Jump to content
SAU Community

Piggaz

Members
 View Profile  See their activity

  • Posts

    8,948

  • Joined

  • Last visited

  • Days Won

    41

  • Feedback

    100%

 Content Type 

Everything posted by Piggaz

  1. Piggaz
    Will be grunty. What gearbox? ?
  2. Piggaz
    Series 1/2 or series 3?
  3. Piggaz
    7670/1.05 e85 supporting mods go.
  4. Piggaz
    Much more to it than just spring rates. That only tells you half the story. Valving is everything. ?
  5. Piggaz
    Double post.
  6. Piggaz
    The stock copper lines have done well for 25 years. Was it an installation issue?
  7. Piggaz
    Nismo cooler was purchased May 2011 so it’s not “that old”. I believe Hypertune were looking into a cast end tank. Not sure if it has happened, I haven’t seen one to date. The pics of that 33 look familiar ??
  8. Piggaz
    Hypertune 680x325x100 core.
  9. Piggaz
    Entry into a Nismo core.
  10. Piggaz
    What fuel pump do you have? What size is the return line? Is there any kinks in the return line? What size is the outlet of the reg? Knock off regs is just asking for trouble. It’s kind of important.
  11. Piggaz
    Johnny, isn’t the whole idea of a surge tank to have it full ALL THE TIME? Not 3/4, half sloppy around tank, empty at the end of the straight then turn into turn one, when you NEED IT! Why not just run twin intank pumps? Defeated the purpose of a surge tank IMO if it’s not full all the time. ? walbro 460 lift pump. The surge tank comes with -8 sized threads. Bit silly to go from -8 and pay for a a -8 to -6 adapter. Keep it -8 and put a bigger lift in it. You have 2x 460’s emptying the surge tank.
  12. Piggaz
    What if there is very little/no fuel coming back from the surge tank. Sensor gets no fuel flow, reading goes stupid, engine doesn’t know what ethanol content it is. Not a smart place for it IMO. Have seen it on another car and funnily enough it got moved.
  13. Piggaz
    Put a 1-2psi valve in the by pass. That way the sensor gets all the fuel it needs and as soon as there is a slight rise in pressure, the excess goes via the by pass.
  14. Piggaz
    I hope it’s going back on the dyno now that all the exhaust gas is making it to the snail and not exiting stage left before it! The “big turbo” won’t feel as big now. ?
  15. Piggaz
    How long till the twins are put in the bin and the 8374 goes back on?
  16. Piggaz
    Need a single. Don’t have to worry about equal length wanker junk. More power everywhere, better transient, just put one on it. Waste of money.
  17. Piggaz
    It does.
  18. Piggaz
    Hurry up and get the new gearbag!
  19. Piggaz
    Mate send scotty an email I’m sure he’d be more than willing to clear things up for you .
  20. Piggaz
    Didn’t see that you asked me a question, mate. Bin the stock recirc valves. There is no reason why they should still be on the car. Put one of those turbosmart units on the comp cover, turn it all the way to hard and see what it does. ?
  21. Piggaz
    That’s sick. Looking forward to whatbyou think about the efr with the “laggy big rear housing”. ?
  22. Piggaz
    Is your car finished Pete?
  23. Piggaz
    Away on holidays. Don’t give a shit.
  24. Piggaz
    Can’t really put a pressure on it. How does the head flow? What cams? How restrictive is the cooler? The list goes on and on. Buy one, put it in, wire it up. It’s not expensive.
  25. Piggaz
    The 9180/0.92 is kind of retarded. If you want the power that the 91 mm compressor can flow/give, you’re not going to get there by choking up the turbine side. So now you have a larger compressor and turbine to turn making it lazier than it needs to be THEN won’t make the power because it’s choked. the 8374/1.05 makes much more sense. No, it won’t be lazy/laggy because of the larger AR rear. Big compressors and small AR rears “to chase response” DONT work.
×
×
  • Create New...