Jump to content
SAU Community

Recommended Posts

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Could it be Atessa related?

Might be....tried bleeding it a couple of times now though.....my go and get it plugged into a consult to run the pump. Onto other new though...the power steering pump works well even though I have no adjustment because if the larger wheel....bit heavy on low revs but nothing unbearable.

drop the shaft from the xfer case to the front diff and see if the vibration disappears

Wont all the transfer fluid drain out?

We really need to find some method of running the attessa pump to assist bleeding, I will look through the wiring diags Prince Skyline lent me but I cant read Japanese...

Wont all the transfer fluid drain out?

We really need to find some method of running the attessa pump to assist bleeding, I will look through the wiring diags Prince Skyline lent me but I cant read Japanese...

Does it happen to be similar to bleeding attesa in a late model gtr?

Does it happen to be similar to bleeding attesa in a late model gtr?

Maybe but cannot find the fuse under the dash.....it's more than likely right in front of my face but I cannot confirm which wire we which!

And yes your right about the shaft Scott!

Maybe but cannot find the fuse under the dash.....it's more than likely right in front of my face but I cannot confirm which wire we which!

And yes your right about the shaft Scott!

isnt it a plug in behind the right kick panel? i remember seeing it somewhere in the stagea manual.. gimme a tic and i will find it.

Here's some pics of everything I've done to the Stagea lately.

Sold the Garrett 2530 and replaced it with a Garrett 3076 :D

post-48775-0-35032000-1298163125_thumb.jpg

Went to see my brother for some stainless allen key bolts and washers to compliment the polishing under the hood.

post-48775-0-81520800-1298163180_thumb.jpg

This is how my engine bay looks now.

post-48775-0-21520600-1298163264_thumb.jpg

Also refitted the HKS pod filter and Greddy catch can. You can also see my radiator and fans setup. There is an oil cooler in there somewhere too :P

post-48775-0-96225300-1298163278_thumb.jpg

:thumbsup:

  • Like 1

isnt it a plug in behind the right kick panel? i remember seeing it somewhere in the stagea manual.. gimme a tic and i will find it.

would be great if you could....then if you could give me a pointer on how or a link to use it that would be great!blush.gif

Fitted bilsteins back in with Nismo springs, had rotors machined, fitted new front shaft and changed the steering pump to the new spec one! All in all feels great....but the f#%king vibration is still there under load when powering to the left! .... I'm lost :(

Once you work out a fix, let me know! I have the same problem with the vibration under load (and cornering). :yucky:

Here's some pics of everything I've done to the Stagea lately.

Sold the Garrett 2530 and replaced it with a Garrett 3076 :D

post-48775-0-35032000-1298163125_thumb.jpg

Went to see my brother for some stainless allen key bolts and washers to compliment the polishing under the hood.

post-48775-0-81520800-1298163180_thumb.jpg

This is how my engine bay looks now.

post-48775-0-21520600-1298163264_thumb.jpg

Also refitted the HKS pod filter and Greddy catch can. You can also see my radiator and fans setup. There is an oil cooler in there somewhere too :P

post-48775-0-96225300-1298163278_thumb.jpg

:thumbsup:

looks killer mate, when does it get tuned??? who's tuning it for ya??

Once you work out a fix, let me know! I have the same problem with the vibration under load (and cornering). :yucky:

Im pretty sure everyone who has lowered their car has a similar vibration...

  • Nope 1

I FINALLY got on the dyno today.

exhaust is restrictive as, but none the less very happy with the result(for now)

229awkw with 702 NM of torque..

exhaust will be changed soon so we'll see how it is in a month.

ill put up a dyno sheet tomorrow at work :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...