Jump to content
SAU Community

Recommended Posts

that interior looks neat as.... nice clean wiring too...

what are the mounts on the cage at the base near rear of drivers seat, they look like harness mounts but are too low surely??? what are they used for?

Indeed they are harness mounts, for the lap points. Good location really, between them and the shoulder straps mounted to the cage between the rear strut towers you are held firmly back and down into the seat. 2 more points under the seat for the 5th and 6th belts

Indeed they are harness mounts, for the lap points. Good location really, between them and the shoulder straps mounted to the cage between the rear strut towers you are held firmly back and down into the seat. 2 more points under the seat for the 5th and 6th belts

ahhh of course, nice...

should a half cage have the lap points on the cage as well or are the std seat mount points ok???

I'm ashamed I've only just stumbled across this thread Neil! Moving the cool car (read proper race cars with cages) threads from the Motorsport section was a mistake. I said that at the time.

Don't be ashamed mate,,,one of the biggest reasons I stopped posting was because of being made to post in this section.

I asked in the mod section why we couldn't have our race cars in the motorsport section,,,but R31Nismoid,,,Col-GTSX and N1GTR thought not,,,so that was that. Three experts no doubt.

So basically I have very little interest in posting in here.

Cheers

Neil.

should a half cage have the lap points on the cage as well or are the std seat mount points ok???

ACtually Schedule I of the CAMS manual (http://www.camsmanual.com.au/pdf/10_gen_req/GQ10_Schedule_I_Q411.pdf) covers off their requirements (and recommendations), but fundamentally the shoulder straps should be horizontal to the shoulders, and as short as possible

The standard seat belt mounts are not OK according to CAMS because it is more than 40o downwards from the shoulders.

Zeb, this is the 5th car we've built over 10 years, and the biggest thing I've learned is racing is incredibly hard on cars. Anything that is not 100% OK will catch you out sooner or later - so do it right the first time. Neat is OK, but it more important to be simple and quality/reliable.

Don't be ashamed mate,,,one of the biggest reasons I stopped posting was because of being made to post in this section.

I asked in the mod section why we couldn't have our race cars in the motorsport section,,,but R31Nismoid,,,Col-GTSX and N1GTR thought not,,,so that was that. Three experts no doubt.

So basically I have very little interest in posting in here.

Cheers

Neil.

LOL...how old are you Neil? I am 35...so how long until I look at things with the same cheery/rosey perspective as you :nyaanyaa:

This car does look better in real life then in pics...

I mentioned to Neil I should get Duncan to wire up the rest of my car like neils is... Neil laughed at that idea... I'm assuming there was a lot of swearing while the car was wired up... Lol

lol I'm more surprised at how much does work than the few things that don't!

hope those screens do go in this week, I don't need bugs in my teeth.

It could do with a wheel align too Brad ;) Put a lightweight in the driver's seat for the cornerweighting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...