Jump to content
SAU Community

Recommended Posts

Just put a deposit down on a new 400Z. Won’t be here till later this year. Technically it will be the wife’s car, but think I’m going to enjoy it more! 
Plus, I get another car to modify 😁

Ordered one in gun metallic grey, with the 9speed duel clutch box 

5312495F-FA2A-4123-B435-EFEA4033B921.jpeg

  • Like 7
Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/
Share on other sites

On 14/5/2022 at 11:09 PM, Kinkstaah said:

You know it's a slushbox right? Not a DCT?

That said it's probably a pretty decent gearbox for performance use, being a 2023 car and 9 speed 😛

Well you are correct, my mistake for listening to a salesman, did some research, looks like they are using the 9G-Tronic gearbox from Mercedes. That’s a little disappointing, but looks like it’s a good box, from what I could find there is a versions that uses clutch packs and a version that has a torque converter. Couldn’t find any information on what one the 400 is using.

The dealership will have a demonstrator in a month or so, so will be going back to see it in the flesh and take one for a drive before final commitment. 
@Dose Pipe Sutututu please don’t put those ideas in my head! Lol 

I already have enough hair falling out, another RB build and I’ll be completely bald! 😂😂

  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965377
Share on other sites

On 14/05/2022 at 11:09 PM, Kinkstaah said:

You know it's a slushbox right? Not a DCT?

That said it's probably a pretty decent gearbox for performance use, being a 2023 car and 9 speed 😛

Doesn't the Supra use a slushbox?

The new "slushboxs" aren't the lazy old things like they once were from what I've seen, and they seem to work fine, both in performance and reliability/strength wise

I am happy to be schooled on this

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965383
Share on other sites

On 15/05/2022 at 10:05 AM, Ben C34 said:

New 9 speeds autos are awesome. I would take one over dct anyway.

Yep me too, DCT/DSGs are so 2012. ZF slushie boxes are shifting at 150ms and don't suffer from low speed knocks, bumps, roll backs etc.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965395
Share on other sites

Btw I am all for a decent 9 speed auto, they all lock in gears now and don't slip like the slushboxes of old. As a result they don't feel slushy either.

I'm just saying it's not going to be a race cracking DCT sending shockwaves through the car like it's a GT3 car. Which isn't what you don't want anyway, probably.

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965404
Share on other sites

The 9G-Tronic doesn't shift lightning fast or anything like that. All modern automatics lock up after something like 9 mph as long as you aren't shifting gears for fuel efficiency reasons. To make it "more direct" some will also lock the torque converter even on decel if it thinks you want engine braking but as far as I can tell most still unlock the TC on decel to reduce drag. If you already have a manual car and you just want something that is less annoying in traffic then it should be fine.

US press embargo lifts about 24 hours from this post, I'm curious to see if SavageGeese likes this one any better than the 370Z which was dumped on by a number of reviewers for a rubbery feel in the controls and other issues.

Edited by joshuaho96
  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965405
Share on other sites

Hope this part is not true:

 

"However, the interior was cramped—surprisingly so for someone like myself with my five-foot-nine stature. I must’ve had an inch of headroom at best. During the track portion of the press drive where it was compulsory to wear a helmet, I had to wedge my head under the roof to even fit in the car. Even without a brain bucket, I still felt a bit squeezed inside of the cockpit."

Taken from:

https://www.msn.com/en-au/motoring/news/nissan-s-2023-z-proves-that-design-and-history-overshadow-engineering/ar-AAXkyXh?ocid=msedgdhp&pc=U531&cvid=b1885017228f4a8bbccd331787e66ce0

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965448
Share on other sites

On 5/17/2022 at 9:21 AM, tridentt150v said:

Hope this part is not true:

 

"However, the interior was cramped—surprisingly so for someone like myself with my five-foot-nine stature. I must’ve had an inch of headroom at best. During the track portion of the press drive where it was compulsory to wear a helmet, I had to wedge my head under the roof to even fit in the car. Even without a brain bucket, I still felt a bit squeezed inside of the cockpit."

Taken from:

https://www.msn.com/en-au/motoring/news/nissan-s-2023-z-proves-that-design-and-history-overshadow-engineering/ar-AAXkyXh?ocid=msedgdhp&pc=U531&cvid=b1885017228f4a8bbccd331787e66ce0

The 370z is the same anyone over 6 foot struggles in mine. Headroom is minimal for them.

The big difference with the interior is the new dash cluster and touch screen. Door cards, switches and centre consoleand A/c controls are from the early pre 2014 Z.
 

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965449
Share on other sites

That's the one thing that sold me on my R33, head room and eye level vision out the front screen was very good.

I've sat in other vehicles where you have to permanently shrug your shoulders and your eye level vision takes in half the roof lining.

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965458
Share on other sites

On 17/05/2022 at 4:40 PM, tridentt150v said:

That's the one thing that sold me on my R33, head room and eye level vision out the front screen was very good.

I've sat in other vehicles where you have to permanently shrug your shoulders and your eye level vision takes in half the roof lining.

R32 for example.

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965461
Share on other sites

On 5/17/2022 at 4:07 PM, BK said:

R32 for example.

I'm not sure I follow. I'm 197cm tall and don't have to do anything special to see out of my R32. My head is only mm away from the headlining, sufficient to have a dirty mark there, and I can see under the windscreen rail just fine.

GTR seats are even better than GTSt in that respect (and I'm in GTSt seats, for clarity).

I've just dropped in some Brides on normal baseplate mounts (not the superlows) and put in a little extra effort to make sure that they went in as low as possible (done by omitting some spacers and shortening some fasteners to prevent hitting the bucket) and am now sitting slightly lower than stock seats. Am perfectly happy and wouldn't want to upset the leg position/angle to the pedals etc any more than that anyway.

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965463
Share on other sites

On 17/05/2022 at 5:43 PM, GTSBoy said:

I'm not sure I follow. I'm 197cm tall and don't have to do anything special to see out of my R32. My head is only mm away from the headlining, sufficient to have a dirty mark there, and I can see under the windscreen rail just fine.

GTR seats are even better than GTSt in that respect (and I'm in GTSt seats, for clarity).

I've just dropped in some Brides on normal baseplate mounts (not the superlows) and put in a little extra effort to make sure that they went in as low as possible (done by omitting some spacers and shortening some fasteners to prevent hitting the bucket) and am now sitting slightly lower than stock seats. Am perfectly happy and wouldn't want to upset the leg position/angle to the pedals etc any more than that anyway.

What Bride seat ?

I'm about 194cm. I have Bride Brix 2 seats on Bride MO superlow rails in the blue 32 GTR which substantially drop the height from normal, and the 32 sucks badly compared to my 33 - I have the seat all the way back too.

I do have a 6 point cage which complicates things further and using a helmet is a fricken nightmare compared to the 33, even before the cage went in the 32.

I'm removing the Bride seats as I hate them.

Link to comment
https://www.sau.com.au/forums/topic/483644-new-car-400z/#findComment-7965466
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...