Guilt-Toy

how did you go ?

does anyone know how to fix these? i need to replace the box for it thats in the boot as mine is broken, but unsure what to replace it with.

just the usual fmic injectors, fuel system, a turbo to support the power that you need. have got 375rwkw from standard rb25det and manifolds before.

the standard intake manifold will make the power goal you need, so will the standard exhaust manifold. Just get a bolt on turbo like what I have for sale atm, install injectors and fuel pump and fmic. FFP is not going gain you any power.

You really need to buy a aftermarket ecu for this car. Adaptronic modular ecu can do the awd and the vct. I would not bother with the stagea ecu and the hassle you need to get it to run properly.

Will sell for $800 No surge issues, it was on my friends car and he wrote it off, I sold my old r33 before i was able to fit it and its just been sitting there. can post

i got one of those tools, best tool ever

I found a set at Skyline parts in wetheril park

have one in newcastle nsw $50

buy a rear housing off ebay, try the .64 housing

a guy i know has used the same cometic head gasket over 4 different motors.

few ways to do it, tune it properly on 98, then drain the tank totally and tune it on e85, once this is done then you can start adding 98 and tuning different blends, this way you will always have a correct tune no matter what the content is

GCG RB25DET GTX Highflow I got a highflow turbo, its a 21u R33 turbo that has had a $1799 highflow job done by GCG in Sydney They used a gtx30 compressor wheel, this turbo is in good condition with very little shaft play. Comes with dump pipe and actuator and return hose and oxy sensor - what you see in the pics is what you get. The turbo is basically a gtx3071r Newcastle NSW, but can post no dramas, cash on pickup or DD only please.

WTB: R33 GTR struts I am after suspension from a r33 gtr. stock will do. let me know what you got - send me a pm please pref nsw - post to newcastle OK

I paid 29,000$ for my first R33 series 1.5 auto car. Price included insurance. Sure that brings the purchase price back down to 25k. This car can be purchased now for 2000- 4000$. It is just a shame that our cars have good good parts that other lesser cars need to be reliable which makes the demand for parts skyrocket. Suggestion, anyone got a spare 100k? buy as many r33 gtst's as you can and store them for 10 years.... bet you walk away with over a mill....

How many skylines are left? I been around the skyline scene since pretty much the start. We had alot of respect for our cars back then, we kept them so clean and in great condition! But now that time has gone on... all i see is wrecked skylines being parted out. Yeah sure I understand when some kid writes of his R33 skyline and it was too expensive for him to insure so he is trying to make some money back to get a car to get around in. I am seeing cars being destroyed that are in good road worthy condition just so the guy can make a quick buck, it is hard to sell a registered r33 series 1 manual for 4k these days but once you sell the engine and manual conversion and any juicy mods the car has had there is your 4k plus change, then a perfectly good shell goes to sims metal to be crushed. This pisses me off, I have bought a few cars and any car that could be put back on the road has been put back on the road and sold, not stripped and scraped, except for the couple of written off ones i have got in the past. So anyone got any idea what kinda numbers were imported and how many are actually left? At this rate a r33 skyline is going to be rare by 2020. *end of rant* Pic is of my R32 Skyline at Yas Island F1 track Abu Dhabi

The standard intake plenum has been known to flow quite a bit of power, and nissan would have spent alot of $$$ making them. The biggest hurdle you have when going to a FFP is even distribution between all the cyl's by intake design. If the plazmaman plenum flows even a little better horse power then a stock one then it is a win win situation because it has been tested to have even air distribution to all cyl's. Alot of plenums people make / buy go backwards. +1 for Plazmaman Video of a standard unopened rb25 that I tuned a few years ago with standard intake plenum and also standard exhaust manifold, external gate was welded onto the manifold or the rear housing i cannot remember now.

are they rear pods for a r33? if so let me know

Found this. http://www.gtr.co.uk/forum/144368-transfer-box-locked-4wd.html#/topics/144368?page=2&_k=gv0691 4wd could be locked on causing this issue

So i got a similar issue with my gts-4 When i try and turn into a car park or a sharp corner the whole front and rear lock up and you can hear the tyres skipping. Have bleed the system - no change. removed rear diff and checked diff ratio, 4.363:1 removed front diff cover checked diff ratio 4.363:1 front diff behaves normal when spinning wheels or the input remove shaft from transfer case to diff and issue goes away. Is there any other things you can check? before i remove the gearbox and change the transfer case. cheers

R32 / R33 RB26DETT Gear shifter Hey Sau ian's. I really need a gear shifter from a r32 / r33 gtr gearbox. I would really like to have both the cir clips and plastic shifter holder inside also. anyone who has a broken box with the shifter still in it please help me out, really starting to struggle with these cheap knock off short shifters i just want to go back to standard!! rb25 is different, rb20 is different.. must be from a rb26 Cheers

the walbro 255 needs to be run with a relay, also mistakes made during installation could also cause this.

this is sold

WTB: R33 Skyline Series 2 front bar Looking for a front bar for a r33 skyline series 2, pref it be in white, pref it have the bottom lip and it must have the lights in it in good condition. let me know what you got.