Jump to content
SAU Community

Sick of killing stock injectors for NO GOOD REASON. Details inside and please recommend a drop in replacement that wont break.


Recommended Posts

I have a Early build 1993 R33 Skylline GTS-T.

It is NOW my understanding that there's something different about these early S1 stock injectors that makes them extremely sensitive to modern fuels or additives especially if ethanol is involved in any way. Something about the potting compound used. Makes them ELECTRICALLY fail

I am on my 3RD set and sick of it! They are all perfectly spotless clean but get out of range resistance leading to infinite!

So here's the story

A few times Ive had e10 in my tank either cos my dad filled up and ive told him not to, or I've had to and mixed it with 98. The car ran great on it. It was a rare occurrence.

Now it seems its not the e10 that killed them but rather an addtitive. As a preventative measure, after I STOPPED using ethanol, I added Nulons "e85 performance fuel treatment". A few days later the car developed a miss that got worse and worse until it barely ran and I diagnosed and replaced all 6 injectors with a used pair of stock r33 inejctors.

Car ran great, for a few more weeks until AGIAN it started acting up. SAME thing.

I got a tested and working set of stock injectors. Drained the tank and refilled with 98. Car ran great for 10 months.

Never connecting the e85 fuel treatment to the problem, i added what I had left of it to a quarter tank of petrol. 2 hours later (which was yesterday). THE SAME problem.

The culprit seems to be the "Nulon E85 performance fuel treatment."

https://www.nulon.com.au/products/Fuel_Treatments/E85_Performance_Fuel_Treatment

I drained the tank refilled and the car still barely runs.

I need to replace my injectors AGAIN.

I dont want to pay for a custom ECU and tune, so are there any updated modern injectors that are not as sensitive that are plug and play in a stock R33?

Can I use S2 injectors in an S1?

 

 

 

 

Edited by sonicz

Pretty sure you didn't read the OP.

Not running ethanol anymore. It only had very little anyway. Its a stock car with minor upgrades like intercooler coil packs, higher boost etc.

I need to know if any modern injectors that are also 370cc will fit the car, or if S2 injectors will work in an early S1. Because stock S1 injectors have been complete trash to me not paying for another set.

Edited by sonicz

I honestly thought you were joking. 

Stop using e85 treatment. Look at the msds, there is a 40% makup of additive that is not used in straight petrol treatment.

Stop using e10.

 

Standard side fed injectors are jecs. Other jecs 370cc may work with your rail etc. s15 ones work for reference etc.

 

I thought the obvious answer was don't put the treatment in ever again and you'll never have the issue again 

Most Nissan turbos use those 370cc side feed injectors. 

AFAIK s1/s2 fuel injectors are interchangeable.

SR20 turbo motors use same injectors, with the exclusion of the jap s15 motor that has 440cc ones, or 380cc if you believe the hype/run 4 bar base pressure. 

 

TBH i haven't done enough reading into this fault you refer to about the injectors being lower quality, nor heard of it before.

Im pretty sure anyone who touches an ethanol blend on these cars, has changed injectors.

 

if you serious about hating the injectors, perhaps look at replcing them with a newer one....i doubt your going to find any stock sized ones tho.

places like detcaworks do the 550 cc bolt in replacements

but obviously you would need a tune.

Guys you are making this seem more simple than it is...First of all ive stopped using ethanol. 

 

As for the obvious answer being to stop using the treatment it wasnt so obvious.

The first injectors i thought died due to the ethanol use or old age. But it was likely due to the additive.

The second set died due to using the same fuel in the tank with the treatment in WHICH I HAD NO IDEA CAUSED PROBLEMS 

-The 3rd set just died a few hours after adding the treatment. 

 

IT was only yesterday i suspected the additive. after the 3rd set died.

I am obviously never going yo use it again but i think its important to note

NOWHERE DOES IT SAY THE NULON e85 treatment not suitable for unleaded fuel! 

It also says it cleans and protects injectors valves cylinder walls etc. 

And im still 3 injectors down.and need a 4th set. I dont want to put in another stock set! 

 

Edited by sonicz

Why would you be using e85 additive stuff if your not running e85?
I'm sure there was an article/ test done a while back that none of those additive things gave any benefit

  • Like 1

Kiwirs4t. Its the injectors fault because they are obviously over sensitive. I find it difficult to beleive a newer car will have such problems with an off the shelf additive.

 

Uwish. Because i had had ethanol in there on the odd occasion, I wanted to protect it from any corossion or water..I was being cautious but as you can see it did harm instead of good.

U guys seem to be missing the point if its designed to help with e85 it should help with any ammount of ethanol. Lucas oil have an additive in America thats similar to the nulon stuff but with with e10 e15 e85 etc. It doesnt matter...

Not to mention it says it does a lot of other things as well.

 

 

How about install modern injectors, with stainless bodies. Then install a Nistune with a Z32 AFM. 

Will probably be more time/cost effective for your issues and also youll have head room for the future once you drop in a bigger turbo :)

Everyone wins.

2 hours ago, sonicz said:

Not to mention it says it does a lot of other things as well.

You should contact that company and ask them to replace injectors for you.

Absolutely Nothing wrong with s1 injectors! If your not chasing bigger power stick with them and get them professionally cleaned and tested...problem solved! And as others have said, never put in e10 or e85...even e85 additives. Ive only ever run 98 in my s1 and never had dramas with injectors. Just throwing it out there but If it keeps happening it may have also affected your fuel pump.

WMDC35, They are grey on mime not pink.

Nizmo man, no chance they would admit it was their product that caused it.

TY 1, they are not dirty. They were spotless when i took them out. Even opened them up..Spotless. As I said they failed electrically.

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...