Jump to content
SAU Community

Recommended Posts

They don't seem to be included in last week's compulsory recall. https://www.productsafety.gov.au/recalls/compulsory-takata-airbag-recall/takata-airbag-recalls-list#id12

I'm not aware if Nissan issued a previous voluntary recall, but go here and run your VIN to check: http://www.nissan.com.au/owners/owner-information/takata-airbag-recall

  • Like 2
1 hour ago, alex182 said:

They don't seem to be included in last week's compulsory recall. https://www.productsafety.gov.au/recalls/compulsory-takata-airbag-recall/takata-airbag-recalls-list#id12

I'm not aware if Nissan issued a previous voluntary recall, but go here and run your VIN to check: http://www.nissan.com.au/owners/owner-information/takata-airbag-recall

Good info! 

  • Like 1
  • 7 months later...

Hi guys, I just saw a recent episode of 60 Minutes about Takata's exploding airbags so jumped on the IMABS website to see if our cars are affected and got the below message advising that it's unrecognised our their database possibly because it's an import so I rang Nissan and after a few transfers got to a public relations department and they couldn't advise definitively if our cars are affected or not because it's an older grey import. 

I don't know. I'm a bit concerned and was wondering if anyone has had any luck in finding out further details?

Thanks.

image.thumb.png.aff21c47d4ad66abaf1e36f834913134.png

59 minutes ago, Robocop2310 said:

Thanks guys.

I have a 1996 R33 GTR and 1999 R34 GTR.

Anyone with similar care having got the all clear? I have rung Nissan several times and they have not been forthcoming.

If your car is an import Nissan Australia won't give a shit. That's how it works.

2 hours ago, Old Rev Head said:

I have a 96 R33 twin airbag, rang Nissan Australia and spoke to customer relations. Gave them the Aussie VIN and Nissan original chassis number and got the all clear on that one.

 

9 minutes ago, Ben C34 said:

If your car is an import Nissan Australia won't give a shit. That's how it works.

Old Rev Head seems to have had some luck.

1 hour ago, Ben C34 said:

Aussie vin. I take that as being an Aus delivered car in which case they do care.

Car was imported to Australia 15 years ago by my father, and was first registered here 3 months ago, (don;t ask that's for another time). The 6U number is stamped into the body by the RAWS when it gets to Aus to comply with A.D.R. laws.

Can SAU write to Nissan as a club or try contacting them as I don’t know about others, but I hate uncertainty and I’ve tried contacting them and as some have corrected said they don’t give a damn about grey imports. 

Like most, I don’t want to lose an eye or have half my face mangles by an airbag that’s suoopsss to safe lives. 

It took half a minute to find this info:

http://www.ironchefimports.com/2017/07/24/takata-airbag-recall-for-dummies/

which leads to:

http://www.nissan.co.jp/RECALL/search.html

Search. Confirm. Relax (or freak out depending on the results)

 

  • Like 3
  • Thanks 1
2 hours ago, GTofuS-T said:

It took half a minute to find this info:

http://www.ironchefimports.com/2017/07/24/takata-airbag-recall-for-dummies/

which leads to:

http://www.nissan.co.jp/RECALL/search.html

Search. Confirm. Relax (or freak out depending on the results)

 

I'll make this an easy-to-find link on the site. Thanks for posting.

  • Like 1
5 hours ago, Dose Pipe Sutututu said:

simply just too old

has any ever had their 90's era car air-bag go off? wondering if they even work at all

 

Edit: I've hit a few kangaroos and never set anything off, but not sure how much of an impact is required.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...