Jump to content
SAU Community

Recommended Posts

More results to share, out of one of our OP6 high flowed turbocharger built in 2012 on an R32 GTS4 Skyline. Car made 324AWKWS on E85 fuel internally gated with factory exhaust manifold. Car has built engine, 256 Tomei cams and bolton supporting mods. Car tuned at Japanese motor sports SA.

 

Edited by hypergear
More update with an Billet CBB high flow that can be applied to both OP6 and 21U turbochargers.
44433013_10156020561073865_8165876588076859392_n.jpg?_nc_cat=105%26_nc_ht=scontent.fmel8-1.fna%26oh=563412a7d1c9d8b953c1c7d38f1aad8c%26oe=5CACA387&key=67accc6f5a593865b7ea86ca3881f3333f13dcd2a941f1e50d983b5a98db8a43
44514318_10156020561428865_2087472453679841280_n.jpg?_nc_cat=106%26_nc_ht=scontent.fmel8-1.fna%26oh=d982d7c75633c88bc15f5da9fd05a2be%26oe=5C6D9949&key=a9d8f45d4ae61235b8bfbb673c000f7be82f3be0874ca0defe9053b1ab23db38
I've currently using and its trailed on an R34 GTT that I have modified from scratch, parts and pricing ways Car has:
1. Injectorsonline ID 1000cc injectors + plugs : $750
2. Injectorsonline Walbro pump: $220
3. Korioautoparts Performance Radiator: $180
4. Z32 AFM with plug: $330
5. Nistune ECU plus tune from Chequered Tuning: $995
5. Split fire coil packs from Just Jap: $550
6. Spark plugs: $100
7: Exhaust flapper valve: $75
8: ATR43SS2 ball bearing turbocharger: $1850
9: Ebay intake pipe: $60
10: Trust front mount intercooler kit: $1650
Tuned at Chequrered tuning, Car's pulled 290rwkws at 20psi on pump 98 fuel. 
45093849_10156041687888865_3876730853958615040_n.jpg?_nc_cat=110%26_nc_ht=scontent.fmel8-1.fna%26oh=e720e176ccec1de0020638928c890d4d%26oe=5CA6EB65&key=c646ec76d5bfef02e8f82d31b50bf3473a6e0e7e447f651ce1e61b81ddf356a1
46452373_10156080200008865_5630822998320611328_n.jpg?_nc_cat=109%26_nc_ht=scontent.fmel8-1.fna%26oh=335cbb033ca7b2f9f2d0baaa98f96bd7%26oe=5C6F253C&key=e90e61501d119a3e85366aac0d5d01f3ed823aae29a92ae9a4d40897f466d83e
 
 



Will you do an E85 run also to compare?
Please please please [emoji4][emoji6]
  • 2 weeks later...

Further development in making a 300rwkws P98 high flow. This particular time run one of our prototype G4 profile. 

47579484_10156116579043865_8114015029776

47572460_10156116579233865_5785185312644

a quick note that I've mentioned before, do check your aftermarket 3 inches dump pipe before installation as most of them has a under sized flange cut out.

No automatic alt text available.

after Die-grinding

 

47579312_10156116561193865_3866736198772 

Car's back on the dyno:

Image may contain: car

Made 298.5rwkws with a intercooler restriction:

Image may contain: screen

EBC gain resulted a boost pressure increase before cooler, not after.

No automatic alt text available.

 

Will be back again with a 600x300x100mm Aero flow cooler and see if that makes any changes. 

 

  • Like 1

There are few of them on ebay, I won't be specific on the seller. It requires modifications to fit but  works fine, photo of it: Image may contain: shoes

Edited by hypergear

Hi Tech Round 5 video footage from Isaac Get, R33 GTST powered by one of our ATR43SS2 bolton turbochargers making 290rwkws. Tuneded by DVSJEZ.

 

 

  • 1 month later...

If you contact Tao ask him if he can source a RB20 turbo for you (for the additional cost). He may give you a rebate when you return your turbo to him. He also may choose to not do those things.

I realise we are in a thread by him, about his products where he posted 3 posts ago, but send him a PM as he is very responsive to them.

8 minutes ago, Kinkstaah said:

If you contact Tao ask him if he can source a RB20 turbo for you (for the additional cost). He may give you a rebate when you return your turbo to him. He also may choose to not do those things.

I realise we are in a thread by him, about his products where he posted 3 posts ago, but send him a PM as he is very responsive to them.

It won’t let me private message him. I can’t call since I’m out of the country lol. 

  • 2 weeks later...

Anyone want to buy my ATR45SAT 0.82 (external WG version) w/ Ball Bearing Centre, and v-band rear? I'll include intake pipe, pod, catch can, 3.5" dump/down pipe to suit a low mounted EWG setup. Turbo has literally seen less than 2000km and 1x skid pan day, will easily do over 400kW+

I'm selling as I'm going for a smaller setup.

  • 2 weeks later...
On ‎10‎/‎13‎/‎2010 at 12:10 AM, limpus said:

I'm tired too of pointing out such things...go ahead and claim whatever you want to claim...its up to SAU and your customers to decide...

Indeed, and decided they have. Hypergear is still here and going strong, and, looks like poster above is long gone. Man, been researching a lot of old posts, seems Tao has copped lot of undeserved flak in the past.

Been very happy with my HG hiflow, and now looking to the ATR43 range.

  • Like 2
  • 3 weeks later...

Yes can be done. 

Dyno footage of ATR45SAT Powered R33 GTST, making a super responsive 339rwkws @ 22psi on pump 98 fuel.

 

Video footages from Vic-drift last week at Calder park. Car is an R33 GTST powered by one of our high flowed R33 Turbochargers, making 330rwkws on E85 fuel.

 

 

Edited by hypergear

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...