Jump to content
SAU Community

Recommended Posts

As for torque monster....its only 3.2L

No engine with only 3.2L to play with will be a low down torque monster

Arh yeah, you should climb into my 32 one day, only 2.6 and a massive torque monster

I was in Canberra over the weekend with the 34 doing the hill climb

  • Like 1

You can't tune past 25 on 98, if you're lucky.

You'll get heaps more on E85. e.g. my car made 100kw more with 2-3psi increase on E85, over 98

Paul was saying something similar and I will do an E85 tune but not a lot of chances to use it here and I am happy enough with how it runs on 98, it is fun as a DD :)

It will be interesting to see what the E85 produces with this builds specs ?. Looking at some posts it seems to vary quite a bit from car to car ??

Dont get me wrong, this car gets up and goes pretty good and is easy on the bends with the more linear acceleration and the drive train seems great, smooth and planted , but pushed really hard ??????

The thing is. Why get a big hp turbo and not use it to its potential?

If you really wanted response then you could have gotten a smaller single that would spool quicker and get you to 380/400 kW

I was learning, took a T78 off and put the 6262 on and it went much better, still not happy BUT accept for the cams I kept most of the bolt ons and did the 3.2 build. If I am not happy I will do something about it,.

But for now happy enough, tomorrow ???

The thing is. Why get a big hp turbo and not use it to its potential?

If you really wanted response then you could have gotten a smaller single that would spool quicker and get you to 380/400 kW

On petrol? As said earlier, you're really boost limited on 98, WHICH HE IS ON ATM!

Give the bloke a chance to get it drunk and turn the wick up.

I can't see a smaller turbo on 98 getting close to the 400 mark.

Far too many guys just look at the peak number. I'm sure if guys got in it and drove the thing they would get out pretty impressed. Midrange grunt > topend. Keep the top end for pissing in your mates pockets in the pub.

Wow. Tell us what you really think Paul.

Anyways. Wouldn't be a problem if he wasn't hell bent on response. But now it's a double standard.

Not my car.

Paul never says what is on his mind, wimpy fag !

Where is the double standard ?

I expected more but happy with what I have, it is a well balanced DD, goes quick and holds the road like shat to a blanket, all good :wub:

Just a couple of tweaks and :)

  • Like 1

Its all good, like Paul said no doubt it will be a torque monster. More boost and ethenol will make heaps of difference. If your spark is failing which sounds like it may be the case, id consider getting a Morris tech ignitor like myself and Paul (I know you already have spitfire coil packs).

And I agree with Micks post.. CRD are a rip, I've seen some of their invoices and they prey on the unknowing. And their tunes are not the best in the business.

Best result would be.

Get password, take to UE, get re-tune.. Happy days.. If they built the engine properly, it won't blow up

  • Like 1

$1600 :(

It is hard being in this situation, I have an expensive build and once I change shops my warranty goes out the window and the new shop does not put their warranty on the car ?

There are a few things I am not happy with and will try and work it out first.

And 1600 for a petrol tune is f**king bullshit.

If they gave me 1600 to tune my car I'd still tell them to stick it

Edit 1600... Still f**ked

you get the invoice after the tune , what the f**k can you do

Its all good, like Paul said no doubt it will be a torque monster. More boost and ethenol will make heaps of difference. If your spark is failing which sounds like it may be the case, id consider getting a Morris tech ignitor like myself and Paul (I know you already have spitfire coil packs).

And I agree with Micks post.. CRD are a rip, I've seen some of their invoices and they prey on the unknowing. And their tunes are not the best in the business.

Best result would be.

Get password, take to UE, get re-tune.. Happy days.. If they built the engine properly, it won't blow up

The 34 has built in ignitors, the Mojo LS2 kit is what i'm going to get

  • Like 1

Arh yeah, you should climb into my 32 one day, only 2.6 and a massive torque monster

I was in Canberra over the weekend with the 34 doing the hill climb

I'm sure it is torquey.....for a 2.6

but compare it to...oh I dunno a blown 6.2 LSA...both at road speeds and revs.

That's what I was getting at

Going to get it all done and dusted and work out what I want to do.

I will get the E85 flex tune soon.. and when I am getting that done I ask about ignitors . Spitfire coils any good ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...