-
Posts
819 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by Blackkers
-
Selling man really? wait I think i've seen this for sale a couple of times over the years
- 29 replies
-
can someone please explain the location of the AFM in that R31? It's doing my head in
-
Need trap speed to confirm a result like that
-
it's a VE map so do you have a MAP sensor installed? There's an onboard MAP sensor that you can run a vac line to edit: also don't forget to tune the injector latency
-
with 272 cams and a 6466 on a 2.6L i'd be surprised if it comes on before 5k RPM but I have nothing really to base that on. Hopefully someone can weigh in. edit: it would be and absolute weapon on boost though
-
r34 hypergear highflow would be a good option
-
Turbo Install, Cut Fuel Or Ignition?
Blackkers replied to re34perGTT's topic in Forced Induction Performance
No one has ever killed a turbo with oil starvation at first start up. If that actually happened it would have been a DOA turbo anyway. When you do an oil change and fit a dry filter the whole engine runs with no oil pressure for 4-6 seconds -
SR22VET - awesome. What cams will you be running?
-
Agreed. I had 100% duty cycle at 250ish kw
-
R33 Hypergear Highflow - What Boost To Run?
Blackkers replied to ausdrift's topic in Forced Induction Performance
many of us have been in this situation before -
Educated Guess At The Final Tune Results
Blackkers replied to Nismo 3.2ish's topic in RB30 conversions
suspension will also help keep it in a straight line. Too much oversteer? go a bit harder on the front shocks. My R32 responds really well to minor changes -
ARP headstuds are never a bad idea but probably not needed for your goals no need to remove the head to change them out though
-
Rb25det Idle Rev Move Up And Down :(
Blackkers replied to perzn_34's topic in Forced Induction Performance
While it's idling you can spray some throttle body cleaner or degreaser or wd40 on the suspect areas and listen to the idle. It just helps to rule out things like gaskets which are hard to visually diagnose -
R33 Hypergear Highflow - What Boost To Run?
Blackkers replied to ausdrift's topic in Forced Induction Performance
awesome. and apparently they've added flex fuel to a few models too -
R33 Hypergear Highflow - What Boost To Run?
Blackkers replied to ausdrift's topic in Forced Induction Performance
nistune is fine if you use a Z32 or R32 ecu and is probably cheaper than a PFC if you're looking 2nd hand beware with the R32 ECU you will need an external switch for VCT as the R32 RB20det and RB25de didn't have VCT -
R33 Hypergear Highflow - What Boost To Run?
Blackkers replied to ausdrift's topic in Forced Induction Performance
I ran that turbo on the standard ecu until I had it tuned. It ran like shit on 10psi with an r32 actuator so I fitted the standard actuator and it was fine. Not great to drive though -
Fair enough. Gate spring don't go lower than 15ish psi as you generally want stiffer and closer to your boost target for better boost control. Only downside is you can't go lower
-
hard to say. with the .63 rear you will have to run more boost to make those numbers. maybe I'm wrong but 19-20 psi on petrol should ballpark in the 280kw region. If that's what you want to achieve
-
Custom Steam Pipe Top Mount Manifold
Blackkers replied to xntrq's topic in Forced Induction Performance
I wanted ETM but apparently they're not in business anymore -
Will These 750cc Dw Injectors Fit My Rb26
Blackkers replied to KerrodR33's topic in Forced Induction Performance
yup they will fit. measure resistance and come back to me