Jump to content
SAU Community

Recommended Posts

I said I want to, didn't say I would, but if the car got smashed up badly or something, I'd do it as part of the repair. Plus I'd like to try my hand at it and what better car to f**k up than an old Silvia track care where looks mean SFA anyway. 

Postman was good to me while I was on holiday. Got a steal on all of this. Didn't need the adjustable gears but it was a package deal with the cams which are brand new in box and hard to get now, these are just 256 Poncam drop in. If anyone needs Adjustable gears, I have a brand spanking set of ISC ones here, though I don't think there's many CA users here. 

Rotors are near new project Mu in actual 4 stud 0_0 That's a $500 pair of rotors for $130. Thank you very much. 

 

 

20171211_082443.jpg

20171211_082510.jpg

20171211_082554.jpg

Edited by ActionDan
  • 4 weeks later...

Picked up this bargain over Xmas, oh and some coolant. Just a basic 38mm tial, some new gaskets and a generic screamer.

Will keep all this good stuff for another motor I think, will just repair the fitting priorities track time this year.

20180107_112706.jpg

  • 4 weeks later...

Behold, the beauty of my AUII XR6! Won't bother starting new thread, will be pretty obvious which car is which when updating. 

First event for the Silvia is still months away and as I wanted to get into some dirt action this year, and get my partner involved, I'm going to have a crack at a few motorkhanas, hopefully starting with a tarmac event this weekend as a shaekdown, if I can get the car sorted. 

Lots of dodgy shit on this car but it is RWD, manual, and has a fat exhaust and a pod filter so we're good. 

Missus spent some time cleaning the filthy interior while I toiled away on the other stuff. Car drove home (working AC and cruise!) so it's not "that" bad, but it needs some love. Actually, yes it is that bad.

Done so far: 

  • Removed, repaired, and refitted extractors.
  • Tested, repaired, diagnosed faulty power windows, some switches on the way, but all windows up now at least.
  • Broke one ignition lead removing it to check plugs, plugs were good, replaced all leads with some mint spares, now have 5 left overs...
  • Adjusted Handbrake as best I can.
  • Adjusted clutch pedal height, clutch is firm AF, may get a new cable for it at some point.
  • Tried to fit my silvia rims with old 235 RSR's, no good because Falcon uses 12.7mm (1/2") studs vs 12.5 for Nissan, which will be why you see ford rims on Nissan more often. 
  • Removed multigrips from fuel line... Car has the wrong regulator in it also, car won't run without the multigrips lol, seems to have a fuel pressure issue. Have another rail/reg to try and will put new filter in, if no good, will be pump. 
  • Dropped tyres from the 75psi pressure they had in them to a more reasonable 36 hot...
  • Broke tabs off ignition coil block, just by removing ignition leads from it...
  • Sweated profusely.
  • Swore a lot. 
  • Killed a lot of spiders. 


Still to do, before this weekend!

  • Finish fixing fuel issue. 
  • Fix gearknob, very poorly attached. 
  • Change brake fluid and add some baller brake vents. 
  • Replace oil and oil filter. 
  • Replace brown dam water with coolant. 
  • Finish connecting rest of exhaust. 
  • Reconnect column to rack, had to be removed to get extractors out. 
  • Wash?

Wishlist

  • 2x Race seats and harnesses. 
  • Bulk skids. 
  • Better rims/tyres. 
  • Minimal spend. 

Specs.

  • Pod with carbon intake shroud.
  • Pacemaker extractors into 2.5" exhaust. 
  • EL XR6 Rims with 205 rubber
  • Altezza taillights 
  • High spec leather interior
  • Working fancy kenwood stereo 
  • Clarion speakers all round, 3 work.. 
  • Some hecktik rear body kit and weird spoiler, both rattle canned black. 
  • Badly peeling tint. 
  • Speco pedals
  • Momo gearknob
  • Twin piston brakes, which are shit anyway. 
  • Praying it has LSD, initial burnouts suggest yes. 

20180203_171207.jpg

20180203_200743.jpg

20180203_200944.jpg

20180203_201733.jpg

20180203_225355.jpg

20180204_112201.jpg

27653151_10157055008079838_301175159_o.jpg

27653369_10157055005459838_26836620_o.jpg

27708067_10157055006904838_2017970757_o.jpg

27710288_10157055698254838_8351989315420167099_o.jpg

27746818_10157056357829838_1972120355_o.jpg

27785651_10157056357894838_1976029548_o.jpg

Edited by ActionDan

Wasted another few hours on it last night without success, but think I may be onto something. 

Swapped entire fuel rail out which different reg, no good. 

Swapped in GTR fuel pump, no good. 

Checked fuel filter, looks ok but had the wrong one to swap in. 

Checked diagrams this morning while scratching my head, appears fuel return and delivery lines are backwards into the rail 0_0

Hoping it's just that and I can get on with oil/brake/coolant change. 

Really enjoying the orange gasket shit everywhere... 

