Jump to content
SAU Community

Recommended Posts

The arches are being professionaly rolled by these guys http://www.archenemy.co.uk/ - no drift tyte rolling here

I will change for a 245/45 when i have killed the current ones off - no point ditching new tyres for the sake of it.

Will the below wheels fit a late model Stagea?

Front - 19" x 8.5" (30 mm offset) 245/35/19

Rear - 19" x 9.5" (30 mm offset) 265/35/19

no.

you need to match the rolling diameter of the tyres on the front and the back at all times. so, the closest match ive found for 19s is a 235/35/19 on the front for an 8.5" rim and a 275/30/19 on the rear for a 9.5" rim. there is only about 3mm difference in rolling height between the two. that info is from the official tyre standards book i have at work (im a tyre fitter)

D.

no.

you need to match the rolling diameter of the tyres on the front and the back at all times. so, the closest match ive found for 19s is a 235/35/19 on the front for an 8.5" rim and a 275/30/19 on the rear for a 9.5" rim. there is only about 3mm difference in rolling height between the two. that info is from the official tyre standards book i have at work (im a tyre fitter)

D.

Thanks D.

Is that the only reason they won't fit? What about physical dimensions around the guard/brakes/suspension?

I had these on a 350z Track and the traction control requires very specific rolling diameter front to back and apart from the 275 rear you suggest (which i was originally after, but difficult to find in reasonable price tyre that matched the front) the next best option by mm's was 265.

i haven't had a chance to try those sizes on my car yet but i'm assuming they will a tight fit physically, my car is also a manual so i require different offsets to autos. as long as the offset is good then brake clearence wont be an issue.

ill check rolling diameters on 265s tomorrow but it would definately need to be a 30 series to be anywhere close to matching a 245/35... il see what i can find but from memory, the only thing close enough to a match was the 235/35 and 275/30

D.

edit: oops, meant to be in reply to last page... see http://www.skylinesaustralia.com/forums/in...t&p=4559953

Interesting; I have those exact same rims (R33 GTR I mean) on my series 2 with standard suspension, no spacers. They sit pretty well too I think... 245/45/R17.

re. KiwiRS4T:

I agree - that's right, tyres are not wide enough at 245... but anything wider than that in tyres is sooo darned expensive... even at 17's. I calculated my tyre width as being about right at 245mm with 9-inch wide R33 GTR wheels (245mm ~= 9.6") but alas, evidently I did not allow enough for the lip/beads/whatever, and they are stretched but only a little. Tye fitter told me about it and said it was ok but that I would get a little premature wear on the edges.

Edited by DaveB

ok, got some sizes here.

for 19'' tyres with 35 series profile- all will fit an 8.5" rim legally

215 - 633mm

225 - 641

235 - 647

245 - 655

255 - 661

265 - 669

275 - 675

30 series- all will fit a 9.5" rim legally

255 - 637

265 - 643

275 - 649

285 - 655

so, closest matches are 225/35/19 and 265/30/19 only 2 mm difference between

and, 235/35/19 and 275/30/19 only 2 mm diffenence

BUT

235/35 and 275/30 are nominal sized tyres for 8.5 and 9.5" rims

the other sizes will fit legally and safely but the nominal (reccomended) sizes are 235/35 and 275/30

hope this helps people out

D.

I think your rears might be close to the struts. I currently have 19 x 8.5 + 20 rims on my car front and rear. I have about an inch of clearance from the inside of the rim to the rear strut. With an inch wider rim and also the 10mm difference in offset it will be close to the strut tower. If you can test fit the rims I would check this for sure to make sure you have enough clearance. FYI mine is a manual version so has slightly different rear end setup so it may not be an issue with your car but it always pays to check.

Edited by StageaTypeS

Hi everyone, newbie here with a boring question but info on stageas seems hard to come by. Anyone know what the standard tyre fitment is for 2001 (M35) stagea. Has standard factory 6 spoke 16inch wheels. Current hard and cracked tyres look like prob originals from japan 205-65-16. Did quick measure rims look like 6 1/2 inch. Judging by our websites here in NZ that looks like an oddball tyre size, not much selection available. Any recommendations for4 average driving but something a little bit extra grippy like Re001's etc... Thanks

Standard fitment should be on sticker inside wall. I am using Re001 235/45/17 - used to have 215/55/16 on my last set of rims - look for a set of V35 17in rims if you don't have the cash for Rays just now - they will look good and stock at the same time.

