Jump to content
SAU Community

Recommended Posts

Nick, Yes, All the PM35 to the end of production are eligible for compliance BUT only from North Shore Prestige.

It is missleading of any other importer to suggest that they can get a PM35 complied as North Shore Prestige are ONLY complying cars for themselves to sell.

Quoted for accuracy :)

And so should Northshore only comply cars that they are selling, didn't see anyone else put up the $$$$$'s to get the compliance cert.

Incidentally, J-spec have the PM35 listed as "not eligible for import" on their website (or at least they did 2 days ago)

  • 4 weeks later...

Saw this a while ago featured in a mag. shame its RWD and not 4WD, but as the number plates suggest, im sure it would be fun slipping and sliding that beast around!

This IS BS!!!!!.......There was a whole heap of info on the PM35 Manual that has been deleted. Why? Is SAU looking after there members by doing this........NO!!!!!!!

You guy's need to take a serious look at who has deleted this and why!!!!!....the info in this forum is there for people to read and should not be deleted especially since the info was 100% accurate! I don't particularly care about who you get to advertise on this forum as long as they are credible....IF THEY ARE RIPPING OFF YOUR FORUM MEMBERS you should not be using them!!!!

*edit by admins*

YES I am talking about XXX.....If they cannot get there shit together why are you supporting them by cleaning up facts that have bought to light about there shonky dealings!!!!

And yes I am pissed off!!!!!......I would expect you guy's to be more committed to the people that make up your forum/club than the business that blatantly rip them off!!!!

This IS BS!!!!!.......There was a whole heap of info on the PM35 Manual that has been deleted. Why? Is SAU looking after there members by doing this........NO!!!!!!!

You guy's need to take a serious look at who has deleted this and why!!!!!....the info in this forum is there for people to read and should not be deleted especially since the info was 100% accurate! I don't particularly care about who you get to advertise on this forum as long as they are credible....IF THEY ARE RIPPING OFF YOUR FORUM MEMBERS you should not be using them!!!!

YES I am talking about XXX.....If they cannot get there shit together why are you supporting them by cleaning up facts that have bought to light about there shonky dealings!!!!

And yes I am pissed off!!!!!......I would expect you guy's to be more committed to the people that make up your forum/club than the business that blatantly rip them off!!!!

Completely agree with you on this one Craig!

Not sure which posts you mean Craig but you might as well settle down. The forum rules clearly state no member cannot name any business in a negative post. That includes your post that has been editted.

You should expect any posts like that to be deleted by a member or admin.

And before you tell me that is bullshit again, consider that a forum member is currently being sued by a business they posted negative comments about. Luckily for the forums they have not been included in the case, but that may not always be the case.

If you want to put forward comments...just make sure you do not name or clearly imply who the business is. simple.

Fair enough Duncan.....I understand....but you must understand where I am coming from as I am only really looking out for your members and SAU's integrity. My intentions are not malicious! I just feel that noob's buying these cars should not be led up the garden path!

I am not stating facts that are untrue and being a forum that is open to the public the truth is always purposeful and legal!

P.S. I can go to that same importer's website right now and find 4 of the manual pm35's(not to mention the auto's) giving compliance pricing ect.......this is false information! On top of that one of the post's that was deleted clearly stated from that importer that he was not able to compliance any PM35's!. Should this be brought to light....I would think so!

enough said from me......and I don't mind if you wish to discuss this more over the phone as I think you would find what I have to say interesting.

Edited by Jetwreck
  • 8 months later...

Keep in mind final drive ratios... This is something I have been thinking about.

NM35's have a final drive of about 3.0 AFAIK

PNM35 has a final drive of 3.5

Navara 3.7

Don't know about a R34 GT-R 3.27?

So, that means a Navara Gearbox in a PNM35 would prob work, and a GTR gearbox in a NM35 would prob work because they are closer? (from a ratio point of view, not physically fitting)

Thoughts?

Keep in mind final drive ratios... This is something I have been thinking about.

NM35's have a final drive of about 3.0 AFAIK

PNM35 has a final drive of 3.5

Navara 3.7

Don't know about a R34 GT-R 3.27?

So, that means a Navara Gearbox in a PNM35 would prob work, and a GTR gearbox in a NM35 would prob work because they are closer? (from a ratio point of view, not physically fitting)

Thoughts?

Thing is, the front diff isnt part of the gearbox, it gets it's drive from the transfer case; through a forward facing driveshaft, and it's rotational speed is the same as the rear tailshaft, so it's ratio won't change.

The thing you WILL want to look at is the ratio spacing of the gearbox; i.e it may have a very short first gear due to it's use in a 4WD.

did the navara have a hi-lo range transfer case? or was it fixed ratio?

did it even have attesa or was it a fixed 50/50 torque split?

its possible even though its manual its still a bad choice. besides ratios etc

  • 3 weeks later...

desperately need a m35 manual conversion solution...

At the moment the easiest way to do it is a V35 Manual half cut! The one thing that we are all stuck on is the Bellhousing....everything else we can get sorted!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...