Jump to content
SAU Community

Recommended Posts

Test run on the Rb bolton internally gated ATR45SAT turbocharger, the external gate has made a huge difference in power gain.  Final result of 362rwkws @ 20psi Internally gated  and 427rwkws @ 25psi Externally gated

Rb25det NEO Stock Cams
Nitto Pistons and Rods. 9:1 CPR
HyperGear ATR45SAT internally gated Rb bolton version Run both internal and externally gated
ID 1500cc injectors
Twin Walbro 525L fuel pump
Adaptronic Plugin ECU
Greedy Profect B EBC
600x300x81mm PWR Cooler kit
3inches turbo back exhaust
4inches intake pipe with Pod
Split fire coil packs

 

powerall.jpg

boostall.jpg

  • Like 2
On 7/26/2020 at 12:27 AM, self_slaughter said:

Thanks all for all the help, I have most of the main pieces of the puzzle ready to go now. :D

ATR45SAT-BB (thanks Tao, she's a little cutie), 1000cc injectors, 460l pump, HPX-N1 maf, Nistunes off getting updated to feature pack 2.1 + having the flex fuel gear installed.

Only hard bit now is the intake piping, which I'm hoping I can just get fabricated by whoever installs it to make life nice and easy. Save me doing bits, towing it to a fabricator, then towing it to a tuner etc. if possible.

On that note, Any recommendations for an installer/tuner in QLD?

Where are you located? In Brisbane I recommend East Coast Customs & Townsville either myself or ShaneFraserMotorsport. A quick google of nistune tuners is a good place to start too

  • 2 weeks later...

Rework on one of the earlier prototypes that did a fairly laggy 552rwkws, Now making a responsive 570rwkws.  As usual, mod list of the car is:

Rb25det NEO Stock Cams
Nitto Pistons and Rods. 9:1 CPR
HyperGear ATR45SS-2 prototype Turbocharger
ID 1500cc injectors
Twin Walbro 525L fuel pump
Adaptronic Plugin ECU
Greedy Profect B EBC
600x300x81mm PWR Cooler kit
3inches turbo back exhaust
4inches intake pipe with Pod
Split fire coil packs
Twin pulse manifold and twin 40mm gate. 
Car made 570rwkws @ 40psi, E85 fuel. With 250rwkws @ 4000RPM

 

 

power.jpg

boost.jpg

  • Like 2
  • 2 months later...

Hi all, after reading 615 pages I’m still confused on which turbo to buy 🤦‍♂️ I have a unopened rb25 neo, fmic, I have a link ecu and a 6 boost manifold waiting to go in, would I be better off with the ART43G3SAT or go for the g3 .82 bb version I have my eye on 750cc injectors to go with it. 
 

cheers 

5 hours ago, Smokey_1507 said:

Hi all, after reading 615 pages I’m still confused on which turbo to buy 🤦‍♂️ I have a unopened rb25 neo, fmic, I have a link ecu and a 6 boost manifold waiting to go in, would I be better off with the ART43G3SAT or go for the g3 .82 bb version I have my eye on 750cc injectors to go with it. 
 

cheers 

Without telling us what your looking for no one can really make a recommendation. How about starting with how much power you want to make and what you'll be using the car for? Street/circuit/drift/drag/etc... 

Also if your going e85 you'll run out of injectors with only 750cc.

  • Like 1
1 hour ago, Murray_Calavera said:

Without telling us what your looking for no one can really make a recommendation. How about starting with how much power you want to make and what you'll be using the car for? Street/circuit/drift/drag/etc... 

Also if your going e85 you'll run out of injectors with only 750cc.

