Jump to content
SAU Community

Recommended Posts

The arches are being professionaly rolled by these guys http://www.archenemy.co.uk/ - no drift tyte rolling here

I will change for a 245/45 when i have killed the current ones off - no point ditching new tyres for the sake of it.

Will the below wheels fit a late model Stagea?

Front - 19" x 8.5" (30 mm offset) 245/35/19

Rear - 19" x 9.5" (30 mm offset) 265/35/19

no.

you need to match the rolling diameter of the tyres on the front and the back at all times. so, the closest match ive found for 19s is a 235/35/19 on the front for an 8.5" rim and a 275/30/19 on the rear for a 9.5" rim. there is only about 3mm difference in rolling height between the two. that info is from the official tyre standards book i have at work (im a tyre fitter)

D.

no.

you need to match the rolling diameter of the tyres on the front and the back at all times. so, the closest match ive found for 19s is a 235/35/19 on the front for an 8.5" rim and a 275/30/19 on the rear for a 9.5" rim. there is only about 3mm difference in rolling height between the two. that info is from the official tyre standards book i have at work (im a tyre fitter)

D.

Thanks D.

Is that the only reason they won't fit? What about physical dimensions around the guard/brakes/suspension?

I had these on a 350z Track and the traction control requires very specific rolling diameter front to back and apart from the 275 rear you suggest (which i was originally after, but difficult to find in reasonable price tyre that matched the front) the next best option by mm's was 265.

i haven't had a chance to try those sizes on my car yet but i'm assuming they will a tight fit physically, my car is also a manual so i require different offsets to autos. as long as the offset is good then brake clearence wont be an issue.

ill check rolling diameters on 265s tomorrow but it would definately need to be a 30 series to be anywhere close to matching a 245/35... il see what i can find but from memory, the only thing close enough to a match was the 235/35 and 275/30

D.

edit: oops, meant to be in reply to last page... see http://www.skylinesaustralia.com/forums/in...t&p=4559953

Interesting; I have those exact same rims (R33 GTR I mean) on my series 2 with standard suspension, no spacers. They sit pretty well too I think... 245/45/R17.

re. KiwiRS4T:

I agree - that's right, tyres are not wide enough at 245... but anything wider than that in tyres is sooo darned expensive... even at 17's. I calculated my tyre width as being about right at 245mm with 9-inch wide R33 GTR wheels (245mm ~= 9.6") but alas, evidently I did not allow enough for the lip/beads/whatever, and they are stretched but only a little. Tye fitter told me about it and said it was ok but that I would get a little premature wear on the edges.

Edited by DaveB

ok, got some sizes here.

for 19'' tyres with 35 series profile- all will fit an 8.5" rim legally

215 - 633mm

225 - 641

235 - 647

245 - 655

255 - 661

265 - 669

275 - 675

30 series- all will fit a 9.5" rim legally

255 - 637

265 - 643

275 - 649

285 - 655

so, closest matches are 225/35/19 and 265/30/19 only 2 mm difference between

and, 235/35/19 and 275/30/19 only 2 mm diffenence

BUT

235/35 and 275/30 are nominal sized tyres for 8.5 and 9.5" rims

the other sizes will fit legally and safely but the nominal (reccomended) sizes are 235/35 and 275/30

hope this helps people out

D.

I think your rears might be close to the struts. I currently have 19 x 8.5 + 20 rims on my car front and rear. I have about an inch of clearance from the inside of the rim to the rear strut. With an inch wider rim and also the 10mm difference in offset it will be close to the strut tower. If you can test fit the rims I would check this for sure to make sure you have enough clearance. FYI mine is a manual version so has slightly different rear end setup so it may not be an issue with your car but it always pays to check.

Edited by StageaTypeS

Hi everyone, newbie here with a boring question but info on stageas seems hard to come by. Anyone know what the standard tyre fitment is for 2001 (M35) stagea. Has standard factory 6 spoke 16inch wheels. Current hard and cracked tyres look like prob originals from japan 205-65-16. Did quick measure rims look like 6 1/2 inch. Judging by our websites here in NZ that looks like an oddball tyre size, not much selection available. Any recommendations for4 average driving but something a little bit extra grippy like Re001's etc... Thanks

Standard fitment should be on sticker inside wall. I am using Re001 235/45/17 - used to have 215/55/16 on my last set of rims - look for a set of V35 17in rims if you don't have the cash for Rays just now - they will look good and stock at the same time.

