Jump to content
SAU Community

Recommended Posts

I run a 2way full time. All comes down to have you like your set up to be. I’m a little happy on the track with front brake bias high and steer with the rear. If you don’t like the rear being a little loose on corner exit just run a stock lsd and you will be fine

Time attack/track work I would personally go with a 1/1.5 way only.

I have a 2 way KAAZ LSD and I can say that driving my friend's car with a 1.5 way around a technical track, it's actually faster than mine with a 2 way.

The thing is, all 1 ways, 2 ways, 1.5 ways etc are all 2 ways, just with different ramp angles.

If you want to go down the rabbit hole, go asking for ramp rate specs on diffs. Nismo actually only make a 1 way and a 2 way diff.

I'd wager that's the same for most manufacturers.

The "1.5 way" people are talking about is likely the 1 way, i.e the 45/90 ramp diff. (45 accel, 90 decel). My old "2 way" diff was also a 'real' 1.5 way with ramp angles of about 45/60.

Are other 2 ways true 45/45 '2 way' diffs? You'd have to ask. As for what is best... well, it really depends a lot of your driving style.

Depends on which cam is selected.

kaaz-adv-5-711x400.jpg?resize=711%2C400&+

image.png.a5e406d3f3105de9383648936262b26e.png

 

I definitely can say my 2 way KAAZ looks like this (actual photo of my diff)

image.thumb.png.a2c438551d755822b16e52161fda727e.png

 

and my mate's 1.5 way looks like the below (not his photo)

image.png.e546888de035199f8d9a58ce4c9c772a.png

 

 

 

 

  • Like 5

For what it is worth the Nismo 1.5 way I have is so fkn tight it may as well be a two way.  Shits me to tears it does. Clunkety clunk clunk.

It isn't just the ramp angle that is key here.  The amount of preload on the clutch packs before you add the motors torque is also important.  Get much of that and the diff will be an annoying clunkfest.

@admS15That looks like a 1.5 way. Assymetric ramp angles.

What djr said is correct. The ramps define how much of the locking power is applied on accel and decel, (ie 1, 1.5 or 2 way) and the rest of the diff (the number of clutch plates, springs etc) in the mechanism define the breakaway torque. You can make a 2-way diff with low breakaway torque that will behave nicely without clunking, but it will open up earlier than you might like. Or you can make one that might as well be welded. Cusco have a range of different diffs that cover that span and some even offer adjustment of how tighjt they are.

  • Like 1
11 hours ago, Dose Pipe Sutututu said:

and my mate's 1.5 way looks like the below (not his photo)

image.png.e546888de035199f8d9a58ce4c9c772a.png

 

This is a 1 way 😛

Good example though! 😛

but yes when selecting a diff.. "1 way" or "1.5 way" or "2 way" is very much like "Stage 1 turbo". There's not really enough information there.

I guess they key point is, you don't want/need a diff that locks the wheels together under deceleration as that promotes understeer on turn in. If you are buying, preference should be 1 > 1.5 > 2.

Having said that the GTR (non 33 vspec) factory diff is a mechanical 2 way and can be readily shimmed for the level of carpark clunking you want, That's all we use in the race car and it is a good thing, thanks Nissan.

49 minutes ago, ERO54N said:

Hey guys,

Just wondering what the benefits of an open diff are when compared to any sort of LSD on track? Genuine question.

 

When you've binned your car and one wheel/hub is completely seized but you want to try drive it back to the pits.

 

  • Like 2
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...