 

27744879_10157063121524838_1627348992_o.jpg

Edited by ActionDan

You have no idea how often getting the fuel lines plumbed back to front happens. Has been the cause of 4-5 cars I have seen over time (2 of them being my own after engine swaps haha)

My second AU, first was a Fairmont.

All doors work, all electrics work, once I get 2 new window switch.

Oh is the aerial electric? Maybe that doesn't work.

Front and rear bumoers have been rattle canned and are haggard as f**k lol, but vents are cool.

Ewww even just looking at the suspension or underbody makes me wince.

 

I hope you treat it like the dirty ho-bag it is, and rip some dirt skids like it's 200km north of kalgoolie

Turned the wheel and the other stayed very stationary, so if it's an LSD then it's more S than L lol

Swapped fuel lines around and hey presto, car ran like a champ. 

Rejigged the hot air intake setup, cleaned the filthy filter, will make a divider at some point but other priorities pressing before Saturday shakedown. 

Oil changed and because I have dirty Falcon experience, positioned the pan just right to catch the leaking oil filter. 

Picking up a fuel pump lid screw cap thing and a new seal as the old ones were completely abused and not sealing at all. 

Next up is brake fluid and coolant flushes, well in the case of the coolant replace the dam water with actual coolant.  

Oh and that horrible noise you can hear appears to be the idler and tensioner which is probably original. 
 

20180206_204737.jpg

20180206_212431.jpg

Edited by ActionDan

Well she's pretty much ready. 

  • Did a full brake fluid flush, was filthy. 
  • Did a full coolant flush forwards and back,, themorstate out etc, filthy dam water is gone now.
  • Fitted some brake ducts to try ad help the tiny brakes survive the 37deg weather that's forecast for the event on Saturday. 
  • Fixed gearknob as best I could, will require new shifter and knob. 
  • Ended up having to swap in the GTR pump as the AU one died. 
  • Had a spare can of threebond carbon cleaner, put that through it as well. 
  • Gave it a wash, made no difference, paint is that shit lol

 

20180207_212455.jpg

20180207_212509.jpg

20180207_220204.jpg

20180208_103413.jpg

20180208_115612.jpg

Well that was quite a day lol Had a lot of laughs learning how to captain this vessel. 

Start with the bad, then onto the good - and there was plenty of good :D

The bad/issues.

  • Tyres were just terrible, watch the video to see what I mean. They had a 1-2 lap window at best. I played with pressures which reduced the window but gave me more outright grip in that window. They will be fine for dirt, so they stay. 
  • Power steering fluid spat out all over the extractors, turns out it was massively overfull so that was an easy fix but the bulk smoke that entered the cabin was a little worrying!
  • Clutch pedal stayed on the firewall a few times, car doesn't like being rushed into gear and seemed to only happen when i was heel toe double clutching really fast, so avoiding that was enough - should be fine for dirt as well. 
  • Seat is terrible, you have to hold on for dear life lol Will get 2x race seats and harnesses on the cheap. 
  • Suspension is ridiculously soft, will be great for dirt I think but it struggled on the tarmac.  
  • Diff seems a little tired, you can tell by the way it's pushing/kicking around that it's struggling. In the video you can see it seems to only spin 1 wheel decently when I lose it. Should be OK on dirt, but we'll see if a mini spool is needed. 
  • Can't find where the fuel smell is coming from. 
  • This club mandates a fire extinguisher, had to rush home and grab my spare and some tools. Could only mount it on the trans tunnel as that was the only place my 50mm+ self tapers could reach the floor pan lol Lucky I;m only 10mins away from this track. 

Now the good.

  • Brakes weresurprisingly good, no fade and decent stopping power for what they are, ducts no doubt helped. Having shit tyres also helps keep speeds down.
  • Managed to get a good 2sec off my time over 4 sessions and chopped an SS (to be fair, the dude had only done 3 track days ever but it still counts, 4 seconds... chopped!).
  • Car just kept taking punishment all day, didn't boil coolant, brakes, no obvious heating issues despite 35deg temps and I wasn't kind to it. 
  • AC in the pits was lovely. 
  • Boot is monstrous and fitted ALL my gear including the gazebo lol
  • Steering wheel is actually decent to use. 
  • Car seems surprisingly good on fuel, barely used half a tank of top shelf 91 octane. 
  • Car is just a hoot to drive, exhaust, suspension wallow, vague as gearbox, should be a blast on the dirt. 

Cannot wait for the first dirt event, which is late April. In the meantime there's 2 rounds of the sprint series for me to attend with the Silvia once I fix that coolant line. I wont change anything else aside front tyre pressure as I want to see what those AR-1s can really do. 

My best lap is below, with some bonus footage of me getting it very wrong at the end. I did put 1 wheel off a number of times and gather it up but the tyres were just cooked and I had completely run out of talent lol

 

20180210_071356.jpg.872f153148128ba7b0c4847e0981647b.jpg20180210_084030.jpg.320e612f6bf1aa3469cd6113c25fa645.jpg20180210_111508.jpg.1c1fa2a5945aa119dd63995aced77510.jpg

 



 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...