Jump to content
SAU Community

Recommended Posts

This is some result form an ATR43SS1 Turbo in bush bearing. It made 227rwkws @ 17psi on Pump 98 fuel. I've used the same turbo with BB core on my R34.2  with an RB20det (running with melted cyc 6) which is very responsive.

rb20det225rwkw.jpg

rb20det225rwkwboost.jpg

 

Green boost curve: Same turbo with BB's core. 

15589628_10154306680648865_5979545858977

About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758.

Third pic isn't loading for me either btw

  • Like 1
19 hours ago, hypergear said:

 

Green boost curve: Same turbo with BB's core. 

 

So around 900rpm improvement in response from BB core??

Is that a typical result??? seems like a lot

*Sorry, should be in hypergear thread

 

On topic, can't wait to hear it with that manifold! Would like to change the manifold on mine, but cant pull the trigger cost wise, just for the noise. If I could justify a jump in performance aswell, I could maybe do it, haha

18 hours ago, iruvyouskyrine said:

About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758.

Third pic isn't loading for me either btw

Hitting 15psi by 4000rpm (picked that because the curve to 17psi rolls over a little presumably because of boost control so saying full boost at 4700rpm makes it sound much worse than it is) and making 227kw @ hubs, which is a healthy result - but to be honest, it may be my 16G fanboism coming out but I feel that one of those would happily do that power on 98 too, but with significantly better response.   His ball bearing equivalent shows 18psi by 4000rpm, which is more like what I'd expect from the 16G but of course DBB also offers transient response improvements (the old "Dyno doesn't show it" stuff) so that sounds a bit like it'd be quite a nice turbo on an RB20, especially if it's not expensive.

Either way, neither turbo are twin scroll - let alone EFRs, so probably a bit off topic here.

Edited by Lithium
About 2 months too slow Tao, I asked if you were going to continue with testing on RB20 and you said it was too much hassle for little gain with all the problems you were having. Ended up going with an EFR6758.

Third pic isn't loading for me either btw

Might be 6 years too late. The date on that graph says 2011, lol.
8 hours ago, admS15 said:


Might be 6 years too late. The date on that graph says 2011, lol.

:D yes thats when they were first developed.The turbo is ATR28SS15 based, it maxed out at 281rwkws P98 fuel on an worked SR20det, on a stock cammed Rb20det it should be maxing some where towards the 250rwkws depending on mods. 

I bought a R32 GTS4 late last year and trailed a bunch of other wheel and housing combinations and that is still the best one, BB improved transit response and made the turbo came in with very light throttle movement. Unfortunately I've picked up a bad car, its unfit for the building purpose, I might get another one to continue this venture when I see something come up decent. 

 

Keen to hear more about the intake manifold and any dramas fitting it up.

I've got a complete RB26 intake, throttles etc and adapter plate sitting here waiting to go, just need an RB30 thermostat housing.
It will be replacing my current FF manifold so I'm hoping not too many gotchas.

Keen to hear more about the intake manifold and any dramas fitting it up.

I've got a complete RB26 intake, throttles etc and adapter plate sitting here waiting to go, just need an RB30 thermostat housing.
It will be replacing my current FF manifold so I'm hoping not too many gotchas.


I'm using the otaku garage adapter on mine. They fit fine on RB25 but on RB20 there is only a bees dick of clearance to the Thermostat housing. You actually have to scallop the coolant rail that runs under the 26 manifold to make it fit, and even then doing that will be a tight fit.

I have some pics of it but they are on my computer, will post them up here when I get a chance
#twinscrollislife 
You planning to ceramic coat or wrap that manifold? 

Neither, it's far too beautiful for that! It should go purple and gold being the hypertune 347ss. If it starts to fade or look shitty after a couple of years I will ceramic coat in titanium.

Nope wasn't me, I live in the land of the harshest vehicle laws in the world (aka straya)

I'm yet to try it as I have been away from the car for 4 weeks but will be getting stuck into it when I get home. I will keep this thread updated for you to follow [emoji106]

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...