Jump to content
SAU Community

Recommended Posts

10 hours ago, Piggaz said:

-5’s are too BIG for a 2.6. My god they’re a heap of shit to drive on a 2.6. Again, have you driven that setup? You’d be pumped to the moon and back by a euro hatchback.

I wouldn’t piss on those new journal bearing shitheaps from HKS. Waste of time.

You may be only looking at where they “fall off”... but how they drive and how the come on is chalk and cheese.

The GTR is a big, heavy heap of shit with tall gearing with the 5 speed and can’t be helped by any “smarts” in the engine bay (like VCT). It’s a small stroke, low comp donk with a dumb head. It needs all the help it can get to push around that pork!

It’s ok, I own one, have had for 15 years. But to own one with a 2.6 is a no go for the above reasons.

hahaha i really need to drive a single turbo 2.6 to see what its like.   I have a 400kw R32 with -5's and although i know they are laggy i dont find it a pig.  I suppose you dont know what you dont know right :P 

 

11 hours ago, Piggaz said:

-5’s are too BIG for a 2.6. My god they’re a heap of shit to drive on a 2.6. Again, have you driven that setup? You’d be pumped to the moon and back by a euro hatchback.

I wouldn’t piss on those new journal bearing shitheaps from HKS. Waste of time.

You may be only looking at where they “fall off”... but how they drive and how the come on is chalk and cheese.

The GTR is a big, heavy heap of shit with tall gearing with the 5 speed and can’t be helped by any “smarts” in the engine bay (like VCT). It’s a small stroke, low comp donk with a dumb head. It needs all the help it can get to push around that pork!

It’s ok, I own one, have had for 15 years. But to own one with a 2.6 is a no go for the above reasons.

I flipped it backwards, -5s are too big, correct. But GT3-SS turbos are tiny, 0.54 a/r exhaust turbine which is tighter than any other turbo out there. They nose over hard on 2.6, so the concern is that a 2.8 will just shift everything down a few hundred RPM and make the engine feel like a Mazda 2.5T where the power falls off a cliff well before redline.

The HKS turbos may be a waste of time/money but it's already too late, the turbos are bought for and installed so I'm just going to see how they go. The engine isn't at the point where the bottom end is going to be taken apart yet so it's going to just be a 2.6 for now. I have a VCAM step 1 sitting in the garage so that can be a first attempt to try and get the VE up earlier to spool the turbos. If that doesn't get the desired powerband then I'll think about a stroker or RB26/30.

I'll post dyno charts and data logs as I work through this, if it sucks you guys can have some fun pointing and laughing.

2 hours ago, Stixbnr32 said:

hahaha i really need to drive a single turbo 2.6 to see what its like.   I have a 400kw R32 with -5's and although i know they are laggy i dont find it a pig.  I suppose you dont know what you dont know right :P 

 

You going to gtr fest on the weekend?

I must say my car back when it ran was a laggy bucket of shit on the -5's but at the same time goddam it was fun once the boost kicks in!!

This is a weird statement to a degree but the better a turbo setup is, the worse it feels!!  What I mean by that is a smooth power curve from low down in the rev range doesn't have anywhere near the wow factor of a laggy turbo when it hits it's happy zone.  The better sorted car will be a waaaaaay better and quicker car (until high in the rev range anyway) to drive but it just doesn't have that raw "Holy f#$k hang on boys she's off" kind of feeling!  I drive a lot of the modern turbo cars that would be way faster than my car but they're boring AF compared to a laggy turbo coming on song!

54 minutes ago, Shoota_77 said:

This is a weird statement to a degree but the better a turbo setup is, the worse it feels!! 

Traction is the other thing though. When you have a knife edge boost response at higher rpm, the sudden transition to torque and power is more prone to make the tyres break. It is so much better to be applying torque to the road at lower rpm and gaining speed, Makes them tend to stay stuck to the road for longer. Not to mention it is more modulatable.

My thoughts are this, and I’m still torn here. But 

you wouldn’t get a Hakosuka GTR and pull the engine out (it has been described as the laggiest NA motor ever produced) and drop an SR20 into it, then say, it drives much better. 
this would probably be true, but you’d be missing the point. 
Now, I’m not saying our cars are at that same level, but I believe they are going in that direction. So I’d like to try to get my car when I want it, while it is still somewhat affordable (should have done it a couple of years ago) lol 

At this point, I’m even considering putting a getrag in it, over a sequential. 
but we’ll see where things go. 
As Piggaz said, they are a big heavy bucket of shit! 
but isn’t that why we love them, Clarkson said, it’s the flaws and imperfections in a car that we bond to. If it was perfect, it would be boring. 

Performance wise, bigger is always better. More torque, easier power.

But I was told by my engine builders that the 30 blocks are not as good for circuit work. Something to do with the harmonics I think? Anyone heard similar?

Therefore I built a 2.6 and didn't go stroker mostly due to cost, as I wanted to keep it simple and reliable as possible on the track. Probably should have gone a 2.8, but I wouldn't have been able to help myself, and I would have gone bigger turbo, sequential etc etc

13 minutes ago, Darmanin10 said:

30 blocks are not as good for circuit work. Something to do with the harmonics I think? Anyone heard similar?

It's not really the block, at least wrt the harmonic issue. The 30 block is certainly not as good as the 26 (typically, on average, there are always examples at each end of the bell curve) simply because it is taller. The squatter shape of the 26 block makes it stronger in a few places where it counts.

The harminic issue is in the crank. This can be minimised with a billet crank and upgraded balancer, as well as careful tolerancing etc etc. Every last detail helps kinda thing.

25 minutes ago, Piggaz said:

Isnt your car pushing water with a busted head gasket?

Just top it up and off you go again, has a VW or Audi feel to it. Every time you fill up your fuel, top up your oil & water 🤣

  • Haha 3
3 hours ago, Piggaz said:

Isnt your car pushing water with a busted head gasket?

Yep

 

3 hours ago, Dose Pipe Sutututu said:

Just top it up and off you go again, has a VW or Audi feel to it. Every time you fill up your fuel, top up your oil & water 🤣

Just been doing this, taking it to gtr fest on the weekend and then parts I’m replacing start coming off 

  • Like 3
6 hours ago, r32-25t said:

Yep

 

Just been doing this, taking it to gtr fest on the weekend and then parts I’m replacing start coming off 

See ya there mate 

 

also recently tossing up going 3L

we went 2.8 high comp shit load of head work and couldn’t be happier 

 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...