Jump to content
SAU Community

Recommended Posts

I hade the standard rotors with Nismo pad's...stopped once or twice after that I was starting to get a solid peddle. Put the r32's and shitter rotor's and pad's on and it was much better on the same road....when to 324mm and hawk ceramic's with new dba'a and I had the neverfail experience....IMO the stock calipers and rotor size are good for a smallspirited drive...anything after that and your in gods hands!

1- possible

2- maybe

3- I don't think 20yo Sumitomo's are "Bling..." :happy:

The main problem that I get with the stock brakes is that after just one hard application I feel the stock rotors warp, and shudder. Driving round normally, there is no shudder, but once you step on it once, the things warp. I think the Rotors are soft- it seems a common progression with modern cars- once upon a time, I went 260k kms with just a hint of a lip on a rotor. These days I hear people driving daily's replacing rotors after 40k kms.

Just remember- Nissan put these brakes on a car 400kg lighter than ours, the 350Z. But on the track model they put Brembo.

I can think of a group of cars that have all brake options - a compo could be good!

  • Like 1

The Neotech arms are a nice piece of gear. Comparable to jap stuff easily.

Agreed. I am very impressed with the quality for the price.

Todays plans went smooth for doing the timing belt till a dud bolt snapped while doing up the CAS.

I didn't even have much pressure on it. looking at the bolt remnant, you could see half the split was old. Over-tensioned from previous owner.

So I had to remove bits again and drill/ezi-out the snapped bolt.

No damage done, and found while undoing the CAS frame/mount off the motor that one bolt was not tight ! so worth it overall.

I guess it pays to check every nut and bolt - even if you haven't touched it !!

JJR Front camber arms are now on tomorrows list !

Well, I finally bought some engine oil for mine, and am thinking of buying one of those Fumoto sump plug drains to make life even easier again! I've already got an oil filter relocation kit, so that helps!

Well we made it to tas (been here a few days now)

I'll be trying to give the car a break but my patents are down to help tidy the house and keep buying things from bunnings etc.

Just need to do the timing belt and oil now. I think I'll try the gw syn-x 3000 (autobarn for about $30)

I gets Me turbo back today!

Im a happy child :rolleyes:

Soooo, what's next on the list of things to go wrong?whistling.gif

Jokes, hope you start to have a few wins with this matethumbsup.gif

Soooo, what's next on the list of things to go wrong?whistling.gif

Jokes, hope you start to have a few wins with this matethumbsup.gif

um the Gear box :D LOL

yeh so do I. the POS has been a fail whale as of late..

Im going to go the route of new rotors & pads shortly, but stock calipers. Will see how it goes, I wont be 'tracking' my car so I dont think I reallllly need big f'off brakes.

Would be interesting to see a comparison between R33 / Brembo / Stock in pull up distances from 60km/h. Doubt it'll happen though.

When we have a meet, we can do a test compared to mine. But I think tyres will make a massive difference.

When we have a meet, we can do a test compared to mine. But I think tyres will make a massive difference.

They should definitely come in to it, but if we include that detail in the results perhaps it'll help highlight just how important it is to have decent tyres :thumbsup:

They should definitely come in to it, but if we include that detail in the results perhaps it'll help highlight just how important it is to have decent tyres :thumbsup:

True.

I could probably steal (I mean borrow) a VBox from one of my clients and get some solid results.

Cam Angle sensor is now rooted,

I think its been on the way out for a while, as I've been getting some stalls at idle, but now the code is showing.

At least its a known fix and the mechanic can get part parts easily.

1- possible

2- maybe

3- I don't think 20yo Sumitomo's are "Bling..." :happy:

The main problem that I get with the stock brakes is that after just one hard application I feel the stock rotors warp, and shudder. Driving round normally, there is no shudder, but once you step on it once, the things warp. I think the Rotors are soft- it seems a common progression with modern cars- once upon a time, I went 260k kms with just a hint of a lip on a rotor. These days I hear people driving daily's replacing rotors after 40k kms.

Just remember- Nissan put these brakes on a car 400kg lighter than ours, the 350Z. But on the track model they put Brembo.

I can think of a group of cars that have all brake options - a compo could be good!

That would be what happens when brake companies are not allowed to use asbestos anymore... that an the fact the world has gotten greedier than "once upon a time" :down:

I picked up my turbo..

everything fits. got the new turbo in

got me some new slotted rotors and QFM HPX type brake pads i must say still bedding in, and it feels much better than my original brakes. never realised how bad they actually were..

got the biggest i guess i could go in the standard housings. turbo is VERY laggy which should fix up on wednesdays tune. but our little actuato mod allows me to hold a flat 17-18 psi all the way through the rev range...oh without a boost controller and boost solenoid :D

no more testing the cars limit until tune :)

unfortunately that is a characteristic of bush bearing turbos.

expect about 1000rpm over the same size ball bearing turbo. I know the pain too well.....the race car runs standard n1 turbos which are big bush bearing ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...