Jump to content
SAU Community

Recommended Posts

So shall we guess birds pi track times?

I'm guessing stock manual Toyota 86 2.05

Any further guesses?

As a comparison my first go was a 1.57 Zorst pod and a little boost, lowered springs so no castor camber adjustment...

No tune so 160ish

Got my goal of a sub 2 minute time...

How the hell do you get a 1:57 on a stock S14, and I'm 2 seconds off that with 230km/h down the main straight and AD08R and dialed in suspension?
Oh yeah, I need to learn how to drive now. :(

So while Birds and I were busy flying the SAU flag at Phillip Island, we totally missed that Alex revealed himself again to be a total f**king moron ?

Thanks again for your help with the engine troubles - she ran pretty happy for the trip home.

Jase and I noticed a blown turbo gasket too, so that was the high pitched squeal I was hearing when coming on boost. Driving on the street it now sounds like I have an ex gate :rofl:

Got my goal of a sub 2 minute time...

How the hell do you get a 1:57 on a stock S14, and I'm 2 seconds off that with 230km/h down the main straight and AD08R and dialed in suspension?

Oh yeah, I need to learn how to drive now. :(

Nice work. Yeah sub 2min is friggin solid effort. Lots of late braking and solid corner speed...

Oh yeah, my 2min 20+ was with no clutch. :P

Barnaby Joyce, while speaking to a room of ESL Chinese delegates decides to use a "battered sav" as a euphemism for low quality product.

What do we pay these idiots for again?

It gets better... clearly these people didn't know what a battered sav is, so he explains it as being part of the Australian diet. Realising he has now said the Australian diet consists of "low quality product" he back pedals by saying it's only given to people if they have bad parents.

LOL

Another English-thing the Aussies like, and known colloquially by Aussies as “savs,” saveloys are a seasoned hot dog-like sausage. They are boiled and served in a slice of bread or in a bread roll with tomato sauce. A “battered sav” is a battered saveloy which has been battered, deep fried and served with tomato sauce.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...