad my shocks/springs are. Midday today picked up a set of nearly new Tein GT Wagons and a R33 boot brace to make up a front under body brace. 

Fitted the fronts gonna do the rears tomorrow morning, got late for the rattle gun to be going. Took it for a quick spin around the block , holly crap the difference is incredible. 

 

 

My IT monkey hands are hurting and im cut up but it passes the shoe test. 

 

 

WhatsApp Image 2018-01-13 at 8.20.55 PM.jpeg

  • Like 2

Rear springs and shocks done, front underbody brace bolted up. Its now a totally different car. Why did I not do this sooner :huh:??. Drivers rear shock was completely buggered. Could squeeze it down between  my hands and it took upwards of 3 min for it to extend. 

I set my heights on the bench. Will let it settle for a week and then set again. Just need to buy some C spanners , anyone know where I can buy some in Perth?

Of course all this effort has brought my attention to another clunk. Passenger side tie rod has play. So now need to find a set before I go get new shoes and an alignment.

Suspension sorted now set my sights for go mods:) 

  

  • Like 3

I'm long overdue posting an update.. don't even remember what the last thing I posted was lol 

Anyway, some stuffs has happened, most important one is that my car no longer pings... Took it to E&H Motors out in Pukekohe and they found that the timing was off, which is what I had suspected. A fair chunk of money later i'm happy that the car is now 100% better. 

On a cooler note, I bought a LSD diff which I was gonna chuck into a 4WD stag casing but I derped and forgot about the ABS stub axles.. so now I need to try and find some 3x2 LSD ABS stub axles that I can use... otherwise I might try find some 5x1LSD ABS stub axles and put them in it, but that involves buying the axles as well... 

IMG_0518.thumb.JPG.47145efa2bcb69db02e993f1c1860fab.JPGIMG_0517.thumb.JPG.8ad87bed83f34ddb4bbf91a4b2b8cf00.JPG

 

Also got given a spare casing, but I can't use that anyway. 

IMG_0520.thumb.JPG.1cf6dd5dfe400eafaea942f85e794f05.JPG

 

You can see the ABS ring on the stub axle that I need, apparently the open diff one that I have is too short to be used in the LSD unfortuantly. 

IMG_0540.thumb.JPG.6232f4c9f909abc8761a67c0fa6512c0.JPG

 

Also changed out my coolant and changed spark plugs/coil packs to brand new ones.

Other than that nothing cool has happened haha

 

  • Like 1

Just pressed in a new bearing for the AC idler pulley. Statewide sold me a 6301zz for 5 bucks cause they had em on shelf but not in the POS. :3_grin:. No more howling AC huzzah! 

On 1/9/2018 at 9:23 PM, NicPM35 said:

Installed the RS-R lowered springs from eBay, plus some new 20x8 Vertini rims which fit properly without dodgy spacers. I won't admit how much time it took me to swap the front springs, but in my defence I had about 1ft on either side of my garage to work with. 

Pretty happy with the outcome! 

20180109_190942.jpg

20180109_191228.jpg

20180109_142805.jpg

20180109_190924.jpg

Looking good! So what offsets work on the 8 in rims? Different front and rear?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...