Jump to content
SAU Community

Recommended Posts

12 minutes ago, IMACUL8 said:

Thanks Ben

As far as a Quaife sequential - that's what I had previously - never again.

Is that because of parts support from SVS or because the box wasn't up to it ? You had a QBE33G, the 750hp rated one from memory right ? The current QBE91G sequential is a completely different beast (released in 2017) and I am yet to hear of a failure - has much higher torque load rating and seems like they actually have it right this time.

I used to deal with then a lot with the Trust / Quaife H dog box and found their parts support pretty decent. 

Anyway best outcome is really to sort your Albins issues out directly with them.

 

  • Thanks 1

Man that sucks.  you've got all the nice fruit and to be held up bolting it all together because of a few little componenets  must be bloody annoying!

Sell the gearbox and buy a pool for the kids?

 

  • Like 1

lol - already got the pool mate ;)

Its D day.......   consumed with this..... Pass the albins off now - and slide over to Samsonas.... or stay with Albins.....

Thanks for the recommendation Brett.......  for me the big thing is how easy Jason is to deal with - and how quick he responds / communicates with me....  that gives me confidence in the event of any issues.......

 

 

  • Like 1

My 2c, stick with the Albins, stay on top of your supplier and roast them for the delay, but wait it out. I know a few boys now running the Albins and all are very happy with them. Think of it like this, it would be a GTR if it didn’t give you stress! 

  • 1 year later...

Update.

Stage 2: (Aug 20 – Feb 22)

Borg Warner EFR 8474

Albins ST6 Gearbox - 6 Speed / Street Ratios

Platinum Racing Products - Billet Sequential Shifter Unit

OS Giken 4RC Clutch

Haltech Elite 2500 PnP ECU

Flex Fuel

Recaro Sportster CS Seats x 2

Bride Super Seat rails XR Type x 2

Work Meister SP1 S3 18x10.5 +12 

Catch Can Modification – add filters / coat

Custom 3.5” Stainless Down Pipe

Custom Gearbox Oil Cooler (Rear mounted)

Custom Power Steering Reservoir/Bracket

Silicon Intercooler Joiners - Black

Aeroflo Fuel Rail

2000CC Bosch Injectors

Custom R34 GTR Steering Wheel – Carbon Fibre / Alcantara

Samco Black Radiator Hose kit

 

 

GTR_1.jpg

GTR_2.jpg

GTR_3.jpg

GTR_4.jpg

GTR_7.jpeg

GTR_8.jpeg

GTR_9.jpg

GTR_0.jpg

  • Like 8

Yes - The current shifter PRP are selling for the Albins boxes - "Billet Sequential Shifter Unit" - is what I had to wait for.

The package was sold to me as a bolt in option - no mods to tunnel required / no mod to tail shaft etc.

The box itself fits amazing - mechanic said fitment was spot on - just like factory.  Uses stock shafts and standard cross member to - no need to purchase different cross member. But the shifter initially supplied did not work with standard tunnel - it would need to be modded - which I was not willing to do.  So that's where the drama started. Back and forth for 9 months / 3 or 4 versions - and finally we have a shifter that fits without tunnel mod.

Special smaller / bent fittings are also needed to make the gearbox oil lines fit with no issue/no mods to tunnel.

The actual box - is fantastic.  Extremely happy.  Ill post a vid of the sound !

 

Edited by IMACUL8
  • Like 1

I really like the shifter as it doesn't have the bulky base like the Samsonas.  I am having the factory gear boot re-done in Alcantara with the opening just slightly larger to accommodate the shifter.  Once fitted - will look stockish at the base with just the shifter giving away any clues of shenanigans! 

Edited by IMACUL8
  • Like 6

I will post some better pics soon - I have car for run in and it will be going back for a finish up / check soon (including new coils).  I'm still waiting on a few finishing cosmetic items.

I must say a big thank you to Benny who is a big advocate for the EFR turbo - the 8474 with the 2.7L is a response monster.

Power everywhere - every gear - instant power.  Its amazing.  Car will be re-dynod when it goes back with new coils and I will post results after that.  As a comparison to my T76 (502kw at wheels) - this kills it.it would be making more than 500kw with response and power everywhere.  Extremely happy.  They not as pretty as the Precision - but fark me they are amazing!

IMG_20220131_132655.jpg

Edited by IMACUL8
  • Like 5
On 01/04/2022 at 5:18 PM, IMACUL8 said:

Update.

 

Borg Warner EFR 8474

2000CC Bosch Injectors

 

 

Awesome build, and the 8474 is an excellent turbo - a made recently made 620kw @ hubs on his 2JZ with an insane power curve.  If you aren't shy with it then you're going to completely slap the old T76 setup everywhere :)

Always concerns me seeing Bosch 2000s, especially on builds like this.  Hope you don't have any issues - look forward to the final results!

Also are you still running the factory CAS or has that been modified to just only return a home signal?

If that's OEM I would swap it out for a NZ Wiring cam trigger kit, 24 -1 setup but you won't have triggering errors like the OEM optical wheel 

Also brakes wise, look at 355mm 370Z calipers using Z1 Motorsport adaptors. Should be plenty for your car and track work when paired with decent pads.

  • 2 weeks later...
On 4/2/2022 at 7:43 AM, Dose Pipe Sutututu said:

Also are you still running the factory CAS or has that been modified to just only return a home signal?

If that's OEM I would swap it out for a NZ Wiring cam trigger kit, 24 -1 setup but you won't have triggering errors like the OEM optical wheel 

Also brakes wise, look at 355mm 370Z calipers using Z1 Motorsport adaptors. Should be plenty for your car and track work when paired with decent pads.

Yes I believe I am.  CAS and coils will be done when I return the car shortly.  Not sure yet as to what option I will use for each as yet.  Very keen to get it done and push the tune more.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...