Standard fitment should be on sticker inside wall. I am using Re001 235/45/17 - used to have 215/55/16 on my last set of rims - look for a set of V35 17in rims if you don't have the cash for Rays just now - they will look good and stock at the same time.
Tired after work - meant to say sticker should be on inside of drivers door on pillar.
  • 2 weeks later...
Your tyres are not wide enough. I guess you are going to get wider ones when you "adjust" your wheel arches (quote from Yokotas13 "baseball bat is your friend") but some people seem happy to run with "stretched" tyres which will not handle as well as properly fitted tyres. It appals me but for some it seems a kind of fashion statement!

What a load of old tosh. 235s on a 9 is no stretch, its barely any tighter than a perfect 'square' fitment. The big sidewall protectors most modern tyres have makes them look as though they're pulled tighter than they are. There'll be no disadvantage to the handling there.

Now, if he had 10s or wider...you might have had something to carp about.

What a load of old tosh. 235s on a 9 is no stretch, its barely any tighter than a perfect 'square' fitment. The big sidewall protectors most modern tyres have makes them look as though they're pulled tighter than they are. There'll be no disadvantage to the handling there.

Now, if he had 10s or wider...you might have had something to carp about.

Tosh? Tosh? Possibly my fault for making two points in one post. Califunky's tyres are not wide enough - 235s on 9in rims may be acceptable according to the charts but looking at the photos with this particular tyre/rim application they are not square enough for my liking but certainly not bad enough to ditch - I too would want my money's worth out of the rubber..

but I have seen other people (not Califunky) with ridiculously stretched tyres - possibly to fit under guards or because they bought the wide rims but find they can't afford the stratospheric prices for the rubber to go with them. i guess it makes sense for the drifters because they are after controlled power slides so want to lose traction and grip ( opposite to the norm).

p.s reference to baseball bat was a joke - I wouldn't use one on my car either but with Yokotas i am not quite sure whether or not that was in jest!

Hi everyone, newbie here with a boring question but info on stageas seems hard to come by. Anyone know what the standard tyre fitment is for 2001 (M35) stagea. Has standard factory 6 spoke 16inch wheels. Current hard and cracked tyres look like prob originals from japan 205-65-16. Did quick measure rims look like 6 1/2 inch. Judging by our websites here in NZ that looks like an oddball tyre size, not much selection available. Any recommendations for4 average driving but something a little bit extra grippy like Re001's etc... Thanks

For M35 16" wheel, OEM size is 205/65R16 with 95 load rating and S speed rating. Should be dirt cheap to replace...

For M35 16" wheel, OEM size is 205/65R16 with 95 load rating and S speed rating. Should be dirt cheap to replace...

:D

You sure bud?

AR-X should be 18's.

My RS is 215/55R17, 7" wide.

Can't remember the load & speed rating, but it was different to my mate's RS :)

I believe that the 16's came on the 250RS (RWD N/A)... and looked crap in those huge wheel arches!

Ah yes, us Aussies with our Turbos get the 17s on RS/RX and 18s on the AR-X, but the Kiwi's can have a NA 2.5 Direct injection which comes with 16" wheels on both 2wd and 4wd RS and RX models.

And in 2wd, they also only get a 4 speed gearbox...

:)

You sure bud?

AR-X should be 18's.

My RS is 215/55R17, 7" wide.

Can't remember the load & speed rating, but it was different to my mate's RS :)

I believe that the 16's came on the 250RS (RWD N/A)... and looked crap in those huge wheel arches!

  • 4 weeks later...

hate to revive an old thread but the question seems a better fit here than other or a new thread:

will wheels off a 350Z fit an M35 stagea?

while I'd like to go to 18's these are for sale and look great:

350zwheel.jpg

Fronts 17 x 7 1\2 inch

Rears 17 x 8 inch

Comes with Set of Bridgestone Potenzas - Not Fitted

225 45 R17 x 4 70 - 80% Tread

hate to revive an old thread but the question seems a better fit here than other or a new thread:

will wheels off a 350Z fit an M35 stagea?

while I'd like to go to 18's these are for sale and look great:

350zwheel.jpg

Fronts 17 x 7 1\2 inch

Rears 17 x 8 inch

Comes with Set of Bridgestone Potenzas - Not Fitted

225 45 R17 x 4 70 - 80% Tread

Offset?

If you are getting bigger brakes, don't bother with these. You will never fit them over the larger calipers.

Stock RS wheels are 17x7 so these will easily fit if the offset is satisfactory.

One last thing. Try to keep the wheels and tyres the same size all round.

I know the Z33's and V35's of the world generally have wider rear tyres, but that is because they are RWD cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...