Jump to content
SAU Community

Recommended Posts

301rwkw at 20psi? :P

Sonofabitch! :P

Over 9000

Well trents dyno said 301kw but my scouter did say over 9000.

post-84937-13787889477121_thumb.jpgpost-84937-13787889653874_thumb.jpg

Sorry for the small photos but its all I have at the moment. I understand that stao is currently pulling my car apart in an attempt to fix my boost control issues, which are pretty obvious if you look at the dyno graph.

Hopefully get it sorted before this weekend as I am travelling down to pick it up. But Trent and Cat are absolutely fully booked out. Does anyone know of any other tuners in Melbourne that are open Saturdays? All the idle stuff is done and its tuned for that boost plot currently. Will just have to get someone who knows what they are doing with a greddy profec b spec 2 to sort out the boost control and do a power run to check the tune is still fine.

  • Like 1

Right. Well I'm drunk at the moment but picked up the 32 today and holy shit it's an angry car! Made 312kw@20psi and it goes like a shower of shit. Will give more detailed results tomorrow.

Also, pics. Because everyone likes pics.

post-84937-13791539433543_thumb.jpg

  • 1 month later...

So, been a while since the last update.

Basically i have been doing minor things since getting it back from trent. Stereo, gauges, tidy up wiring etc. Have done 2 drift days and holy shit it is a different car to drive.

Second gear is useless and third gear is now where it's at. Still have power steering issues that i am yet to fix.

Basically i am stoked with it and just need to drive it more often haha. Will update thread with more info/pics if people are interested.

  • 2 weeks later...

Yeah went in no worries man. The paint on them was shit and started flaking off but apart from that it is all sweet. And a bottle of jimmy is the least i could do for the run around that Brad gave you!

http://www.youtube.com/watch?v=SdRv1bXTv04

  • 3 weeks later...

^ just paste the address into the WYSIWYG editor and it will do the rest :)

Also, how are the lines holding up from Kando? Mine arrived yesterday, but those idiots at the dim sim factory sent the wrong crush washers LOL

Yeah, i made sure that i did everything possible to help them out. My mates Subaru liberty (which sits lower than my car) seemed to be fine, don't know how they managed to f**k mine up so bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...