Jump to content
SAU Community

Recommended Posts

whats peoples thoughts on living next to a rail way line & crossing down the road?Would the crossing noise be a headache?Auction this weekend & in two minds about placing a bid...

Trains are fine...its the bells an the crossings that would drive you ceazy...same with living next to pedestrian crossings with the beeper going off constantly...

Like anything you learn to switch off to it after a while

Where you buying?

If it aint noisy buying near a railway station is always a plus

Looking at Coburg. Upfield line?

Do it Pat

I live right next to a station, it has never bothered me at all

Bit of a moot point however; some Chinese investor is going to outbid you

haha tell me about it.

There was another auction which had a price range listed. The property passed in with the reserve above the auction price range?

Alex pls explain.

Looking at Coburg. Upfield line?

haha tell me about it.

There was another auction which had a price range listed. The property passed in with the reserve above the auction price range?

Alex pls explain.

Ahh yeah northside. You can go to r32 meets with mohomo

And you can upgrade your turbo right near Hypergear

  • Like 1

Looking at Coburg. Upfield line?

haha tell me about it.

There was another auction which had a price range listed. The property passed in with the reserve above the auction price range?

Alex pls explain.

I'll field this one

Marketing

Some dude from QLD was just on a replay of the drive show on fox fm telling a story about how he was driving his skyline next to a truck & needed to get into turning lane but truck in way, so he went underneath the truck fast & furious style. post-34191-1424845136496_thumb.jpg

  • Like 2

so your ac and demisters arent working?

try an auto elec for demister. they should know someone for AC

thanks

try an auto elec for demister. they should know someone for AC

thanks

they should know someone for AC

thanks

should know someone for AC

thanks

someone for AC

thanks

AC

thanks

thanks

thanks

thanks

There was another auction which had a price range listed. The property passed in with the reserve above the auction price range?

Alex pls explain.

Agents a prick I hate under quoters.

How they get away with it you ask? They quote the agents estimate of selling range and put vendors reserve price as TBA on authority thus they are allowed to quote off the esr they've provided which has to be substantiated by sales (easy to manipulate) owner sets reserve on auction day agent changes price accordingly all legal.

If you wanna fk up the agent submit a written offer of full price prior to auction if the vendor rejects they are legally required to raise the ask to no less than the price you put forward

  • Like 1

Must be Adam Goodes' distant cousin (because they're both PC hypersensitive whingebags, not because they're both black...I'm not racist I promise, I'm sorry, oh god I'm sorry)

http://mobile.news.com.au/entertainment/celebrity-style/giuliana-rancic-apologises-for-racist-joke-about-dreadlocks/story-fnk82m4n-1227238232463

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...