Jump to content
SAU Community

Recommended Posts

How bad is the damage? Just the bumper or potential chassis?

The lower back panel and floor panel have been pushed in, as well as damage to the LHS rear quarter :(

A bit difficult to see but in the pic, you can just make out the offset of the boot to the body.

Since the other douchebag had no insurance and I have to go through my own cover, I'm now required to obtain quotes from different panel beaters, as oppose to just taking it to my preferred place.

The guy was tailgating me as I approached a round-about. I could tell he was too close but it was either I kept driving and get t-boned from another car going around or stop in the hope he'd stop too :/

If people have no insurance, then why do they drive so erratically? So stupid :rant:

Yesterday I got rammed from behind by a guy in a Lancer, then we exchanged numbers :turned:

This happened to me today :( A p-plater girl hit the back of my car as I was stationary at the traffic lights. Her car had basically no damage, but mine had scratches on the bumper and the back of the car is moved in. Since my car was in mint condition I'll be making sure the repair is 100%, will also get the panel beaters to include a wheel alignment in there as it feels slightly off now. Luckily she has insurance (apparently) so I'm hoping to get it taken care of soon.

The lower back panel and floor panel have been pushed in, as well as damage to the LHS rear quarter :(

A bit difficult to see but in the pic, you can just make out the offset of the boot to the body.

Yep, also had the floor panel pushed back, it wasn't snapped, but it was hard to get out and I can't get it back in until the back of the car is fixed. Luckily nothing else seemed damaged.

post-119855-0-45310600-1396508523_thumb.jpg

This happened to me today :( A p-plater girl hit the back of my car as I was stationary at the traffic lights. Her car had basically no damage, but mine had scratches on the bumper and the back of the car is moved in. Since my car was in mint condition I'll be making sure the repair is 100%, will also get the panel beaters to include a wheel alignment in there as it feels slightly off now. Luckily she has insurance (apparently) so I'm hoping to get it taken care of soon.

Yep, also had the floor panel pushed back, it wasn't snapped, but it was hard to get out and I can't get it back in until the back of the car is fixed. Luckily nothing else seemed damaged.

Feeling your pain, dude.

The insurance company has been quite helpful, so fingers crossed it's a smooth process in getting your beast repaired.

Since her insurance will be paying for the fix, I think you can take it to your preferred repairer :D and it'll be all sorted.

This happened to me today :( A p-plater girl hit the back of my car as I was stationary at the traffic lights. Her car had basically no damage, but mine had scratches on the bumper and the back of the car is moved in. Since my car was in mint condition I'll be making sure the repair is 100%, will also get the panel beaters to include a wheel alignment in there as it feels slightly off now. Luckily she has insurance (apparently) so I'm hoping to get it taken care of soon.

Yep, also had the floor panel pushed back, it wasn't snapped, but it was hard to get out and I can't get it back in until the back of the car is fixed. Luckily nothing else seemed damaged.

damn :(

P for pathetic :P

is there a wheel well in the boot? so boot itself not caved in or anything?

damn :(

P for pathetic :P

is there a wheel well in the boot? so boot itself not caved in or anything?

Yep, I asked her how she think it happened, didn't really get a response haha

I don't think the boot is caved in, it looks to be just the metal where the "Skyline" badge is (I think bumper support?) that is caved in. There is a local repairer just around the corner that looks decent, so might go there tomorrow. I wanted to get a wheel alignment soon anyway, so I guess I'll get them to include that.

farkin mohsen sending me shit!

10168955_10203578265680192_906743860_n.j

Hey plattsy, now I know how I will prank all my friends who leave their phones lying about without pin codes. Random numbers asking for cock pics.

damn :(

P for pathetic :P

is there a wheel well in the boot? so boot itself not caved in or anything?

Hey man, don't be ragging on the P.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...