Jump to content
SAU Community

Recommended Posts

COTF shares an almost identical weight distribution to previous cars.

The old diffs were heavy and by the time you added drive shafts, spool center, crown wheel and pinion, diff bracing, watts link , bearing carriers, brakes etc to them the weight crept up.

The tank was also behind the rear axle. A full fuel safe sprint cell with swirl pot reserve and pumps was around 130kg.

The new transaxle is lighter than the fuel system and diff of old combined.

The COTF fuel tank is slightly heavier than the Hollinger which was In roughly the same position (further forward obviously but I between the axle none the less)

The chassis are not that dissimilar in terms of torsional rigidity and behaviour.

Regardless of what people think the floor pans of last years car right back to VX have very little incommon with the road car.

Are the DVS cars still a relivent stepping stone to the main game with the new cars? I notice Luff and Purcat are in Porsche Cup this year, and I remember Skaife saying this years cars drove more like Porsche Cup cars

Yes still relevant - but obviously not as much as last year. The COTF is, fundamentally, a different beast to setup & drive than last years cars. One result will be that the co-driver/internationals (if they are going to the Gold Coast this year) wont suck as much in comparison to the regulars as the cars are

A: Easier to drive

B: More like other categories in the way they drive.

It is for GTR and skyline owners.

I've owned over 15 of them in 10 years.......

When I locked up tonight there was 14 cars in my workshop, 8 of them are Skylines, 7 of those are seriously high end preped Motorsport cars.

.....

But how many could do 1000 racing Kms around bathurst? The engineering on Gibsons cars was amazing. It may be old now, but doesnt make it bad. Group a also gave some creative interpretation of rules, which was interesting, and something you don't get in the current series, for better or worse.

You can still see the grp a cars, and get closer than you ever would have been able to for the fans. Go to http://www.heritagetouringcars.com.au/

On topic, I really looking forward to seeing the v8s this weekend. Hopefully the new marques can improve, and the Mercs have a more consistent meet.

Honestly there is 3 I'd send up there as is and one more that would be close.

There is harder places on the tour than Bathurst. Clipsal was one of them. Chaos canyon on surfers is obviously another.

What GMS did with the GTR will always be admired. They took a nugget of a car and made it great, no doubt.

I'm betting there will be a win this year for Scotty mcglauclan. GRM have a pair of good cars this year and Scott has a lot of COTF miles. On one of his better known circuits I think he will come out on top.

quiet thread is quiet.

Couple of good races today, looks like some of the nissans are set up really soft in the front end- searching for fnt end grip maybe?

What happened to the Merc? Did it pop an engine today? I saw lots of smoke on the screen, I did wonder if he over rev'd it coming into T1, because it did sound tough right before the smoke poured out.

Was right about him getting a win but so early was surprising.

Even though 6 faster cars were relegated to the back helped his cause its good to see.

Hopefully he'll back it up. Great for Rodgers to finally get a win on the board too. Caruso was a bit of a flop and captain crash spent more time running into things than racing.

From what I understand ECU base timing was 7 or 8 deg and the crank sensor had been adjusted to give the 6 deg required base timing.

Timing light would have displayed 6 deg which is why there was no performace gains but the ecu has its trigger angles locked and they had 7 or something as base.

Chances are the engines have all been like this since they left the engine shop (they all use the same engine shop bare the Kelly's) Kelly's engines may have been at the same shop prior to Melbourne though.

There would have been no data available to V8 supercars from previous rounds so they could only infringe the last race.

When I installed the KRE built aurora engine in my VY we used a timing light and adjusted the crack sensor to get 6degrees base. Never even looked at what the ecu had as base.

There is actually very little you can do with the controlled ECU as far as ignition mapping goes. You have maximum timing numbers and the engines take those numbers very very easily. So its a case of throttle open maximum allowed timing and trim the fuel to suit done.

What is the go with Moffat? Is he lucked upon some good results or is the guy actually reasonably talented and starting to find some form?

I can't stand Moffat.

There is something about the guy that irritates me. He has had some shining moments for sure.

  • 2 weeks later...
  • 3 weeks later...

some very good racing this weekend. certainly showed why it deserves it's place at the top of australian motorsport. plenty of close racing, with a bit of panel rubbing. as far as viewing goes, it really does make f1 look pretty boring, where the cars being within a few metres of each other only really happens on behind a safety car

  • 1 month later...

120L of fuel in the cell. I know the aurora engines the fast holden teams have use on average .9L/km. Kelly's claim they having fuel consumption issues so wouldn't surprise me if they are using 1.2L/km. plus the formation lap would have them out of fuel buy the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...