Jump to content
SAU Community

Recommended Posts

4 hours ago, ActionDan said:

The pin/hinge and adjusting knob interest me, how have you got that setup and where'd you source the bits? 

 

 

It's just a cheap one off Ebay- 

https://www.ebay.com.au/itm/331881988969

I chose this one as it comes with the thread in the base of the mounting post. 

I bought a threaded rod and nuts if I need a longer adjuster. 

  • 1 year later...

It’s just dumb to have such similar designs that are only half compatible…

 

This is my latest tool “investment“.  I’ll use them for everything I’m assembling that I take photos of to put on Insta (ie. nothing….)  On Project Binki they call them the “show spanners!”

I’ve wanted them for ages so finally convinced myself they’re worth it when they’re actually totally not but meh. 🤷🏼‍♂️

C57E2752-7099-4991-A638-08806028BA12.thumb.png.f2d2fbdb6934e3adb98fbf8eff6d68d1.png

D6431D86-636F-4891-9580-8839F5278742.thumb.png.77fda2ecf996da1794c48c01528ad1d1.png

 

  • Like 1
On 28/12/2021 at 1:27 PM, Ben C34 said:

When you realise how Phillips head is designed to cam out when the torque is high it is f**king ridiculous it is still in use.

Must be cheaper to make...I would have thought that they would all go to allen key head or even torx...wish that they did, its easy to chew out a phillips/posidrive/jis head with a drill or impact driver.  Both doing up and undoing, lost count of the times I've had to use a dremel and cut a slot into a screw or bolt then 'shock' it out with a manual impact driver to get it out.

FYI for info on the phillips/JIS/Posidriv/Torx/etc options  check out https://en.wikipedia.org/wiki/List_of_screw_drives

Looks like the 'Vessel' brand does JIS, anyone have other suggestions on brand (or shop)?

On 28/12/2021 at 9:08 PM, MrStabby said:

FYI for info on the phillips/JIS/Posidriv/Torx/etc options  check out https://en.wikipedia.org/wiki/List_of_screw_drives

Looks like the 'Vessel' brand does JIS, anyone have other suggestions on brand (or shop)?

https://www.sealey.co.uk/product/5637750680/4pc-jis-screwdriver-set

 

  • Like 1

But, where do you ever come across JIS fasteners? Not in a Nissan thankfully.

And those long spanners are nice to use, but they just aren't feasible in most tight locations. 

On 30/12/21 at 9:09 AM, Duncan said:

But, where do you ever come across JIS fasteners? Not in a Nissan thankfully.

And those long spanners are nice to use, but they just aren't feasible in most tight locations. 

They’re like most specialty spanners ( S, C, stubby, ratcheting, high offset, etc) they’re shit for 95% of normal spanner jobs and absolutely essential for the 5% of situations where nothing else works. THAT is why you buy them, not for the presumption that 1 spanner fits all.  I have a stupid amount of different spanner sets now of which I will probably only use about 10% of but I’m sure you’ve been in a situation where nothing fits and it sucks balls.  I’ve wasted hundreds of dollars to avoid that incredibly rare situation but I think I just like collecting spanners! 😂 I should take a pic of all my different sets as I think I might even scare myself once I laid them all out….

  • Like 2
  • Haha 1

Have not seen many electrical tools mentioned so here are two I like. I'll see what else I can come up with.

1. Connecter depinning tools. I often see people stabbing away with a flat screwdriver only to crack and destroy their old connectors.

2. Cable tie gun. This will tighten and cut cable ties in one shot. Very practical and quick when you have 100's to do. 

 

IMG_20220102_184746.jpg

  • Like 2
  • 2 months later...
On 12/28/2021 at 5:52 PM, tridentt150v said:

Must be cheaper to make...I would have thought that they would all go to allen key head or even torx...wish that they did, its easy to chew out a phillips/posidrive/jis head with a drill or impact driver.  Both doing up and undoing, lost count of the times I've had to use a dremel and cut a slot into a screw or bolt then 'shock' it out with a manual impact driver to get it out.

Wait until you realise there's now a fastener/driver made called Torx Plus, and a Torx driver fits Torx plus heads. But under hogh torque will strip the driver or head...

  • 3 weeks later...
On 28/03/2022 at 9:34 PM, MBS206 said:

Wait until you realise there's now a fastener/driver made called Torx Plus, and a Torx driver fits Torx plus heads. But under hogh torque will strip the driver or head...

Yep, they basically have a double thickness star point.

 

I swear they purely make different fasteners so they can sell more tools.

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...