Jump to content
SAU Community

Recommended Posts

AD08R's are miles ahead of KU36's, very impressed with them.

Tried to source a set of 235/40/17 AD08R's, but no luck whatsoever as they're out of stock nationally and the ETA for the next batch is 'unknown'.

Then tried to source some Toyo R888's instead, but no luck as none in stock nationally and none on order.

So it looks like im even gonna have to source my farkkkinn tyres direct from Japan.

my take on these street-track crossover tyres is that anything that costs as much as cheaper semis is pointless - buy the semis! So for me that rules out AD08, RS3 and R1R. If you really have to have the fastest tyre over 120 UTQG reagardless, WTAC pre-control tyres pretty much proved its the RS3. And they should be cheaper than AD08 too.

Otherwise that basically leaves the choices down to KU36, RSR and 123S if you're looking for something cheaper than semis that will do an OK job on the track and road..

RSR are the fastest of the rest but wear out so quickly that buying semis works out to be better value.

KU36 - I've had these on a Supra and Legnum. They do respectable times and can cop an absolute flogging. They were quiet on the Supra but noisey on the Legnum. They were good in the wet imo, but many disagree with that. 180 treadwear. These lasted as long as normal road tyres on my Supra and did heaps of track days locally and interstate. I wouldn't hesitate to buy these again.

123S - all i really know is the Excel racers do pretty respectable times on them. 200 treadwear and very deep tread - might be a bit squirmy at first but they should last pretty well. Sidewalls seem nice and stiff too. I just put a set of these on my Datto yesterday. The main reasons I chose these over KU36 was that he had them in stock and gave me a pretty sharp price on them.

Car is set up for R comps which are used for proper track days and will stay that way. Don't want to get a wheel alignment every time I change tyres so will live with the less than optimum setup for the roadies.

AD08R's are miles ahead of KU36's, very impressed with them.

ok let's do the exercise step by step. My Soarer needs new rear tyres: 265/35 R18

Yokohama AD08R $467ea

Hankook RS3 $ ?? couldn't find a price, but even the Z221 semi is $479 - a whopping $12 more than AD08R!

Kumho KU36 $225ea

Nitton NT05 $220ea

Achillies 123S $195ea

Federal RSR $190ea

Nankang NS2R $179ea

one of these things is not like the others!

It's good to hear they're miles ahead of the KU36. They'd bloody well want to be - they're more than double the price! You're paying full on semi-slick money for them. Why not just buy semis? Semis won't last a whole lot less using them on the road. Here's a couple that are way cheaper than AD08R

R888 265/35 $380ea

NT01 275/35 $280ea

The only reason I can see to buy AD08R is if you are competing in Superlap Clubsprint class.

One thing to consider is that there are people claiming to have done 12 track days and 5,000km on the street on AD08Rs. Certainly not possible to get that sort of economy out of A050s

I actually got around 18days over 2 years and +15,000km on a silvia running 235/45/17. The replacements were $300pc fitted/balanced and unlike Harry, other road tyres weren't that much cheaper whereas decent semis were quite a bit more, only r888 came in at that price.

fair enough if you can get them for a similar price as other crossover tyres, or if you're in an event/series that requires these sort of things. I guess with more events having street tyre classes these days it's kinda changing the equation a bit - if you want to be competitive, you buy the best tyres allowed regardless of cost.

18 track days is pretty impressive life! My old Supra got 12 track days and 15,000km on KU36s before the rears wore out, and I thought that was good...

ok let's do the exercise step by step. My Soarer needs new rear tyres: 265/35 R18

Yokohama AD08R $467ea

Hankook RS3 $ ?? couldn't find a price, but even the Z221 semi is $479 - a whopping $12 more than AD08R!

Kumho KU36 $225ea

Nitton NT05 $220ea

Achillies 123S $195ea

Federal RSR $190ea

Nankang NS2R $179ea

one of these things is not like the others!

It's good to hear they're miles ahead of the KU36. They'd bloody well want to be - they're more than double the price! You're paying full on semi-slick money for them. Why not just buy semis? Semis won't last a whole lot less using them on the road. Here's a couple that are way cheaper than AD08R

R888 265/35 $380ea

NT01 275/35 $280ea

The only reason I can see to buy AD08R is if you are competing in Superlap Clubsprint class.

Hey mate,

Not sure if you tried Traction Tyres, but I got AD08R's in the same size for 380 (think it was actually 365...can look at the receipt if u want), a couple of months ago.

I was quoted 430 for 285/30/18.

  • 4 weeks later...

about to give a few options a try

r888 were shit but consistently shit

just put a set of ao50m's on so will let ya know how they go compared to the 888's is expect them to be awesome for a lap then f**k out with the gtrs weight

then will review against a set of c70's

TAlking about AD08s and RS3s in this thread?

They aren't semi slicks / r-compounds at all!

Nobody said they were. In fact, the discussion started with someone saying he already had R-comps but wanted some S-comps for driving to events about 400km away and as a road tyre iirc.

Edited by hrd-hr30

No argument there, but a circuit capable tyre for less than half the cost of most r-compounds is worth mentioning.

Haha just having a stir :)

Nitto NT05 pricing outta Taleb is almost the best value atm IMO. My set of 20" is like 1,100... Now that is cheap.

  • 4 weeks later...

well tried the hankcock c70, i bought 6 295/45/18 for 500

some were pretty thrashed

compared to the new r888's i had on they were epic

almost hit the first water filled barrier on the track because when i turned the steering wheel the car tunred

scared the shit out of me

easily held 10km/h higher speeds mid corner

would band again

i am guessing if you bought new one they would be ever better

well tried the hankcock c70, i bought 6 295/45/18 for 500

some were pretty thrashed

compared to the new r888's i had on they were epic

almost hit the first water filled barrier on the track because when i turned the steering wheel the car tunred

scared the shit out of me

easily held 10km/h higher speeds mid corner

would band again

i am guessing if you bought new one they would be ever better

You talking about the soft compound Z221 - the C7?

How are they relative to the A050's?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...