Jump to content
SAU Community

Recommended Posts

Drove an FG XR6 with 450kw at the rears

Scary quick, but lacks build quality. Creaky door trims, paper thin front guards, bootlid rubbing on rear bar, overly high driving position, mudflaps held in place with single screw (loosely), unpainted plastic door mirrors and shiny plastic door frame inserts...

Yes I agree the build quality can be lacking in parts. Thin panels and plastic where it should really be metal, I've found most new cars are similar.

Also agree the commodore interior is shitloads better than the falcon, if I could get the falcon gearbox and engine in a VE commodore I would take it every single time.

Edited by Rolls

Falcon has a lot more then 2 airbags, I had a typhoon that made 395rwkw and it was an animal and made the power so easily (still had the factory turbo)

Unfortunately build quality let it down as it did on the fg xr6t I owned later, that and the price of fuel climbing at the time and it drinking it faster then I could put it in the tank

Have fun replacing Diff bushes constantly (Requires subframe removal)

Have fun replacing Heater mixer shaft when it breaks. hopefully you have the updated stronger one. (Requires Dash out).

Have fun replacing all the engine rubber seals and electrical connectors due too excessive heat. (From memory the thermostat is somewhere near 92 degrees)

Have fun replacing all the front end bushes due to being flogged out.

Making all that power is fun but in the long run the maintenance bill will be higher if you don't work on the car yourself.

I owned at XR6T and while the engine is by far the best part of the whole car, the rest of the car is poorly engineered.

I couldn't believe how bad all the suspension bushes were after such low km's.

I have owned a 180sx, Silvia, Chaser & a stagea. After working on all these cars the significantly older cars are

1. Easier to work on

2. Handle better

And 3. Run cooler.

My 2c. Take it or leave it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I strongly recommend anyone playing with cars chasing anything electric, get a basic understanding of using a DMM, and about 12V DC systems. They're REALLY easy, you only need to know V=IR and how to apply it, and you can work out what your readings should be doing. For a simple check on a light bulb, you're looking for 12V at the positive to the light, a near zero resistance to ground, and then for a small resistance across the globe when unplugged. If one of those values isn't right, you won't get what you need. Now if they're all okay,and you then plug the light in, and it still won't work, you now do a voltage check across the globe positive to negative. It should effectively read full battery voltage. If it's not, especially if it's quite low, the age old V=IR starts to be able to be thought about, you now know though, for the current flowing, there isn't much voltage for the given resistance, but the rest of that V has to be dropping somewhere else. So now do a voltage check from ground of globe, to ground of car, then do voltage check from positive of battery, to positive of the light connector. Things like a high resistance in a wire/join will start to "steal" voltage on you. So now step back through which ever wire, until you find the voltage drop is non existent, you're now before what ever is steal your voltage for example.   There's plenty of YouTube videos, but really worth understanding some V=IR, and doing some even theoretical numbers to start to understand it. Then you'll know what the DMM is telling you.
    • Is Jackie home by Friday?
    • Item 10: Tech Edge wideband sensor interface and display. You’ll need to buy a new sensor. $150. Item 11: part of a Willians 5 point harness. $40 Item 12: OS88 gear display. No need for it now, my PPG sequential came with one. $30
    • I took it out, even though I knew I probably don't know what I'm doing other than looking for power signal lol. Lesson learned here I guess, even if it looks normal, worth checking as it only takes a few seconds anyhow. And maybe disconnect the battery, even though really shouldn't have to.
×
×
  • Create New...