Jump to content
SAU Community

Recommended Posts

COTF shares an almost identical weight distribution to previous cars.

The old diffs were heavy and by the time you added drive shafts, spool center, crown wheel and pinion, diff bracing, watts link , bearing carriers, brakes etc to them the weight crept up.

The tank was also behind the rear axle. A full fuel safe sprint cell with swirl pot reserve and pumps was around 130kg.

The new transaxle is lighter than the fuel system and diff of old combined.

The COTF fuel tank is slightly heavier than the Hollinger which was In roughly the same position (further forward obviously but I between the axle none the less)

The chassis are not that dissimilar in terms of torsional rigidity and behaviour.

Regardless of what people think the floor pans of last years car right back to VX have very little incommon with the road car.

Are the DVS cars still a relivent stepping stone to the main game with the new cars? I notice Luff and Purcat are in Porsche Cup this year, and I remember Skaife saying this years cars drove more like Porsche Cup cars

Yes still relevant - but obviously not as much as last year. The COTF is, fundamentally, a different beast to setup & drive than last years cars. One result will be that the co-driver/internationals (if they are going to the Gold Coast this year) wont suck as much in comparison to the regulars as the cars are

A: Easier to drive

B: More like other categories in the way they drive.

It is for GTR and skyline owners.

I've owned over 15 of them in 10 years.......

When I locked up tonight there was 14 cars in my workshop, 8 of them are Skylines, 7 of those are seriously high end preped Motorsport cars.

.....

But how many could do 1000 racing Kms around bathurst? The engineering on Gibsons cars was amazing. It may be old now, but doesnt make it bad. Group a also gave some creative interpretation of rules, which was interesting, and something you don't get in the current series, for better or worse.

You can still see the grp a cars, and get closer than you ever would have been able to for the fans. Go to http://www.heritagetouringcars.com.au/

On topic, I really looking forward to seeing the v8s this weekend. Hopefully the new marques can improve, and the Mercs have a more consistent meet.

Honestly there is 3 I'd send up there as is and one more that would be close.

There is harder places on the tour than Bathurst. Clipsal was one of them. Chaos canyon on surfers is obviously another.

What GMS did with the GTR will always be admired. They took a nugget of a car and made it great, no doubt.

I'm betting there will be a win this year for Scotty mcglauclan. GRM have a pair of good cars this year and Scott has a lot of COTF miles. On one of his better known circuits I think he will come out on top.

quiet thread is quiet.

Couple of good races today, looks like some of the nissans are set up really soft in the front end- searching for fnt end grip maybe?

What happened to the Merc? Did it pop an engine today? I saw lots of smoke on the screen, I did wonder if he over rev'd it coming into T1, because it did sound tough right before the smoke poured out.

Was right about him getting a win but so early was surprising.

Even though 6 faster cars were relegated to the back helped his cause its good to see.

Hopefully he'll back it up. Great for Rodgers to finally get a win on the board too. Caruso was a bit of a flop and captain crash spent more time running into things than racing.

From what I understand ECU base timing was 7 or 8 deg and the crank sensor had been adjusted to give the 6 deg required base timing.

Timing light would have displayed 6 deg which is why there was no performace gains but the ecu has its trigger angles locked and they had 7 or something as base.

Chances are the engines have all been like this since they left the engine shop (they all use the same engine shop bare the Kelly's) Kelly's engines may have been at the same shop prior to Melbourne though.

There would have been no data available to V8 supercars from previous rounds so they could only infringe the last race.

When I installed the KRE built aurora engine in my VY we used a timing light and adjusted the crack sensor to get 6degrees base. Never even looked at what the ecu had as base.

There is actually very little you can do with the controlled ECU as far as ignition mapping goes. You have maximum timing numbers and the engines take those numbers very very easily. So its a case of throttle open maximum allowed timing and trim the fuel to suit done.

What is the go with Moffat? Is he lucked upon some good results or is the guy actually reasonably talented and starting to find some form?

I can't stand Moffat.

There is something about the guy that irritates me. He has had some shining moments for sure.

  • 2 weeks later...
  • 3 weeks later...

some very good racing this weekend. certainly showed why it deserves it's place at the top of australian motorsport. plenty of close racing, with a bit of panel rubbing. as far as viewing goes, it really does make f1 look pretty boring, where the cars being within a few metres of each other only really happens on behind a safety car

  • 1 month later...

120L of fuel in the cell. I know the aurora engines the fast holden teams have use on average .9L/km. Kelly's claim they having fuel consumption issues so wouldn't surprise me if they are using 1.2L/km. plus the formation lap would have them out of fuel buy the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...