Jump to content
SAU Community

Recommended Posts

On 08/11/2021 at 10:01 AM, r32-25t said:

 It German beer is much better then Korean beer 

This I have to agree too, also their sausages are better.

Went to their beer festival a few years ago in Berlin, that was great fun! RSA? yeah nah, here's a pint and a landyard so you don't drop your beer.

 

Fab Brief: must use existing hole, don't want a new hole through the washer bottle like all the other R33 GTS-ts out there. Also minimum pie cuts where possible (I reckon they're ugly).

Result: Pretty damn happy with this 😁

IMG_20211109_123121_967.thumb.jpg.d274f790d1405b213471b9babddf9cdb.jpg

IMG_20211109_123111_542.thumb.jpg.0617144201d6200163d0df9a039a356f.jpg

 

  • Like 4

New hot pipe too, because why not. Also the existing one didn't fit too well as it was made to suit a HDi intercooler which sat a bit more forward when compared to the Plazmaman Pro core.

We haven't discussed cost yet 😅

 

IMG_20211111_161900_859.jpg

IMG_20211111_161910_746.jpg

IMG_20211111_161848_942.jpg

  • Like 3
On 12/11/2021 at 3:35 AM, Piggaz said:

No clamps behind the front bar?

As in the Plazma clamps? Nah normal silicone joiners and hose clamps are fine for me. Only going to run about 2 to 2.2bar of boost.

The TB, had no choice because of the DBW adaptor.

On 11/13/2021 at 4:37 PM, Dose Pipe Sutututu said:

Just confirms how mentally retarded I am throwing more money at it 😐

I think this applies to all of us here 

timmy burch repeating GIF by South Park

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...