Hi,

I’m looking for anything around the 400-450 bhp mark.. I’m not looking to go forged yet ( maybe in the future) its a road car and the odd drift day. I won’t be going e85 as it’s hard to find in Ireland as it was phased out a few years ago, so it will be regular unleaded  for the c35 laurel ️,   On a side note I have a bio power 9-5 and it’s a shame I can’t get e85 for that too :( 

Edited by Smokey_1507

For 400~450HP mark on P98 fuel I recommend our externally gated ATR43SS2 in .63 rear housing T3 Vband. I can supply external gate exhaust manifold and turbo smart gate assembly with screamer with the turbocharger if needed. 

  • Like 2
  • 1 month later...
On 8/12/2020 at 6:25 PM, hypergear said:

Rework on one of the earlier prototypes that did a fairly laggy 552rwkws, Now making a responsive 570rwkws.  As usual, mod list of the car is:

Rb25det NEO Stock Cams
Nitto Pistons and Rods. 9:1 CPR
HyperGear ATR45SS-2 prototype Turbocharger
ID 1500cc injectors
Twin Walbro 525L fuel pump
Adaptronic Plugin ECU
Greedy Profect B EBC
600x300x81mm PWR Cooler kit
3inches turbo back exhaust
4inches intake pipe with Pod
Split fire coil packs
Twin pulse manifold and twin 40mm gate. 
Car made 570rwkws @ 40psi, E85 fuel. With 250rwkws @ 4000RPM

 

 

power.jpg

boost.jpg

Hi, is the engine in this test still on OEM stock valve springs? thank you.

  • 1 month later...

Pretty cool result to share. ATR43SS-2 BB on a Rb25de+T Neo cracking 390rwkws on E85 fuel on KeepRite drifting machine. Tuned at Dr.Drift.

 

  • 1 month later...

Hi Hypergear, 

I am interested in a 600rwhp capable turbocharger for my built rb25 neo engine 9:1 compression ratio. Will be running a 6 boost manifold (would you suggest a t3/t4 or a v-band inlet?). 

What would be the most responsive turbo you have in this range? 

Thank you.

Hi Blakeo, That will be a similar engine build as my R34GTT. Recommended would be an ATR45SS-1 BB in .63 rear housing in T3 Vband out let. This turbo have managed to pull 520rwkws with stock cams on E85 fuel and making almost 300rwkws by 4000RPM. 

  • 2 weeks later...
carondyno.jpg
Some more results to share, R34 GTR test and tune, I've had this cars in storage for awhile,  if you did spent 250K for a fully unmolested stock one today you will be horribly disappointed with its performance. Stock twins with upgraded cooler, exhaust, and intake managed to pull 238awkws at 15psi, with help of a PS2000 it managed 272awkws @ 17psi, Not fast at all. after getting chopped by a Supercharged TRD Camry, I've decided to do some work to it. And I still believe Rb25dets/Neo are way better engines.
 
power.jpg
 
boost.jpg
 
Looking into further developments in T4 printed turbos. First up is a ball bearing ATR45SS-1 turbocharger in a custom T4 .86 Vband rear housing. Stock Rb26 engine is now fitted with:
APR head studs
HKS Cam gears +9" inlet, 0 exhaust.
R35 GTR coil packs
CAS Trigger kit
Haltec PS2000 ECU
ID 1650cc injectors
Twin 540 Walbro pumps+11m fuel line
Nismo Front mount cooler
T4 high mount exhaust manifold
HyperGear 50mm External gate
HyperGear ATR45SS1 T4 .86 rear
3 inches Trust turbo back exhaust
Final result so far 425kw on all 4 wheels @ 28psi E85 fuel
Tuned at Chequered tuning
Will be testing few different turbo combinations and spend more time with cam adjustments for better response.
turbo.jpg
power.jpg
boost.jpg
Edited by hypergear
  • Like 3

Great result @hypergear I also think that Trust cat back is a restriction, probably has a restrictor hidden somewhere to make it JASMA approved 

Thanks for the tip. Yes I though it might be the case, so I've added a cut out on the front pipe. Highly recommended for power hunting. 

spacer.png

spacer.png

 

Edited by hypergear
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...