Jump to content
SAU Community

Buy 370z over R33?

Blakeo
 Share

Recommended Posts

Blakeo Rising Star

Blakeo

Posted
Posted

Been considering selling my R33, stripping all the aftermarket parts off and selling it as a stock example. And upgrading to a 370z that I'd ideally buy a ~2015 model for around $35k and with the extra money from selling parts off my 33 put a supercharger kit on the 370z. 

How would a 370z with a Stillen supercharger kit compare to my 33 which makes 440rwhp? 

I mostly want to upgrade because the car is much newer and I won't have to deal with rust/seal issues which will likely crop up with the 33 soon. However I've also spent a lot of money on the 33 and owned it for the last 8 years so its going to be difficult for me to sell.. 

Opinions?

Link to comment
https://www.sau.com.au/forums/topic/482353-buy-370z-over-r33/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

Meh, either way?

It's recreational money spending whatever you do. There is no value proposition.

But, you're not going to get anywhere near the 550+ engine HP you have in the R33 from a supercharged VQ, and it is a ceentrifugal blower too right? So not even the promise of more boost from idle. The 370 might arguably drive better and put the power down better than the R33, so could be a better thing on the road, but it will not be as fast when stretching it out - only (possibly) faster in the cut and thrust of traffic, just off the lights, out of roundabouts, etc.

But if you want to get away from all the foibles of a rusty old R33 into something that is only marginally less ugly, then now is the time. People are paying dumb money for Skylines.

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

Depends, I have driven a few supercharged/turbo Zs from 260 to 450kw. Fun with all the modern things. 

Now after having my 370 for a while it's not a great car as daily driver. No room for groceries, not good on rough/poor condition roads (Townsville to Brisbane 1400km one way) and getting in and out of it. Mine is a nismo so suspension and seats are different but nothing different to Coilovers. I was going to turbo it but have given up on that as would ruin its reliability and could go buy a 2nd hand bmw/vw and not have to change the whole fuel system, cooling and other bits. 

Was going also going to sell my Rb25 sil80 but it does a few things better than the Z. 

Also depends if you are going to track it as Z needs decent oil cooler to help temps but everything else is good to go. 

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted
39 minutes ago, admS15 said:

I've had similar thoughts, wrote an ad to sell the skyline but then common sense or not so common sense prevails. CAN NOT SELL SKYLINE.. 

Yeah I was at the same point with my car too but it is cool to drive old cars around.... 

*stares at the HQ in the garage *

  • Like 1
  • Haha 1
Blakeo Rising Star

Blakeo

Posted
  • Author
Posted
3 hours ago, GTSBoy said:

Meh, either way?

It's recreational money spending whatever you do. There is no value proposition.

But, you're not going to get anywhere near the 550+ engine HP you have in the R33 from a supercharged VQ, and it is a ceentrifugal blower too right? So not even the promise of more boost from idle. The 370 might arguably drive better and put the power down better than the R33, so could be a better thing on the road, but it will not be as fast when stretching it out - only (possibly) faster in the cut and thrust of traffic, just off the lights, out of roundabouts, etc.

But if you want to get away from all the foibles of a rusty old R33 into something that is only marginally less ugly, then now is the time. People are paying dumb money for Skylines.

Good point, I don't think the VQ makes enough power. But there's not many other cars in the 30-40k price range that can come close to what an RB can put out with ~$15k spent on it. It's a tough one, considering spending the extra upgrading the 33. 

 

2 hours ago, tridentt150v said:

Meh...sell and buy a Genesis or a Stinger...straight out of the box, nothing to modify.

I torture myself with this train of thought all the time....but done nothing!!!

Haha same mate, not too keen on the Genesis. But I quite like the Stinger, I'm holding out for the 400Z can't decide what to do but. 

2 hours ago, SteveL said:

370z is a nice car to drive and, personally, on looks alone I'd take one of those over an R33 any day.     Had a supercharger on my Silhouette for awhile.   Great around town......BW diff didn't like it much though.

Yeah I definitely prefer how the 370z looks, I don't mind my series 2 r33 from the front but the back end is ugly in my opinion. 

 

1 hour ago, hardsteppa said:

Didn't you only recently make a topic on this exact same subject referencing the same 2 cars?

Could have sworn it was about a Patrol, but you are probably right. Not sure where else to ask and I appreciate your guys opinions. 

1 hour ago, robbo_rb180 said:

Depends, I have driven a few supercharged/turbo Zs from 260 to 450kw. Fun with all the modern things. 

Now after having my 370 for a while it's not a great car as daily driver. No room for groceries, not good on rough/poor condition roads (Townsville to Brisbane 1400km one way) and getting in and out of it. Mine is a nismo so suspension and seats are different but nothing different to Coilovers. I was going to turbo it but have given up on that as would ruin its reliability and could go buy a 2nd hand bmw/vw and not have to change the whole fuel system, cooling and other bits. 

Was going also going to sell my Rb25 sil80 but it does a few things better than the Z. 

Also depends if you are going to track it as Z needs decent oil cooler to help temps but everything else is good to go. 

I think I really need to test drive one, going to see if I can tomorrow. 

  • Like 1
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Throw it all on DOGE coin right now, then cash out buy a M2 CS lol...

DYOR, this is not financial/car advice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

... keep the R33, I did that.. although I wanted to sell the croc of shit so many times. Nek minnit, $15k respray and another motor being built.

I am dumb.

  • Like 3
  • Haha 3
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
18 minutes ago, PLYNX said:

Only cause I cured you !

Hallelujah !  Hallelujah ! Praise the Gods of Speed ! . . . . . . . 

 

. . . . . . but not you financial pain ! 

That's for you and the Gods of Finance to sort out.

Oh and you will be Judged ! 

Minister of War & Finance has demanded house renos.
House renos are in place at the moment 😂

SteveL Mentor

SteveL

Posted
Posted

....or - better yet - forget about ruining a perfectly good car and just go out and buy a taxi with its own pre-installed boat anchor.....

[that should get 'em going.....in my defence I'd note that I've done the Chev 350 into Jag thing but that was years before I got my GTR, and the Z come to think of it]

  • Like 1
tridentt150v Grand Master

tridentt150v

Posted
Posted

"Yeah I definitely prefer how the 370z looks, I don't mind my series 2 r33 from the front but the back end is ugly in my opinion." 

Looks are a personal thing, I'm not wrapped in the 370/Porsche type humpback look to be honest.  They all look like Vee Dub beetle clones.  Even Porsche are slowly evolving away from that look [but while trying not to alienate trad owners]. 

  • Like 2
GTSBoy Grand Master

GTSBoy

Posted
Posted

350 and 370 are just bastard Renaults and I couldn't live with one. At least the 400Z has dumped a lot of the Frenchness - not that I can afford to waste that much money on a car so my opinion on that matter is moot.

Nothing can save the R33 from looking like a 1995 Maxima powerfully buttf**ked a 1996 Magna.

joshuaho96 Veteran

joshuaho96

Posted
Posted

Q60/Q50 has EPS which isn't much to write home about, god forbid you have the direct adaptive steering system which disconnects the steering column from the wheel so you have zero feedback and some electronic controller silently doing steering inputs behind your back. The 400Z hopefully has some form of hydraulic power steering and a lot of refinement to make it less of an 8/10ths car as everyone seems to think the 350/370Z are. Either way, the VR30DDTT will be a throwback to the Z32 TT with its tremendously cramped engine bay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...