Jump to content
SAU Community

Recommended Posts

What do you do for a job, again?

no idea..but damn it fun..

decided ahd to have a holiday b4 they send me to Bangkok

I'm stuck in a climate controlled factory with no windows. It could be the apocalypse outside and would not see/ or feel it. And any chance for stepping out during a break isn't possible as I'm wearing factory uniform :(

know that feeling, when in the office in melb I'm in a white room, cameras everywhere and no contact to the outside work.

need to reference BOM to work out what to wear to lunch.

no idea..but damn it fun..

decided ahd to have a holiday b4 they send me to Bangkok

know that feeling, when in the office in melb I'm in a white room, cameras everywhere and no contact to the outside work.

need to reference BOM to work out what to wear to lunch.

Travels the world, works in top secret laboratory. Sounds like you planning on taking over the world.

Dumb bitch in a white Celica changes lanes in front of me without indicating as we approach a red light. So I change into the lane she was originally in, we both end up in pole position. I see her talking to her passenger like a drop kick, not watching the lights...lights go green...I take off sedately. She catches up and yells out "let's go bro" in imitation wog accent and then puts her foot to the floor. Then a few car lengths ahead she sticks her hand out the window to either wave in victory or flip me off.

I don't want her to live on this planet anymore.

Gym brahs what's a good superset for shoulders? I got decent individual excersices for em but want to push to superset thinking something to go with the smith machine press

Suggestions pls.

Push ups work well as a superset item because you can do them anywhere. But supersets aren't really necessary if you're working your shoulders properly, unless you're trying to get quick workouts and save time. What does your current workout routine look like?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...