Jump to content
SAU Community

Recommended Posts

It's not the west dude... Place I worked in South Yarra he was referring to was $40 for a main

Yeah but he is clearly trying to budget else wouldn't stipulate a price at all.

$40 for a main is basically a minimum these days unless your goin local pub on Parma night

No, because people on those shows are not chefs. All they know how to do is copy someone else's idea and try not to f**k it up.

I remember a time when dishes had names on a menu, not just a list of every f**kin ingredient and process involved in making the dish.

Original fillet burger combo up sized

Good: new CEO's partner is a teacher; can't have much more in common with him

Bad: all departments now have KPIs including marketing which is unquantifiable tasks filled with white noise kind if work. Stupidity.

shit marketing one of the easiest to set KPI's on.

track web site impressions, leads generated incoming sales calls.

now in my consulting role, one of my KPI's is that I bill 75% of my time.

only thing is I have no interaction with the sales cycle, marketing or anything that can link to that KPI.

shit marketing one of the easiest to set KPI's on.

track web site impressions, leads generated incoming sales calls.

now in my consulting role, one of my KPI's is that I bill 75% of my time.

only thing is I have no interaction with the sales cycle, marketing or anything that can link to that KPI.

Easy to make KPIs for the department as a whole or the marketing manager.

But we are getting individual KPIs which just doesn't work when we all share the workload around randomly and work comes in randomly streamed down from product dev team and sales team.

e.g. There's no realistic or useful KPI for how good product packaging I design is, or how successful our trade shows are, short of surveying customers and getting a percentage of likes - which we don't do and never will. Worse yet they've hand balled us the task of writing our own KPIs which isn't open to exploitation at all. Dumb.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...