Standard fitment should be on sticker inside wall. I am using Re001 235/45/17 - used to have 215/55/16 on my last set of rims - look for a set of V35 17in rims if you don't have the cash for Rays just now - they will look good and stock at the same time.
Tired after work - meant to say sticker should be on inside of drivers door on pillar.
  • 2 weeks later...
Your tyres are not wide enough. I guess you are going to get wider ones when you "adjust" your wheel arches (quote from Yokotas13 "baseball bat is your friend") but some people seem happy to run with "stretched" tyres which will not handle as well as properly fitted tyres. It appals me but for some it seems a kind of fashion statement!

What a load of old tosh. 235s on a 9 is no stretch, its barely any tighter than a perfect 'square' fitment. The big sidewall protectors most modern tyres have makes them look as though they're pulled tighter than they are. There'll be no disadvantage to the handling there.

Now, if he had 10s or wider...you might have had something to carp about.

What a load of old tosh. 235s on a 9 is no stretch, its barely any tighter than a perfect 'square' fitment. The big sidewall protectors most modern tyres have makes them look as though they're pulled tighter than they are. There'll be no disadvantage to the handling there.

Now, if he had 10s or wider...you might have had something to carp about.

Tosh? Tosh? Possibly my fault for making two points in one post. Califunky's tyres are not wide enough - 235s on 9in rims may be acceptable according to the charts but looking at the photos with this particular tyre/rim application they are not square enough for my liking but certainly not bad enough to ditch - I too would want my money's worth out of the rubber..

but I have seen other people (not Califunky) with ridiculously stretched tyres - possibly to fit under guards or because they bought the wide rims but find they can't afford the stratospheric prices for the rubber to go with them. i guess it makes sense for the drifters because they are after controlled power slides so want to lose traction and grip ( opposite to the norm).

p.s reference to baseball bat was a joke - I wouldn't use one on my car either but with Yokotas i am not quite sure whether or not that was in jest!

Hi everyone, newbie here with a boring question but info on stageas seems hard to come by. Anyone know what the standard tyre fitment is for 2001 (M35) stagea. Has standard factory 6 spoke 16inch wheels. Current hard and cracked tyres look like prob originals from japan 205-65-16. Did quick measure rims look like 6 1/2 inch. Judging by our websites here in NZ that looks like an oddball tyre size, not much selection available. Any recommendations for4 average driving but something a little bit extra grippy like Re001's etc... Thanks

For M35 16" wheel, OEM size is 205/65R16 with 95 load rating and S speed rating. Should be dirt cheap to replace...

For M35 16" wheel, OEM size is 205/65R16 with 95 load rating and S speed rating. Should be dirt cheap to replace...

:D

You sure bud?

AR-X should be 18's.

My RS is 215/55R17, 7" wide.

Can't remember the load & speed rating, but it was different to my mate's RS :)

I believe that the 16's came on the 250RS (RWD N/A)... and looked crap in those huge wheel arches!

Ah yes, us Aussies with our Turbos get the 17s on RS/RX and 18s on the AR-X, but the Kiwi's can have a NA 2.5 Direct injection which comes with 16" wheels on both 2wd and 4wd RS and RX models.

And in 2wd, they also only get a 4 speed gearbox...

:)

You sure bud?

AR-X should be 18's.

My RS is 215/55R17, 7" wide.

Can't remember the load & speed rating, but it was different to my mate's RS :)

I believe that the 16's came on the 250RS (RWD N/A)... and looked crap in those huge wheel arches!

  • 4 weeks later...

hate to revive an old thread but the question seems a better fit here than other or a new thread:

will wheels off a 350Z fit an M35 stagea?

while I'd like to go to 18's these are for sale and look great:

350zwheel.jpg

Fronts 17 x 7 1\2 inch

Rears 17 x 8 inch

Comes with Set of Bridgestone Potenzas - Not Fitted

225 45 R17 x 4 70 - 80% Tread

hate to revive an old thread but the question seems a better fit here than other or a new thread:

will wheels off a 350Z fit an M35 stagea?

while I'd like to go to 18's these are for sale and look great:

350zwheel.jpg

Fronts 17 x 7 1\2 inch

Rears 17 x 8 inch

Comes with Set of Bridgestone Potenzas - Not Fitted

225 45 R17 x 4 70 - 80% Tread

Offset?

If you are getting bigger brakes, don't bother with these. You will never fit them over the larger calipers.

Stock RS wheels are 17x7 so these will easily fit if the offset is satisfactory.

One last thing. Try to keep the wheels and tyres the same size all round.

I know the Z33's and V35's of the world generally have wider rear tyres, but that is because they are RWD cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...