Jump to content
SAU Community

Recommended Posts

Heya folks, 

Just got home from a drive and my turbos decided to shit themselves.

I actually had it up on the market but now it looks like that's being put on hold till the issue is fixed. :(

 

The car is in amazing condition and I don't want to do any big single upgrades or anything like that. Since I'm pulling them out may as well put something a little better in there.

 

Any recommendations on some decent twins that aren't going to break the bank?

 

I don't want to have to change the manifold or anything like that so it would have to be something that bolts straight in. 

 

Thanks in advance! 

Link to comment
https://www.sau.com.au/forums/topic/483574-twin-turbo-upgrade-r33-gtr/
Share on other sites

On 20/04/2022 at 3:11 PM, robbo_rb180 said:

Either rebuild what you have by @hypergear, find a second hand set or 2860-9 upgrade.



 

Exactly. 2nd is quicker to do and might cost a little more, and you will get 20% more whoosh.

You'd be mad to convert a GTR from twins to single these days unless it is for genuine race only use

https://gcg.com.au/turbo-charger-kit-nissan-rb26-low-mount-iwg-gt2860r-9-xtr000908i.html?ref_cat_id=Turbo-Upgrades-Kits-Petrol-Turbocharger-Kits

 

This what you boys mean by the -9s?

Also, while we're here - since they're blown and the car is sounding like a hilux, does this mean I shouldn't be turning it on at all and tow, or is it ok to not hit boost and drive it to the workshop? 

Edited by Mlads33
On 4/19/2022 at 10:48 PM, Mlads33 said:

https://gcg.com.au/turbo-charger-kit-nissan-rb26-low-mount-iwg-gt2860r-9-xtr000908i.html?ref_cat_id=Turbo-Upgrades-Kits-Petrol-Turbocharger-Kits

 

This what you boys mean by the -9s?

Also, while we're here - since they're blown and the car is sounding like a hilux, does this mean I shouldn't be turning it on at all and tow, or is it ok to not hit boost and drive it to the workshop? 

I wouldn't allow the engine to turn until you've verified that you haven't gotten a bunch of ceramic bits from the turbine going backwards from exhaust gas reversion. Letting off at high rpm you can see the manifold pressure reach high levels of vacuum.

Edited by joshuaho96

Yes, those. That kit includes the slightly different oil drain fitting you need.

And no, don't run or drive it. Depending what has happened exactly there could be crap all through your oil. Also, it is worth having someone check it out and make sure turbos are the only issue, they don't generally die on their own and there is a chance they can do other damage

On 20/4/2022 at 3:34 PM, Duncan said:

Exactly. 2nd is quicker to do and might cost a little more, and you will get 20% more whoosh.

You'd be mad to convert a GTR from twins to single these days unless it is for genuine race only use

Why?

can always put the shit lag wagon twins back on. 

A weekend in the garage and it’s “as it was as Nissan intended” or some other dribble that GTR guys love to froth over. 

As Brett said, -7’s/-9’s or if you want a bit more poke a set of -5’s. The as it’s been for the last 20 years.

  • Haha 1

It's not 2010 anymore mate, the world has moved on. An R series GTR is no longer for making big power out of, breaking parts that can no longer being replaced, leaving in the garage for years, then repeat.

It is for keeping standard as possible, putting genuine nismo accessories and maybe some period rays wheels on, and shipping to the US when you win GTR lotto.

People don't have to like change but it happens anyway. Ask anyone who wanted to own a GT Falcon or even a Torana in the last 20 years.

  • Like 2

Since the turbos are coming off, might as well pull out the motor for ease and at the same time add in a head drain/sump breather, Nitto oil pump, extended baffled & gated sump, fresh bearings, ARP stuff top to bottom, Nitto OR Tomei head gasket, all fresh seals.

If money permits, a Samsonas too.

Who the f**k pulls the engine out to change turbos? I can have a set of turbos out of a gtr in about 2hrs,

better ring maatouks, crd, jem and etc and let them know what GTRs are for now because they’re building more then ever and finished examples are fetching huge money 

  • Like 1
On 4/20/2022 at 5:07 PM, r32-25t said:

Who the f**k pulls the engine out to change turbos? I can have a set of turbos out of a gtr in about 2hrs,

better ring maatouks, crd, jem and etc and let them know what GTRs are for now because they’re building more then ever and finished examples are fetching huge money 

A lot of workshops I talk to don't even do intake plenum/collector with the engine in the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...