Jump to content
SAU Community

Recommended Posts

I am currently based in Japan, own an R34 and am considering getting a second car as the R34 is just not so ideal as a daily. Eventually, say 2-3 years ahead, I will return to the UK. As it turns out, I can import my posessions - cars included - to the UK, tax free. So I'm considering taking advantage of this as best I can whilst also satisying the need to have another car in Japan and the UK in future. I need to consider the following:

A max budget of around GBP 15k (28k AUD, 20k USD), ideally it would be less than this, even half as much would be better. 

Economic benefits are of a high consideration, along with practicality. I either want it to last forever or be able to sell it 5 years later with little to no loss (better yet, at a profit).

I'm open to any type of car, SUV, Sports car, Kei car, Sedan.

I have been looking at everything from Jimnys, Pajero Minis, GT86s, Toyota FJ Cruisers/Land Cruisers, Honda Z600 (although, it's likely to be outright dangerous driving a kei in europe), to Toyota Chasers (in poverty spec 2.0l AT). Alot of these for one reason or another I can't really justify, whether it be too dangerous in the EU, worthless or impossible to get parts. On cars like the GT86 there is a mild discount vs UK prices at current rates - say 10% after shipping. Typically the cars here are in better condition vs the UK.

So the question is, what would you buy in this situation? Please do not suggest another Skyline.

Another skyline. Hands down. 

:rofl:

 

If it were me, given your requirements and maybe also the ease of maintenance in another country, I'd have to go with a chaser. In whatever trim you can afford. Or, a Toyota Celsior (Lexus lx400) as they are really starting to gain in appreciation. 

 

The perfect weekly/daily combo I reckon.

  • Like 1
On 12/24/2021 at 7:55 AM, GTSBoy said:

Note I did not read the OP at all.

I still say FD.

Hahaha, literally the least practical of them all. If only this were a viable option.

 

On 12/23/2021 at 5:44 PM, PranK said:

Another skyline. Hands down. 

:rofl:

 

If it were me, given your requirements and maybe also the ease of maintenance in another country, I'd have to go with a chaser. In whatever trim you can afford. Or, a Toyota Celsior (Lexus lx400) as they are really starting to gain in appreciation. 

 

The perfect weekly/daily combo I reckon.

I am seriously evaluating this. Not a Chaser as they're too expensive for my requirements but the closely related Mark II is still cheap in poverty spec. The Celsior is a very good shout - cheers - I've been looking at Crowns until now.

LS400/1st gen Celsiors are getting too old to really be a useful daily if the car needs any kind of serious repair/restoration whatsoever. If you find a cherry example they're ridiculously reliable for what they are and I still daily mine but I don't drive very much and it's hard to justify buying a new car when it's still reasonably safe as far as crash safety is concerned and even if I do care about the environment I drive it so little that the breakeven point on emissions is easily 10 years away.

Also if it were my money I would only get the VVTi revision cars. They are actually simpler than the original 1UZ-FE as they delete the EGR pipe that is a royal pain to repair if it ever starts leaking and they get rid of the distributor ignition system with the spark plug wires going all over the place. They also have a higher precision 36-2 crank trigger and 3 tooth cam trigger. They also get DBW to eliminate all the idle/cruise control/traction control bits that clutter up the engine bay in the older models. It's harder to build the VVTi engines for power because there's more going on in the ECU tune but I don't think it's really worth it anyways considering that the only mod that makes power without going to forced induction is some exhaust headers to replace the OEM log headers. That's maybe 20 hp tops.

On 24/12/2021 at 3:44 PM, Robzilla32 said:

This or MR2 4A-GZE. Coz cool and even less practical

I had a AW11, t'was awesomeballs, not functional, had snap oversteer, but awesomeballs none the less

  • Like 1
On 24/12/2021 at 5:17 PM, mlr said:

I had a AW11, t'was awesomeballs, not functional, had snap oversteer, but awesomeballs none the less

My 2nd car. The car dealer asked me to pull over during test drive. He was white as a sheet. Fun times

  • Haha 2
On 12/24/2021 at 3:16 PM, joshuaho96 said:

LS400/1st gen Celsiors are getting too old to really be a useful daily if the car needs any kind of serious repair/restoration whatsoever. If you find a cherry example they're ridiculously reliable for what they are and I still daily mine but I don't drive very much and it's hard to justify buying a new car when it's still reasonably safe as far as crash safety is concerned and even if I do care about the environment I drive it so little that the breakeven point on emissions is easily 10 years away.

Also if it were my money I would only get the VVTi revision cars. They are actually simpler than the original 1UZ-FE as they delete the EGR pipe that is a royal pain to repair if it ever starts leaking and they get rid of the distributor ignition system with the spark plug wires going all over the place. They also have a higher precision 36-2 crank trigger and 3 tooth cam trigger. They also get DBW to eliminate all the idle/cruise control/traction control bits that clutter up the engine bay in the older models. It's harder to build the VVTi engines for power because there's more going on in the ECU tune but I don't think it's really worth it anyways considering that the only mod that makes power without going to forced induction is some exhaust headers to replace the OEM log headers. That's maybe 20 hp tops.

The first gen ones seem to be fairly rare over here too, the second gen are plentiful and cheap-ish. Fuel economy will be horrendous - especially costs on the U.K. side; I’m not considering this a dealbreaker. Better yet, the car could double as a carrier of a donor engine for the R34 in future - just a thought. 

On 12/24/2021 at 1:44 PM, Robzilla32 said:

This or MR2 4A-GZE. Coz cool and even less practical

Really want one. Not sure there’s a benefit getting one in Japan over the U.K. though. 

On 12/24/2021 at 1:05 PM, mlr said:

Some Kei car

So dangerous at non-Japanese road speeds. Maybe a Honda Z as the novelty factor outweighs the risk of death.

  • 3 weeks later...

the old toyota hilux wouldnt be a bad unit. nice little turbo diesel 4 door with a 5 speed and your good to go mate.

 

 

This was my old rig from high school haha wasn’t a 4 door but I would tickle the tongue of skunk to have another one like it, it was tons of fun mate. Reliable too

1BC34700-CE46-440C-AF59-9A68F4ACC316.jpeg

  • Like 1
On 1/11/2022 at 5:45 AM, MoMnDadGTR said:

the old toyota hilux wouldnt be a bad unit. nice little turbo diesel 4 door with a 5 speed and your good to go mate.

 

On 1/11/2022 at 5:49 AM, MoMnDadGTR said:

This was my old rig from high school haha wasn’t a 4 door but I would tickle the tongue of skunk to have another one like it, it was tons of fun mate. Reliable too

That's badass. Nice rig you had there. I've browsed the market for the old 4x4 Toyotas and they're all looking pretty overpriced, a two door wouldnt be ideal for me tbh.

I am now considering a 2005-ish Mitsubishi Pajero, the large one, as they're pretty cheap for a low kms model - running costs are exceedingly high here. I worked out I'm at 12k GBP (16k USD) (ex fuel and maintenance) in cost using one of these for two years and then exporting to the UK, vs using a rental kei car frequently for the next two years which is 2-3k GBP. The question then is, what can I get in the UK for 9k GBP (+ two years of market returns)... 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...