Jump to content
SAU Community

Recommended Posts

Liberty make transmissions for RB 25/26. basic unit is rated for 1500hp and next one up is 3000hp. Come in 3,4,5 speed and unlimited ratios. Clutchless. Prices are in USD but still seem way cheaper then any sequential. These things seem to be just about unbearable. Why isn’t any one using one in a GTR?
 

 

15 hours ago, khezz said:

Liberty make transmissions for RB 25/26. basic unit is rated for 1500hp and next one up is 3000hp. Come in 3,4,5 speed and unlimited ratios. Clutchless. Prices are in USD but still seem way cheaper then any sequential. These things seem to be just about unbearable. Why isn’t any one using one in a GTR?
 

 

Supposedly those are drag-only and can only be shifted up. To go back down a gear requires going into neutral to reset the shifter then trying to rev-match your way into the desired gear.

  • Like 1

Well I’ve sent them a message asking if the transmissions in question are streetable and what’s involved in fitting one. We will se what happens. I’m still surprised that none of the dedicated drag cars run them if they are a proven product in much much faster cars. 

  • Like 1

Surprised this hasn't been mentioned, they pop out of gear if you let go of the shifter. So yeah, hand off the shifter and your back in neutral. 

So no, not a streetable gearbox for this reason and all the other reasons listed above. 

With the way people have to fight the steering wheel in these cars to keep them straight, I’d hate to be having to do that with one hand because of not wanting to end up in neutral if I use both 

also if you miss a shift, it’s a rebuild and you need to cut a big portion of the floor out to get everything to fit 

  • Like 1
On 19/03/2023 at 9:16 PM, GTSBoy said:

It's totally streetable. It's just that the streets are pretty short and have lots of concrete barriers, lights and a return road.

So applicable... if you live life [drive?] a quarter mile at a time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...